FFBPNN-BASED HIGH DROWSINESS CLASSIFICATION USING EMG AND WPT

2020 ◽  
Vol 32 (03) ◽  
pp. 2050023 ◽  
Author(s):  
Mousa Kadhim Wali
Keyword(s):  
Neural Network ◽  
Wavelet Packet ◽  
Back Propagation ◽  
Back Propagation Neural Network ◽  
Road Accidents ◽  
Mean Values ◽  
Physiological Signal ◽  
Feed Forward Back Propagation ◽  
Emg Signal ◽  
Amplitude Level

The detection of drowsiness level is important because it is the main reason for fatal road accidents. Electromyography of the upper arm and shoulder is an important physiological signal affected by drivers’ drowsiness, in which its amplitude level and frequency band of the sleep-deprived case are different than those of the alert state. Therefore depending on electromyography (EMG), its drowsiness frequency (80–100[Formula: see text]Hz) was detected in order to determine high drowsiness state based on wavelet packet transform (WPT) which decomposes the EMG signal into its approximation and detail coefficients up to level 4 using db2, db7, sym5 and coif5 wavelets. In this research after extraction, the two higher order statistical features, kurtosis and skewness, are computed from 3[Formula: see text]s window of the three EMG channels, and analysis of variance test is used to check whether their mean values are different for the different classes as both [Formula: see text]-values are less than 0.005 under db2 wavelet. Therefore, they were supplied to feed forward back propagation neural network (FFBPNN) as this type of neural network is used for distinguishing and classification purposes for different objects. They obtained an accuracy of 75% for detecting high levels among other levels of normal and low drowsiness with an average sensitivity of 78.63% and specificity of 75.97% because the spectrum of the EMG alert (non-drowsiness) signal of 80–100 Hz is different from that of drowsy 80–90[Formula: see text]Hz and high drowsy 78–95[Formula: see text]Hz signals.

scholarly journals A Framework for Prediction of Household Energy Consumption Using Feed Forward Back Propagation Neural Network

Technologies ◽  
2019 ◽  
Vol 7 (2) ◽  
pp. 30 ◽  
Author(s):  
Muhammad Fayaz ◽  
Habib Shah ◽  
Ali Aseere ◽  
Wali Mashwani ◽  
Abdul Shah
Keyword(s):  
Neural Network ◽  
Performance Evaluation ◽  
Energy Consumption ◽  
Data Acquisition ◽  
Residential Buildings ◽  
Back Propagation ◽  
Back Propagation Neural Network ◽  
Statistical Moments ◽  
Feed Forward ◽  
Feed Forward Back Propagation

Energy is considered the most costly and scarce resource, and demand for it is increasing daily. Globally, a significant amount of energy is consumed in residential buildings, i.e., 30–40% of total energy consumption. An active energy prediction system is highly desirable for efficient energy production and utilization. In this paper, we have proposed a methodology to predict short-term energy consumption in a residential building. The proposed methodology consisted of four different layers, namely data acquisition, preprocessing, prediction, and performance evaluation. For experimental analysis, real data collected from 4 multi-storied buildings situated in Seoul, South Korea, has been used. The collected data is provided as input to the data acquisition layer. In the pre-processing layer afterwards, several data cleaning and preprocessing schemes are applied to the input data for the removal of abnormalities. Preprocessing further consisted of two processes, namely the computation of statistical moments (mean, variance, skewness, and kurtosis) and data normalization. In the prediction layer, the feed forward back propagation neural network has been used on normalized data and data with statistical moments. In the performance evaluation layer, the mean absolute error (MAE), mean absolute percentage error (MAPE), and root mean squared error (RMSE) have been used to measure the performance of the proposed approach. The average values for data with statistical moments of MAE, MAPE, and RMSE are 4.3266, 11.9617, and 5.4625 respectively. These values of the statistical measures for data with statistical moments are less as compared to simple data and normalized data which indicates that the performance of the feed forward back propagation neural network (FFBPNN) on data with statistical moments is better when compared to simple data and normalized data.

Power Quality Disturbance Classification Using Wavelet Packet Transform and Back Propagation Algorithm

2016 ◽  
Vol 13 (10) ◽  
pp. 7099-7109
Author(s):  
M. K Elango ◽  
A Jagadeesan ◽  
K. Mohana Sundaram
Keyword(s):  
Neural Network ◽  
Power Quality ◽  
Virtual Instrument ◽  
Wavelet Packet ◽  
Back Propagation ◽  
Back Propagation Neural Network ◽  
Wavelet Packet Transform ◽  
Back Propagation Algorithm ◽  
Propagation Algorithm ◽  
Power Quality Disturbances

This paper develops a real time solution for detecting the Power Quality events. Fourteen events are generated through experimental setup and the signals are acquired through a voltage Data Acquisition Card, NI DAQ-9225, controlled by a Virtual Instrument software package. The features extracted from the Wavelet Transformation are fed into the Back Propagation Neural Network for training. By the virtue of a Neural Network property, it gets self-adapted and self-learned aiding in automatic classification of Power Quality Events. A combination of Wavelet Transform technique and Neural Networks are employed to detect and characterize the Power Quality Disturbances. The result obtained shows the effectiveness of the Wavelet Packet Transform based Back Propagation algorithm in classifying the Power Quality Disturbances. The results produced by the proposed methodology based Back Propagation Algorithm is verified with the Power Quality Analyser.

scholarly journals Isobaric vapour-liquid equilibrium calculations of binary systems using neural network

2004 ◽  
Vol 69 (8-9) ◽  
pp. 669-674 ◽  
Author(s):  
Mehmet Bilgin
Keyword(s):  
Neural Network ◽  
Binary Systems ◽  
Back Propagation ◽  
Back Propagation Neural Network ◽  
Liquid Equilibrium ◽  
Chemical Structures ◽  
Feed Forward Back Propagation ◽  
The Neural Network ◽  
Classical Models ◽  
Vle Data

A model on a feed forward back propagation neural network was employed to calculate the isobaric vapour?liquid equilibrium (VLE) data at 40, 66.67, and 101.32 ??0.02 kPa for the methylcyclohexane ? toluene and isopropanol ? methyl isobutyl ketone binary systems, which are composed of different chemical structures (cyclic, aromatic, alcohol and ketone) and do not show azeotrope behaviour. Half of the experimental VLE data only were assigned into the designed framework as training patterns in order to estimate the VLE data over the whole composition range at the mentioned pressures. The results were compared with the data calculated by the two classical models used in this field, the UNIFAC and Margules models. In all cases the deviations the experimental activity coefficients and those calculated by the neural network model (NNET) were lower than those obtained using the Margules and UNIFAC models.

Prediction of infection and death ratio of CoVID-19 virus in Turkey by using artificial neural network (ANN)

Coronaviruses ◽  
2020 ◽  
Vol 01 ◽  
Author(s):  
Andaç Batur Çolak
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Death Rate ◽  
Back Propagation ◽  
Back Propagation Neural Network ◽  
World Health ◽  
Feed Forward Back Propagation ◽  
The World ◽  
Artificial Neural ◽  
Health Organization

Background: For the first time in December 2019 as reported in the Whuan city of China COVID-19 deadly virus, spread rapidly around the world and the first cases were seen in Turkey on March 11, 2020. On the same day, a pandemic was declared by the World Health Organization due to the rapid spread of the disease throughout the world. Methods: In this study, a multilayered perception feed-forward back propagation neural network has been designed for predicting the spread and mortality rate of COVID-19 virus in Turkey. COVID-19 data from six different countries were used in the design of the artificial neural network, which has 15 neurons in its hidden layer. 70% of these optimized data were used for training, 20% for validation and 10% for testing. Results: The resulting simulation results, COVID-19 virus in Turkey between 20 and 37 days showed the fastest to rise. The number of cases for the 20th day was predicted to be 13.845 and the 51st day for the 37th day. Conclusion: As for the death rate, it was predicted that a rapid rise on the 20th day would start and a slowdown around the 43rd day and progress towards the zero case point. The death rate for the 20th day was predicted to be 170 and the 43rd day for the 1.960s.

Sign in / Sign up

Export Citation Format

Share Document