Vibration Characteristic Analysis of the Barrel

2014 ◽  
Vol 1014 ◽  
pp. 143-146
Author(s):  
Shuai Chen ◽  
Cun Gui Yu
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Element Model ◽  
Vibration Characteristic ◽  
Analysis Software ◽  
Characteristic Analysis ◽  
Modal Shape ◽  
Element Analysis ◽  
Vibration Modal ◽  
The Finite Element Model

This study is based on the graduation design for undergraduate course. In the paper, finite element analysis software ANSYS had been used to create the finite element model of a cannon barrel. On this basis, the vibration modal analysis of the barrel was conducted. Through the model analysis, the natural frequency and modal shape of the cannon barrel was obtained. The situations of stiffness strength and elasticity deformation about each part of the barrel were got by analysis of the modal shape. By this way, we can verify the rationality of the barrel design .Also it can provide improvements of the weak place of the structure for people to improve the stiffness and shooting precision of the gun, in order to make the dynamics characteristics of the gun more reasonable.

Finite Element Analysis of the Greenhouse Canopy Effect with Seismic Load

2011 ◽  
Vol 368-373 ◽  
pp. 1125-1129
Author(s):  
Chang Jiang Liu ◽  
Jin Long Wang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Seismic Analysis ◽  
Element Model ◽  
Seismic Load ◽  
Analysis Software ◽  
Element Analysis ◽  
Canopy Effect ◽  
The Finite Element Analysis ◽  
The Finite Element Model

The finite element model about greenhouse canopy of seismic analysis was setted up, The finite element analysis software ANSYS was used to study structure displacement, stress analysis on greenhouse shed. The results showed that the dangerous part of the canopy were located on upper chord members,lower chord members, web members of the framework and the lower and upper, the inside of both sides of the wall with seismic load.Corresponding to this results ,the main destroied form were the framework damage caused by the bending deformation of upper chord members, lower chord members and the upper web members and the unstability caused by the distortion of both sides of the wall.

Finite Element Analysis of the Screen Box of the Combined Vibrating Screen Based on ANSYS

2011 ◽  
Vol 128-129 ◽  
pp. 1316-1320
Author(s):  
Nian Qin Guo ◽  
Wei Liu ◽  
Wei Ping Huang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Static Load ◽  
Natural Frequencies ◽  
Element Model ◽  
Characteristic Analysis ◽  
Element Analysis ◽  
Vibrating Screen ◽  
Stress And Deformation ◽  
The Finite Element Model

The finite element model of the combined vibrating screen was established by using ANSYS. Modal characteristic analysis and static analysis on the whole unit of screen box were done, and natural frequencies and modal shapes in the top 15 orders were obtained, distribution regularities of stress and deformation of each part of the screen box under the static load were revealed, providing the necessary basis for the improvement design and research on screen box.

Finite Element Analysis and Optimization of Long-Span Gantry NC Machining Center Structure

2011 ◽  
Vol 346 ◽  
pp. 379-384
Author(s):  
Shu Bo Xu ◽  
Yang Xi ◽  
Cai Nian Jing ◽  
Ke Ke Sun
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Design Method ◽  
Dynamic Performance ◽  
Plate Thickness ◽  
Element Model ◽  
Wall Structure ◽  
Characteristic Analysis ◽  
Element Analysis ◽  
Dynamic Performance Analysis

The use of finite element theory and modal analysis theory, the structure of the machine static and dynamic performance analysis and prediction using optimal design method for optimization, the new machine to improve job performance, improve processing accuracy, shorten the development cycle and enhance the competitiveness of products is very important. Selected for three-dimensional CAD modeling software-UG NX4.0 and finite element analysis software-ANSYS to set up the structure of the beam finite element model, and then post on the overall structure of the static and dynamic characteristic analysis, on the basis of optimized static and dynamic performance is more superior double wall structure of the beam. And by changing the wall thickness and the thickness of the inner wall, as well as the reinforcement plate thickness overall sensitivity analysis shows that changes in these three parameters on the dynamic characteristics of post impact. Application of topology optimization methods, determine the optimal structure of the beam ultimately.

Finite Element Analysis for the Crankshaft of the Piston Compressor

2010 ◽  
Vol 102-104 ◽  
pp. 17-21
Author(s):  
Bin Zhao
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Natural Frequencies ◽  
Piston Compressor ◽  
Element Model ◽  
Ansys Software ◽  
Element Analysis ◽  
Rotating Speed ◽  
Dynamical Characteristics ◽  
The Finite Element Model

In order to study the static and dynamical characteristics of the crankshaft, ANSYS software was used to carry out the corresponding calculations. The entity model of the crankshaft was established by UG software firstly, and then was imported into ANSYS software for meshing, and then the finite element model of the crankshaft was constructed. The crankshaft satisfied the requirement of stiffness and strength through static analysis. The top six natural frequencies and corresponding shapes were acquired through modal analysis, and the every order critical rotating speed of the crankshaft was calculated. The fatigue life of the crank was calculated by fatigue module of ANSYS software finally. These results offered the theoretical guidance for designing, manufacturing and repairing the crankshaft.

A Finite Element Analysis Study of Non-Linear Behavior in a Bolted Connection

1999 ◽  
Author(s):  
Richard B. Englund ◽  
David H. Johnson ◽  
Shannon K. Sweeney
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Sliding Friction ◽  
Element Model ◽  
Element Analysis ◽  
Bolted Connection ◽  
Fea Model ◽  
Linear Behavior ◽  
Radial Loading ◽  
The Finite Element Model

Abstract A finite element analysis (FEA) model of the interaction of a nut and bolt was used to investigate the effects of sliding, friction, and yielding in a bolted connection. The finite element model was developed as a two-dimensional, axisymmetric system, which allowed the study of axial and radial loading and displacements. This model did not permit evaluation of hoop or torsional effects such as tightening or the helical thread form. Results presented in this paper include the distribution of load between consecutive threads, the relative sliding along thread faces, and the stress distribution and regions of yielding in the model. Finally, a comparison to previous, linear analysis work and to published experimental data is made to conclude the paper.

Finite Element Analysis of Structural Strength of Concrete Mixing Truck’s Frame

2014 ◽  
Vol 945-949 ◽  
pp. 1143-1149
Author(s):  
Hai Xia Sun ◽  
Hua Kai Wei ◽  
Xiao Fang Zhao ◽  
Jia Rui Qi
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Finite Element Model ◽  
Structural Strength ◽  
Element Model ◽  
Basic Element ◽  
Operating Conditions ◽  
Frame Structure ◽  
Element Analysis ◽  
The Finite Element Model

The finite element model of the concrete mixing truck’s frame is builded by using shell as basic element, and the process of building the finite element model of the balance suspension is introduced in detail. Based on this, frame’s stress on five types of typical operating conditions are calculated by using the finite element analysis software, NASTRAN, and results can show the dangerous position and the maximum stress position on the frame. The analysis result on structural strength can provide the basis for further improving the frame structure.

The Finite-Element Analysis of Cylindrical Helical Tooth Milling Cutter Based on Marc

2011 ◽  
Vol 52-54 ◽  
pp. 1147-1152
Author(s):  
Guang Guo Zhang ◽  
Wei Jiang ◽  
Hong Hua Zhang ◽  
Huan Wang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Cutting Forces ◽  
Element Model ◽  
Local Deformation ◽  
Analysis Software ◽  
Element Analysis ◽  
Milling Cutter ◽  
Cutter Life ◽  
The Finite Element Analysis

In the traditional designs of milling cutter, we cannot get the required accuracy of machining as there may be local deformation on the edges, even more the cutter can break down. Aiming at this situation, a finite-element model of straight pin milling cutter with helical tooth are built using Marc, a nonlinear finite-element analysis software, the different cutting forces of the milling cutter during the cutting process are analyzed and the cutting forces of the milling cutter at different parameters are studied. We get the stress, the strain and the temperature distribution of the milling cutter in different situation. Our work offer a theoretical basis of improving stress of the cutter, designing the structure of cutters reasonably and analyzing the cutter failure as well as a new method of analysis and calculation of the cutter life and strength.

Finite Element Analysis and Topology Optimization of the Clamping Unit in a Two-Platen Injection Machine

2011 ◽  
Vol 117-119 ◽  
pp. 1535-1542 ◽  
Author(s):  
Hua Wei Zhang ◽  
Wei Xia ◽  
Zhi Heng Wu
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Topology Optimization ◽  
Element Model ◽  
Molding Machine ◽  
Element Analysis ◽  
And Topology ◽  
The Finite Element Analysis ◽  
Set Up ◽  
The Finite Element Model

In this paper, the clamping unit of a two-platen injection molding machine was modeled by Pro/ENGINEER, and was imported to Altair HyperWorks. In HyperMesh module, the finite element model was set up, ANSYS has been used in the finite element analysis of the clamping unit and the deformation and stress results were obtained. Based on the topology optimization of HyperWorks/OptiStruct, recommendations to improve the structure of the clamping mechanism are presented; the results showed that less material was used while its performance was maintained.

Finite Element Analysis of Frame of Dump Truck

2015 ◽  
Vol 733 ◽  
pp. 591-594
Author(s):  
Yong Zhen Zhu ◽  
Kuo Yang ◽  
Qi Yang ◽  
Yun De Zhao
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
3D Model ◽  
Element Model ◽  
Dump Truck ◽  
Stress Distributions ◽  
Improved Method ◽  
Element Analysis ◽  
Finite Element Software ◽  
The Finite Element Model

The CAD software was used to establish 3D model of frame of dump truck, and the finite element model was established through Hyper Mesh. The stress distributions of the frame in vertical accelerating, turning, twisting and climbing conditions were computed through finite element software when the dump truck was loaded 80t. The result is consistent with the actual situation of the frame, which proved that the approach of finite element analysis is feasible. And we proposed the improved method of the frame according to finite element results.

Theoretical and Finite Element Analysis of Crosshead of Quintuple Cylinders Fracturing Pump

2011 ◽  
Vol 201-203 ◽  
pp. 253-256 ◽  
Author(s):  
Zhi Peng Lv ◽  
Si Zhu Zhou ◽  
Xiu Hua Ma
Keyword(s):  
Boundary Condition ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Finite Element Model ◽  
Element Model ◽  
Maximum Force ◽  
Element Analysis ◽  
Plunger Pump ◽  
Load Handling ◽  
The Finite Element Model

According to the plunger pump movement principle, this paper analyzed the two kind of typical force situation of the crosshead, and obtained the theoretical maximum force. Established the finite element model of the crosshead, gave an analysis to the load handling and boundary condition. The last results of the node stress and displacement show that the crosshead can work safely.

Sign in / Sign up

Export Citation Format

Share Document