Performance of dental impression materials: Benchmarking of materials and techniques by three-dimensional analysis

The purpose of this study was to evaluate the dimensional stability of heavy and light bodied condensation silicones after immersion in disinfectant solution for 10 or 20 minutes. The impression materials were Optosil Comfort and Xantopren VL Plus and the disinfectant solutions were 1% sodium hypochlorite and 2% glutaraldehyde. Impressions were made on a perforated stainless steel tray, according to the American Dental Association specification No. 19, adding up to a total of 50 samples. The double mixing method (one time, two viscosities) was used. Impressions were removed from the roulette block after 7 minutes to ensure complete curing and then immersed in the solutions. Impressions not submitted to treatment composed the control group. After these steps, the impressions were removed from the solution, rinsed in running water and air-dried. Three-dimensional measurements were calculated using an optic microscope graduated at 0.001 mm. The two-way ANOVA indicated no differences (p>0.05) for any combination between variables. The results showed that the solution studied can be safely used to disinfect condensation silicone in clinical prosthodontic procedures.

Download Full-text

Reduction of Metal Artifact in Three-Dimensional Computed Tomography (3D CT) with Dental Impression Materials

2007 29th Annual International Conference of the IEEE Engineering in Medicine and Biology Society ◽

10.1109/iembs.2007.4353084 ◽

2007 ◽

Cited By ~ 3

Author(s):

W. S. Park ◽

K. D. Kim ◽

H. K. Shin ◽

S. H. Lee

Keyword(s):

Computed Tomography ◽

Three Dimensional ◽

Metal Artifact ◽

3D Ct ◽

Impression Materials ◽

Dental Impression

Download Full-text

In situ investigation of the primary recrystallization of alpha titanium in HVEM

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100110313 ◽

1978 ◽

Vol 36 (1) ◽

pp. 634-635

Author(s):

S. Naka ◽

R. Penelle ◽

R. Valle

Keyword(s):

Dimensional Analysis ◽

Texture Evolution ◽

Cold Work ◽

Three Dimensional ◽

Primary Recrystallization ◽

Thin Foils ◽

In Situ Investigation ◽

Grain Growth Model ◽

Alpha Titanium

The in situ experimentation technique in HVEM seems to be particularly suitable to clarify the processes involved in recrystallization. The material under investigation was unidirectionally cold-rolled titanium of commercial purity. The problem was approached in two different ways. The three-dimensional analysis of textures was used to describe the texture evolution during the primary recrystallization. Observations of bulk-annealed specimens or thin foils annealed in the microscope were also made in order to provide information concerning the mechanisms involved in the formation of new grains. In contrast to the already published work on titanium, this investigation takes into consideration different values of the cold-work ratio, the temperature and the annealing time.Two different models are commonly used to explain the recrystallization textures i.e. the selective grain growth model (Beck) or the oriented nucleation model (Burgers). The three-dimensional analysis of both the rolling and recrystallization textures was performed to identify the mechanismsl involved in the recrystallization of titanium.

Download Full-text