Numerical Simulation Study on Hydraulic Blasting Based on LS-DYNA

2012 ◽  
Vol 170-173 ◽  
pp. 3245-3249 ◽  
Author(s):  
Ya Bin Zhang ◽  
Chao Chen ◽  
Yun Peng Zhang
Keyword(s):  
Numerical Simulation ◽  
Shock Wave ◽  
Finite Element ◽  
Simulation Model ◽  
Simulation Study ◽  
Compression Wave ◽  
Static Pressure ◽  
Time Span ◽  
Pressure Function ◽  
Element Simulation

Adopting LS-DYNA finite element simulation, the simulation model of hydraulic blasting was established. Numerical simulation of hydraulic blasting was carried out. Through the simulation, the point that the structure wall was affected by four loading functions, which include the first shock wave, bottom reflex compression wave, the compression wave of opposite wall and the bubble pulse, was put forward. The four loading functions help to extend the time span of loading, and provide basis for principle of quasi static pressure function of hydraulic blasting.

Numerical Simulation of Tire Sliding Events Involving Impacts with Holes and Bumps

1986 ◽  
Vol 14 (2) ◽  
pp. 125-136 ◽  
Author(s):  
Y. Nakajima ◽  
J. Padovan
Keyword(s):  
Numerical Simulation ◽  
Finite Element ◽  
Finite Element Simulation ◽  
Full Range ◽  
Arbitrary Geometry ◽  
Operating Environments ◽  
Element Simulation ◽  
Simulation Scheme

Abstract This paper extends the finite element simulation scheme to handle the problem of tires undergoing sliding (skidding) impact into obstructions. Since the inertial characteristics are handled by the algorithm developed, the full range of operating environments can be accommodated. This includes the treatment of impacts with holes and bumps of arbitrary geometry.

Research on Surface Roughness of Supersonic Vibration Auxiliary Side Milling for Titanium Alloy

2021 ◽  
Author(s):  
XueTao Wei ◽  
caixue yue ◽  
DeSheng Hu ◽  
XianLi Liu ◽  
YunPeng Ding ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Finite Element ◽  
Prediction Model ◽  
Simulation Model ◽  
Finite Element Simulation ◽  
Simulation Software ◽  
Surface Roughness Prediction ◽  
Contour Shape ◽  
Element Simulation ◽  
Roughness Prediction

Abstract The processed surface contour shape is extracted with the finite element simulation software, and the difference value of contour shape change is used as the parameters of balancing surface roughness to construct the infinitesimal element cutting finite element model of supersonic vibration milling in cutting stability domain. The surface roughness trial scheme is designed in the central composite test design method to analyze the surface roughness test result in the response surface methodology. The surface roughness prediction model is established and optimized. Finally, the finite element simulation model and surface roughness prediction model are verified and analyzed through experiment. The research results show that, compared with the experiment results, the maximum error of finite element simulation model and surface roughness prediction model is 30.9% and12.3%, respectively. So, the model in this paper is accurate and will provide the theoretical basis for optimization study of auxiliary milling process of supersonic vibration.

Material Flow Estimation of Deep-Drawn Product by Using Finite-Element Simulation

2011 ◽  
Vol 301-303 ◽  
pp. 452-455 ◽  
Author(s):  
Yuji Kotani ◽  
Hisaki Watari ◽  
Akihiro Watanabe
Keyword(s):  
Numerical Simulation ◽  
Finite Element ◽  
Finite Element Simulation ◽  
Material Flow ◽  
Thickness Distribution ◽  
Sheet Thickness ◽  
Original Material ◽  
Element Simulation ◽  
Thickness Prediction ◽  
Simulation And Evaluation

The approach to total weight reduction has been a key issue for car manufacturers as they cope with more and more stringent requirements for fuel economy. In sheet metal forming, local increases in product-sheet thickness effectively contribute to reducing the total product weight. Products could be designed more efficiently if a designer could predict and control the thickness distribution of formed products. This paper describes a numerical simulation and evaluation of the material flow in local thickness increments of products formed by an ironing process. In order to clarify the mechanism of the local increase in sheet thickness, a 3-D numerical simulation of deep drawing and ironing was performed using finite-element simulation. The effects of various types of finite elements that primarily affect thickness changes in original materials and thickness prediction were investigated. It was found that the sheet-thickness distribution could be predicted if the original material was relatively thick and if an appropriate type of finite element is selected.

Finite Element Simulation of Vacuum Hot Bulge Forming of Titanium Alloy Cylindrical Workpiece

2011 ◽  
Vol 675-677 ◽  
pp. 921-924 ◽  
Author(s):  
Ming Wei Wang ◽  
Chun Yan Wang ◽  
Li Wen Zhang
Keyword(s):  
Numerical Simulation ◽  
Finite Element ◽  
Titanium Alloy ◽  
Finite Element Simulation ◽  
Process Parameters ◽  
Fe Model ◽  
Analysis Software ◽  
Forming Process ◽  
Element Simulation ◽  
Cylindrical Workpiece

Vacuum hot bulge forming (VHBF) is becoming an increasingly important manufacturing process for titanium alloy cylindrical workpiece in the aerospace industries. Finite element simulation is an essential tool for the specification of process parameters. In this paper, a two-dimensional nonlinear thermo-mechanical couple FE model was established. Numerical simulation of vacuum hot bulge forming of titanium alloy cylindrical workpiece was carried out using FE analysis software MSC.Marc. The effects of process parameter on vacuum hot bulge forming of BT20 titanium alloy cylindrical workpiece was analyzed by numerical simulation. The proposed an optimized vacuum hot bulge forming process parameters and die size. And the corresponding experiments were carried out. The simulated results agreed well with the experimental results.

Numerical Simulation and Parameter Optimization on Forming Process of Automobile Torque Box

2014 ◽  
Vol 722 ◽  
pp. 140-146
Author(s):  
Wen Juan Zhang ◽  
Long Wu ◽  
Gang Chen
Keyword(s):  
Numerical Simulation ◽  
Finite Element ◽  
Parameter Optimization ◽  
Process Parameters ◽  
Fem Simulation ◽  
Simulation Software ◽  
Drawing Process ◽  
Forming Process ◽  
Element Simulation

In this paper the drawing process of Box-torque was simulated by Dynaform, which is FEM simulation software. The process parameters, which affected the quality of forming, were optimized by finite element simulation. The emphasis was focus on the optimization of draw-bead and BHF and data were summarized from the optimization graphs. In this simulation, lengthways draw-bead was set on the technical face for reducing or eliminating wrinkle. It was innovation difference from the usual that the draw-bead was set on binder. Finally the correctness of simulation was approved by comparing the optimization of simulation with the data of experimentation.

Sign in / Sign up

Export Citation Format

Share Document