Geological Condition and Characteristics for Formation of Deformation Bands - Example from Jizhong Depression, China

Author(s):  
Z.D Liu ◽  
Y.H. Sun ◽  
X.F. Fu ◽  
L.D. Meng
2021 ◽  
Vol 11 (11) ◽  
pp. 5208
Author(s):  
Jianpo Liu ◽  
Hongxu Shi ◽  
Ren Wang ◽  
Yingtao Si ◽  
Dengcheng Wei ◽  
...  

The spatial and temporal distribution of tunnel failure is very complex due to geologic heterogeneity and variability in both mining processes and tunnel arrangement in deep metal mines. In this paper, the quantitative risk assessment for deep tunnel failure was performed using a normal cloud model at the Ashele copper mine, China. This was completed by considering the evaluation indexes of geological condition, mining process, and microseismic data. A weighted distribution of evaluation indexes was determined by implementation of an entropy weight method to reveal the primary parameters controlling tunnel failure. Additionally, the damage levels of the tunnel were quantitatively assigned by computing the degree of membership that different damage levels had, based on the expectation normalization method. The methods of maximum membership principle, comprehensive evaluation value, and fuzzy entropy were considered to determine the tunnel damage levels and risk of occurrence. The application of this method at the Ashele copper mine demonstrates that it meets the requirement of risk assessment for deep tunnel failure and can provide a basis for large-scale regional tunnel failure control in deep metal mines.


2021 ◽  
Vol 13 (1) ◽  
pp. 820-834
Author(s):  
Jun Ma ◽  
Zhifang Zhou

Abstract The exploration of the origin of hot spring is the basis of its development and utilization. There are many low-medium temperature hot springs in Nanjing and its surrounding karst landform areas, such as the Tangshan, Tangquan, Lunshan, and Xiangquan hot springs. This article discusses the origin characters of the Lunshan hot spring with geological condition analysis, hydrogeochemical data, and isotope data. The results show that the hot water is SO4–Ca type in Lunshan area, and the cation content of SO4 is high, which are related to the deep hydrogeological conditions of the circulation in the limestone. Carbonate and anhydrite dissolutions occur in the groundwater circulation process, and they also dominate the water–rock interaction processes in the geothermal reservoir of Lunshan. The hot water rising channels are deeply affected by the NW and SN faults. Schematic diagrams of the conceptual model of the geothermal water circulation in Lunshan are plotted. The origin of Tangshan, Tangquan, and Xiangquan hot springs are similar to the Lunshan hot spring. In general, the geothermal water in karst landforms around Nanjing mainly runs through the carbonate rock area and is exposed near the core of the anticlinal structure of karst strata, forming SO4–Ca/SO4–Ca–Mg type hot spring with the water temperature less than 60°C. The characters of the hot springs around Nanjing are similar, which are helpful for the further research, development, and management of the geothermal water resources in this region.


2019 ◽  
Author(s):  
Yiming Zhang ◽  
Jianzhang Tian ◽  
Dexiang Yang ◽  
Shuguang Chen ◽  
Xing Liu ◽  
...  

2012 ◽  
Vol 204-208 ◽  
pp. 1830-1833
Author(s):  
Jing Zhou ◽  
Xi Ming Liu ◽  
Xian Li Qin ◽  
Shu Ren Xing

Freeze roadway cooling technology is delivering cold quantity to cooling underground face by storage cooling energy in strata, and the effect of storaging cold is critical. The geographical position and geological condition of coal mine in Heilongjiang Province has remarkable characteristics. The feasibility of freeze roadway cooling measure was demonstrated on temperature, geothermal, constant temperature strata and frozen soil layer, etc. by analyzed its advantage adequately. The measure provides a new idea which suits the native situation for prevent the heat-harm in coal mine, it also has the realistic reference value and is worth popularizing.


2002 ◽  
Vol 82 (16) ◽  
pp. 3129-3147 ◽  
Author(s):  
S. X. Li ◽  
X. W. Li ◽  
Z. F. Zhang ◽  
Z. G. Wang ◽  
K. Lu

2011 ◽  
Vol 704-705 ◽  
pp. 903-906
Author(s):  
Yun Li Feng ◽  
Shao Qiang Yuan ◽  
Meng Song

The microstructure evolution of a medium-carbon Si-Mn steel during deformation of undercooled austenite at different degree of deformation, temperatures and strain rates has been investigated by means of a hot compression simulation test, metallographic microscope, scanning electron microscope and transmission electron microscopy. Also, the mechanism of carbide spheroidized during deformed process has been discussed. The experiment results demonstrate that the process of evolution experienced three stages: that is, strain-induced transformation, austenite eutectoid decomposed to carbides and ferrite matrix, and spheroidization of pearlite at the range of A3-Ar3. The austenitic grains would be refined for the extra-product of ferrite above the Ar3. The eutectoid reaction was induced on the grain boundaries of ferrite and non-transformed austenite and deformation bands with the increasing volume of deformation. An optimum combination of deformation temperature and strain rate is important to obtian the dulplex microstructure consisting of ultrafine ferrites and dispersed carbide particles. The fine spheroidized microstructures are obtained while the deformed temperature reaches 650°C with ≥1.0, meanwhile, The carbides precipate in globular and shot-rod shapes. Keywords: Medium-carbon Si-Mn steel, Undercooled austentite, Microstructure evolution, Deformation induced transformation, Carbide spheroidization


Sign in / Sign up

Export Citation Format

Share Document