Research on Properties of PZT Piezoelectric Ceramics by Finite Element Softeware ADINA

2011 ◽  
Vol 130-134 ◽  
pp. 3233-3236
Author(s):  
Chen Jie Guo ◽  
Chang Song Zhang
Keyword(s):  
Finite Element ◽  
Geometric Model ◽  
Piezoelectric Ceramics ◽  
Element Model ◽  
Analysis Software ◽  
Element Analysis ◽  
Piezoelectric Structure ◽  
Coupling Calculation ◽  
Simulation Results ◽  
The Finite Element Model

In this paper, the finite element model of piezoelectric ceramics in line with the experiment results was established according to piezoelectric structure field and the coupling of the electric field, deformation of representative PZT piezoelectric ceramics under the voltage was analysed in using finite element analysis software ADINA according to establishing geometric model, defining boundary conditions and materials, Coupling calculation. Consistency between simulation results and experimental results is improved and lay the foundation for the realization of the piezoelectric ceramic shapes and vibration control.

Analysis of PZT Piezoelectric Ceramics Based on Finite Element Softeware ADINA

2011 ◽  
Vol 284-286 ◽  
pp. 1456-1459 ◽  
Author(s):  
Chang Song Zhang ◽  
Chen Jie Guo
Keyword(s):  
Finite Element ◽  
Boundary Conditions ◽  
Piezoelectric Ceramic ◽  
Geometric Model ◽  
Piezoelectric Ceramics ◽  
Element Model ◽  
Analysis Software ◽  
Element Analysis ◽  
Piezoelectric Structure ◽  
The Finite Element Model

Using traditional experiment means on piezoelectric ceramic device has certain limitations due to the complicated boundary conditions and stress situation. In this paper, the finite element model of piezoelectric ceramics in line with the experiment results was established according to piezoelectric structure field and the coupling of the electric field, deformation of representative PZT piezoelectric ceramics under the voltage was analysed in using finite element analysis software ADINA according to establishing geometric model, defining boundary conditions and materials, Coupling calculation. Consistency between simulation results and experimental results is improved and lay the foundation for the realization of the piezoelectric ceramic shapes and vibration control.

CT Based Three Dimensional Geometric Model of Cervical Spine

2013 ◽  
Vol 273 ◽  
pp. 588-592
Author(s):  
Zhi Yuan Yan ◽  
Dong Mei Wu ◽  
Li Tao Zhang ◽  
Jun Zhao
Keyword(s):  
Finite Element ◽  
Cervical Spine ◽  
Geometric Model ◽  
Three Dimensional ◽  
Element Model ◽  
Skeletal System ◽  
High Quality ◽  
Element Analysis ◽  
Dimensional Reconstruction ◽  
The Finite Element Model

In order to obtain high-quality analytical results of the finite element model, it is essential to construct a three dimensional geometric model. The paper reconstructed an accurate three dimensional geometric model of cervical spine segments (C4-C7). The process of reconstruction included three-dimensional reconstruction, smooth processing, contour generation, grid generation and fitting surface. Moreover, the result of reconstruction was evaluated ultimately. The model was validated to be smooth and reasonable, and could meet the requirements of finite element analysis. The method is not merely applied to reconstruct the geometric model of the cervical spine. It is a way to construct the model of the skeletal system of the human body.

Finite Element Analysis of the Greenhouse Canopy Effect with Seismic Load

2011 ◽  
Vol 368-373 ◽  
pp. 1125-1129
Author(s):  
Chang Jiang Liu ◽  
Jin Long Wang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Seismic Analysis ◽  
Element Model ◽  
Seismic Load ◽  
Analysis Software ◽  
Element Analysis ◽  
Canopy Effect ◽  
The Finite Element Analysis ◽  
The Finite Element Model

The finite element model about greenhouse canopy of seismic analysis was setted up, The finite element analysis software ANSYS was used to study structure displacement, stress analysis on greenhouse shed. The results showed that the dangerous part of the canopy were located on upper chord members,lower chord members, web members of the framework and the lower and upper, the inside of both sides of the wall with seismic load.Corresponding to this results ,the main destroied form were the framework damage caused by the bending deformation of upper chord members, lower chord members and the upper web members and the unstability caused by the distortion of both sides of the wall.

Research on Applied Technology in the Optimization of the Naval Gun Bracket with Mechanical Properties

2014 ◽  
Vol 1014 ◽  
pp. 199-202
Author(s):  
Shuai Chen
Keyword(s):  
Finite Element ◽  
Necessary Conditions ◽  
Element Model ◽  
Three Dimension ◽  
Analysis Software ◽  
Element Analysis ◽  
Applied Technology ◽  
Naval Gun ◽  
Dynamics Response ◽  
The Finite Element Model

In the paper, the three-dimension model of the naval gun including barrel, cradle, bracket .etc has been built in the environment of Pro/E, which Provides the necessary conditions for the building of the dynamics equivalent mode. Then, finite element analysis software ABAQUS had been used to create the finite element model of the naval gun. Apply the above model to simulate the process of shooting with an angular altitude of zero. The characteristics of structural dynamics response of the gun are obtained through analysis. Through the comparison from the result, the stiffness and strength of the naval gun is verified and the basis to improve the firing accuracy is provided. With the method of this thesis, much work such as verifying scheme, finding design bug, verifying firing accuracy, evaluating stiffness and strength of the gun can be done through simulation in the stage of gun design, then period of design is shorted and cost of design is also reduced.

Vibration Characteristic Analysis of the Barrel

2014 ◽  
Vol 1014 ◽  
pp. 143-146
Author(s):  
Shuai Chen ◽  
Cun Gui Yu
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Element Model ◽  
Vibration Characteristic ◽  
Analysis Software ◽  
Characteristic Analysis ◽  
Modal Shape ◽  
Element Analysis ◽  
Vibration Modal ◽  
The Finite Element Model

This study is based on the graduation design for undergraduate course. In the paper, finite element analysis software ANSYS had been used to create the finite element model of a cannon barrel. On this basis, the vibration modal analysis of the barrel was conducted. Through the model analysis, the natural frequency and modal shape of the cannon barrel was obtained. The situations of stiffness strength and elasticity deformation about each part of the barrel were got by analysis of the modal shape. By this way, we can verify the rationality of the barrel design .Also it can provide improvements of the weak place of the structure for people to improve the stiffness and shooting precision of the gun, in order to make the dynamics characteristics of the gun more reasonable.

Comparison of the Load with Different Loading Ways in the Finite Element Model of the Mobile Air Compressor Frame

2014 ◽  
Vol 599-601 ◽  
pp. 237-241
Author(s):  
Hui Jun Yin ◽  
Yuan Yuan Liu ◽  
Zhao Sun ◽  
Xiao Li Hong
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Working Conditions ◽  
Element Model ◽  
Engine Fuel ◽  
Concentrated Force ◽  
Element Analysis ◽  
Air Compressor ◽  
Simulation Results ◽  
The Finite Element Model

Taking a mobile air compressor frame as object of the research, for the load generated by the weight of engine, fuel tank and the cooler which are installed on the frame, adding mass and concentrated force are two methods which is used to simulate modeling.Under the working conditions of being hoisted ,combined with the stress-strain electrical experiment , finite element analysis was carried out on the model which is established, then the simulation results of two models were analyzed. It turned out that the established model is credible. For the issue of the load on the frame, it proves that adding mass to simulate the load is a practical and efficient way for modeling.

Finite Element Analysis of Damping Plate for the Airbag Vibration Damper

2012 ◽  
Vol 152-154 ◽  
pp. 1483-1486
Author(s):  
Jin Long Wang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Stress Distribution ◽  
Element Model ◽  
Vibration Damper ◽  
Element Analysis ◽  
Vibration Attenuation ◽  
Simulation Results ◽  
Displacement Diagram ◽  
The Finite Element Model

The finite element model of damping plate for the airbag Vibration Damper was established.Displacement and stress analysis of the damping plate structure was done by means of software ANSYS,and the displacement diagram and effective stress distribution of the of damping plate were obtained. The simulation results indicate that the bottom zones of damping plate , which bear considerably great forces,and the displacement variation of the hole have less influence, it could satisfy the demand of sustained vibration attenuation.

Redrawing Operation a Star Shape from Cylindrical Shape Using Experimental and FE Analysis

2020 ◽  
Vol 38 (1A) ◽  
pp. 25-32
Author(s):  
Waleed Kh. Jawad ◽  
Ali T. Ikal
Keyword(s):  
Finite Element ◽  
Effective Strain ◽  
Element Model ◽  
Cylindrical Shape ◽  
Element Analysis ◽  
Punch Force ◽  
Maximum Value ◽  
Element Simulation ◽  
Blank Sheet ◽  
The Finite Element Model

The aim of this paper is to design and fabricate a star die and a cylindrical die to produce a star shape by redrawing the cylindrical shape and comparing it to the conventional method of producing a star cup drawn from the circular blank sheet using experimental (EXP) and finite element simulation (FES). The redrawing and drawing process was done to produce a star cup with the dimension of (41.5 × 34.69mm), and (30 mm). The finite element model is performed via mechanical APDL ANSYS18.0 to modulate the redrawing and drawing operation. The results of finite element analysis were compared with the experimental results and it is found that the maximum punch force (39.12KN) recorded with the production of a star shape drawn from the circular blank sheet when comparing the punch force (32.33 KN) recorded when redrawing the cylindrical shape into a star shape. This is due to the exposure of the cup produced drawn from the blank to the highest tensile stress. The highest value of the effective stress (709MPa) and effective strain (0.751) recorded with the star shape drawn from a circular blank sheet. The maximum value of lamination (8.707%) is recorded at the cup curling (the concave area) with the first method compared to the maximum value of lamination (5.822%) recorded at the cup curling (the concave area) with the second method because of this exposure to the highest concentration of stresses. The best distribution of thickness, strains, and stresses when producing a star shape by

Analysis of Hydroelectric Unit’s Upper Bracket Based on Test and FEM

2014 ◽  
Vol 721 ◽  
pp. 131-134
Author(s):  
Mi Mi Xia ◽  
Yong Gang Li
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Element Model ◽  
The Finite Element Method ◽  
Ansys Software ◽  
Element Analysis ◽  
Hydroelectric Unit ◽  
The Finite Element Analysis ◽  
Strain Rosette ◽  
The Finite Element Model

To research the load upper bracket of Francis hydroelectric unit, then established the finite-element model, and analyzed the structure stress of 7 operating condition points with the ANSYS software. By the strain rosette test, acquired the data of stress-strain in the area of stress concentration of the upper bracket. The inaccuracy was considered below 5% by analyzing the contradistinction between the finite-element analysis and the test, and match the engineering precision and the test was reliable. The finite-element method could be used to judge the stress of the upper bracket, and it could provide reference for the Structural optimization and improvement too.

Influence of Laser Shock Processing on the Weld Line and Finite Element Simulation

2011 ◽  
Vol 464 ◽  
pp. 627-631
Author(s):  
Jie Zhang ◽  
Ai Hua Sun ◽  
Le Zhu ◽  
Xiang Gu
Keyword(s):  
Residual Stress ◽  
Finite Element ◽  
Welding Residual Stress ◽  
Laser Shock ◽  
Analysis Software ◽  
Laser Shock Processing ◽  
Element Analysis ◽  
Welding Line ◽  
Simulation Results ◽  
Shock Processing

Welding residual stress is one of the main factors that affect the strength and life of components. In order to explore the effect on residual stress of welding line by laser shock processing, finite element analysis software ANSYS is used to simulate the welding process, to calculate the distribution of welding residual stress field. On this basis, then AYSYS/LS-DYNA is used to simulate the laser shock processing on welding line. Simulation results show that residual stress distributions of weld region, heat-affected region and matrix by laser shock processing are clearly improved, and the tensile stress of weld region effectively reduce or eliminate. The simulation results and experimental results are generally consistent, it offer reasons for parameter optimization of welding and laser shock processing by finite element analysis software.

Sign in / Sign up

Export Citation Format

Share Document