Security Constrained Economic Dispatch

Author(s):  
Lizhi Wang ◽  
Nan Kong

The main objective of electric power dispatch is to provide electricity to the customers at low cost and high reliability. Transmission line failures constitute a great threat to the electric power system security. We use a Markov decision process (MDP) approach to model the sequential dispatch decision making process where demand level and transmission line availability change from hour to hour. The action space is defined by the electricity network constraints. Risk of the power system is the loss of transmission lines, which could cause involuntary load shedding or cascading failures. The objective of the model is to minimize the expected long-term discounted cost (including generation, load shedding, and cascading failure costs). Policy iteration can be used to solve this model. At the policy improvement step, a stochastic mixed integer linear program is solved to obtain the optimal action. We use a PJM network example to demonstrate the effectiveness of our approach.

Author(s):  
Lizhi Wang ◽  
Nan Kong

The main objective of electric power dispatch is to provide electricity to the customers at low cost and high reliability. Transmission line failures constitute a great threat to the electric power system security. We use a Markov decision process (MDP) approach to model the sequential dispatch decision making process where demand level and transmission line availability change from hour to hour. The action space is defined by the electricity network constraints. Risk of the power system is the loss of transmission lines, which could cause involuntary load shedding or cascading failures. The objective of the model is to minimize the expected long-term discounted cost (including generation, load shedding, and cascading failure costs). Policy iteration can be used to solve this model. At the policy improvement step, a stochastic mixed integer linear program is solved to obtain the optimal action. We use a PJM network example to demonstrate the effectiveness of our approach.


2020 ◽  
Vol 21 (2) ◽  
pp. 87
Author(s):  
Juara Mangapul Tambunan ◽  
Hary Mulyono

Transmission line is a very absolute thing in an electric power system. In the distribution of electricity from generating centers to loads (consummers), where the distance is quite far it is done through the transmission line. Transmission channels those are generally used based on construction are the lattice type and steel pole. The transmission channel has a safe limit against other objects around it according to the standard set. The air transmission line uses a TACSR (Thermal Aluminium Conductor Steel Reinforce) conductor which has a working capacity with temperatures up to 1500C. Based on calculations when the distance is 212m with a  temperature of  1500C the value of the roof is 9,40m. When the distance is 173m with a  temperature of  1500C the maximum value of the roof is 7.8m. When The condition of the temperature and the length of the span affect the value of the roof the greater of the temperature and the length of the span, so the greater of the resistance.ABSTRAK:Saluran transmisi adalah suatu hal yang sangat mutlak dalam suatu sistem tenaga listrik. Dalam penyaluran tenaga listrik dari pusat-pusat pembangkit ke beban (konsumen), dimana jaraknya cukup jauh maka dilakukan lewat saluran transmisi. Saluran transmisi yang umum digunakan berdasarkan konstruksinya adalah tipe lattice dan steel pole. Saluran transmisi ini memiliki batas aman terhadap obyek lain yang ada di sekitarnya sesuai standar yang ditetapkan. Saluran transmisi udara menggunakan konduktor jenis TACSR (Thermal Aluminium Conductor Steel Reinforced) yang memiliki kemampuan kerja dengan suhu sampai 1500C. Berdasarkan perhitungan pada saat jarak span 212 m dan dengan suhu 1500C andongan maksimumnya bernilai 9,40 m. Pada saat jarak 173 m dan dengan suhu 1500C andongan maksimalnya 7,8m. Pada saat jarak 233 m dengan suhu 1500C andongan maksimumnya adalah 10,58m. Keadaan suhu dan panjang span mempengaruhi nilai andongan, semakin besar suhu dan panjang span maka nilai andongan akan semakin besar.


Energies ◽  
2018 ◽  
Vol 12 (1) ◽  
pp. 67 ◽  
Author(s):  
Jian Hu ◽  
Xiaofu Xiong ◽  
Jing Chen ◽  
Wei Wang ◽  
Jian Wang

The overload degree of a transmission line is represented by currents in traditional overload protection, which cannot reflect its safety condition accurately. The sudden rise in transmission line current may lead to cascading tripping under traditional protection during power flow transfer in a power system. Therefore, timely and accurate analysis of the transient temperature rise of overhead transmission lines, revealing their overload endurance capability under the premise of ensuring safety, and coordination with power system controls can effectively eliminate overloading. This paper presents a transient temperature calculation method for overhead transmission lines based on an equivalent thermal network. This method can fully consider the temperature-dependent characteristics with material properties, convective heat resistance, and radiation heat and can accurately calculate the gradient distribution and response of the conductor cross-section temperature. The validity and accuracy of the proposed calculation method are verified by a test platform. In addition, a multi-parameter thermal protection strategy is proposed on the basis of the abovementioned calculation method. The protection can adequately explore the maximum overload capability of the line, and prevent from unnecessary tripping to avoid the expansion of accidents. Finally, the validity of the proposed protection is verified by the modified 29-bus system.


Energies ◽  
2019 ◽  
Vol 12 (13) ◽  
pp. 2472 ◽  
Author(s):  
Changyu Zhou ◽  
Guohe Huang ◽  
Jiapei Chen

In this study, a type-2 fuzzy chance-constrained fractional integrated programming (T2FCFP) approach is developed for the planning of sustainable management in an electric power system (EPS) under complex uncertainties. Through simultaneously coupling mixed-integer linear programming (MILP), chance-constrained stochastic programming (CCSP), and type-2 fuzzy mathematical programming (T2FMP) techniques into a fractional programming (FP) framework, T2FCFP can tackle dual objective problems of uncertain parameters with both type-2 fuzzy characteristics and stochastic effectively and enhance the robustness of the obtained decisions. T2FCFP has been applied to a case study of a typical electric power system planning to demonstrate these advantages, where issues of clean energy utilization, air-pollutant emissions mitigation, mix ratio of renewable energy power generation in the entire energy supply, and the displacement efficiency of electricity generation technologies by renewable energy are incorporated within the modeling formulation. The suggested optimal alternative that can produce the desirable sustainable schemes with a maximized share of clean energy power generation has been generated. The results obtained can be used to conduct desired energy/electricity allocation and help decision-makers make suitable decisions under different input scenarios.


Energies ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 716
Author(s):  
Karol Wawrzyniak ◽  
Endika Urresti Padrón ◽  
Wojciech Jaworski ◽  
Roman Korab

Risk-based redispatch optimization is proposed as a methodology to support the Transmission System Operator (TSO) with preventive remedial actions obtained by extending the security-constrained unit commitment/economic dispatch with constraints resulting from the risk assessed for the power system. Although being heuristic, the methodology is based on comprehensive dynamic security assessment as time-domain simulations are used, allowing to express the degree of all types of instabilities, e.g., caused by contingencies, in monetary terms. Therefore, the risk is assessed as the expected value of the cost incurred by the TSO. Such an approach forms a new pathway to including risk in planning procedures already used by TSOs. Results obtained for the IEEE39 dynamic power system, with costs assigned to load shedding and generator tripping due to single transmission lines short-circuits, are shown as a reference case.


2013 ◽  
Vol 448-453 ◽  
pp. 1767-1772
Author(s):  
Xiong Feng He ◽  
Xian Yun Li ◽  
Tong Zhou Ji ◽  
Hao Peng ◽  
Kun Liu

For enhancing low voltage ride though (LVRT) capability, this paper proposes a new protection scheme of series dynamic breaking resistor (SDBR) connected to the grid-side inverter (GSI) of directly driven permanent magnet synchronous generator (D-PMSG) wind power system, which has a lot of advantages such as possessing low cost, simple structure and high reliability. The structure, switching control strategy and matched resistance of SDBR are researched. The proposed scheme was then applied to uplift GSI voltage during a fault, maintain active power delivered to grid, inhibit DC-link overvoltage and GSI overcurrent. The simulation analysis shows that the SDBR can substantially improve the LVRT capacity of D-PMSG wind power system in PSCAD/EMTDC.


2014 ◽  
Vol 672-674 ◽  
pp. 799-802
Author(s):  
Xiao Gang Li ◽  
Li Xue Li ◽  
Yi Hui Zheng ◽  
Xin Wang ◽  
Jian You Yu ◽  
...  

Lightning overvoltage often leads to transmission lines trip, which is the weak link of power system. In this paper, 110-kV transmission line model is studied on the basis of the EMTP software. Several simulation models are established for back flashover lightning, induced lightning, shield failure. The transient process of lightning stroke is studied. According to the contrast of simulation results of three kinds of lightning, a set of discriminant basis to distinguish lightning on transmission line is put forward.


2014 ◽  
Vol 15 (6) ◽  
pp. 513-526
Author(s):  
Wanjing Xiu ◽  
Yuan Liao

Abstract Transmission lines are essential components of electric power grids. Diverse power system applications and simulation based studies require transmission line parameters including series resistance, reactance, and shunt susceptance, and accurate parameters are pivotal in ensuring the accuracy of analyses and reliable system operation. Commercial software packages for performing power system studies usually have their own databases that store the power system model including line parameters. When there is a physical system model change, the corresponding component in the database of the software packages will need to be modified. Manually updating line parameters are tedious and error-prone. This paper proposes a solution for streamlining the calculation of line parameters and updating of their values in respective software databases. The algorithms used for calculating the values of line parameters are described. The software developed for implementing the solution is described, and typical results are presented. The proposed solution is developed for a utility and has a potential to be put into use by other utilities.


2015 ◽  
Vol 16 (3) ◽  
pp. 233-241 ◽  
Author(s):  
Mohamad Nassereddine ◽  
Jamal Rizk ◽  
Mahmood Nagrial ◽  
Ali Hellany

Abstract High-voltage earthing system design is required to ensure safety compliance and adequate operation of the high-voltage infrastructures. The transmission lines form a solid part of the high-voltage infrastructure. The underground to overhead (UGOH) pole earth grid is one of the main challenges when it comes to transmission line earthing system design. To ensure safety compliance at low cost, counterpoise earthing is used at the UGOH pole for the underground lines. The counterpoise aids in lowering the UGOH pole earth grid resistance. This paper addresses the counterpoise analysis as currently being studied. Furthermore, it introduces the counterpoise mutual voltage between the faulted phase and the counterpoise and its impact at the UGOH pole earth potential rise. Case study is included.


Sign in / Sign up

Export Citation Format

Share Document