Design of Remote Pressure Monitoring System

2012 ◽  
Vol 229-231 ◽  
pp. 1454-1458
Author(s):  
Lin Chen ◽  
Ke Li ◽  
Xiao Wen Xie
Keyword(s):  
Data Collection ◽  
Real Time ◽  
Monitoring System ◽  
Strain Gauge ◽  
High Sensitivity ◽  
Pressure Data ◽  
Pressure Monitoring ◽  
Pressure Sensing ◽  
Sensing Data ◽  
Pressure Changes

Detection and measurement of pressure plays an important role on safety at different applications such as bridge, mine monitoring. The paper design and develop a remote pressure monitoring system (RPMS). The system is composed of three layers: pressure data sensing, data collection and pressure monitoring. Firstly, the pressure changes are measured by high sensitivity strain gauge and the signal is transferred, amplified and A/D converted; secondly, the pressure data is transmitted from different pressure sensing points to monitoring points; thirdly, after local stored, they are further sent to server center which can real-time monitoring all necessary sensing points. The prototype has also been implemented to verify the efficiency and effectivity of RPMS.

scholarly journals Design and Implementation of a Connection between Augmented Reality and Sensors

Robotics ◽  
2020 ◽  
Vol 9 (1) ◽  
pp. 3
Author(s):  
Marlon Aguero ◽  
Dilendra Maharjan ◽  
Maria del Pilar Rodriguez ◽  
David Dennis Lee Mascarenas ◽  
Fernando Moreu
Keyword(s):  
Augmented Reality ◽  
Data Collection ◽  
Real Time ◽  
Strain Gauge ◽  
Low Cost ◽  
Contextual Information ◽  
Wireless Sensor ◽  
Infrastructure Management ◽  
Data Collection And Analysis ◽  
The Way

Wireless sensor networks (WSN) are used by engineers to record the behavior of structures. The sensors provide data to be used by engineers to make informed choices and prioritize decisions concerning maintenance procedures, required repairs, and potential infrastructure replacements. However, reliable data collection in the field remains a challenge. The information obtained by the sensors in the field frequently needs further processing, either at the decision-making headquarters or in the office. Although WSN allows data collection and analysis, there is often a gap between WSN data analysis results and the way decisions are made in industry. The industry depends on inspectors’ decisions, so it is of vital necessity to improve the inspectors’ access in the field to data collected from sensors. This paper presents the results of an experiment that shows the way Augmented Reality (AR) may improve the availability of WSN data to inspectors. AR is a tool which overlays the known attributes of an object with the corresponding position on the headset screen. In this way, it allows the integration of reality with a virtual representation provided by a computer in real time. These additional synthetic overlays supply data that may be unavailable otherwise, but it may also display additional contextual information. The experiment reported in this paper involves the application of a smart Strain Gauge Platform, which automatically measures strain for different applications, using a wireless sensor. In this experiment, an AR headset was used to improve actionable data visualization. The results of the reported experiment indicate that since the AR headset makes it possible to visualize information collected from the sensors in a graphic form in real time, it enables automatic, effective, reliable, and instant communication from a smart low-cost sensor strain gauge to a database. Moreover, it allows inspectors to observe augmented data and compare it across time and space, which then leads to appropriate prioritization of infrastructure management decisions based on accurate observations.

Development of oxide thick film capacitors for a real time pressure monitoring system

2007 ◽  
Vol 27 (5-8) ◽  
pp. 1406-1410 ◽  
Author(s):  
K. Arshak ◽  
D. Morris ◽  
A. Arshak ◽  
O. Korostynska ◽  
K. Kaneswaran
Keyword(s):  
Real Time ◽  
Thick Film ◽  
Monitoring System ◽  
Time Pressure ◽  
Pressure Monitoring

On the Development of Precision Seeder Intelligent Monitoring System Controlled by Single-Chip Microcomputer

2014 ◽  
Vol 615 ◽  
pp. 130-134
Author(s):  
Qing Yong Yin
Keyword(s):  
Monitoring System ◽  
High Sensitivity ◽  
Wireless Transmission ◽  
Single Chip ◽  
Pressure Monitoring ◽  
Single Chip Microcomputer ◽  
Intelligent Monitoring ◽  
Initial Stage

The development of precision seeder is still in an initial stage in China. Most seeders are mechanical and semi-precision sowing, and intelligent monitoring and controlling systems also have great shortage. This paper discusses intelligent seeding monitoring, fertilizer box and seed box margin monitoring, and bellows pressure monitoring. The main feature of this system is that it adopts modularity, sensor with high-sensitivity and wireless transmission technology for convenient maintenance, which greatly improves the reliability of the system, and provides a feasible scheme for the development of precision seeder.

A Design of the Environment Monitoring System

2015 ◽  
Vol 730 ◽  
pp. 195-198
Author(s):  
Chun Yan Xie
Keyword(s):  
Data Collection ◽  
Environmental Monitoring ◽  
Real Time ◽  
Monitoring System ◽  
Remote Monitoring ◽  
Environment Monitoring ◽  
Long Distance ◽  
Distance Control ◽  
Environmental Monitoring System ◽  
Gsm Network

In order to improve the deficiency of environmental monitoring system in real-time, remote monitoring and other aspects, this paper designs an environmental monitoring system based on MCU and GSM network. It designs the struture diagram of the system and analyzes the procedure of data collection and transmission. This system achieves net control and long-distance control of the environmental monitoring.

scholarly journals Web based Real Time Water Pressure Monitoring System

2014 ◽  
Vol 1 (1) ◽  
Author(s):  
A. Ejah Umraeni Salam ◽  
Muh . ◽  
Tola . ◽  
Mary Selintung ◽  
Farouk Maricar
Keyword(s):  
Real Time ◽  
Monitoring System ◽  
Water Pressure ◽  
Pressure Monitoring ◽  
Web Based

Real-time pressure monitoring system for microfluidic devices using deformable colloidal crystal membrane

Lab on a Chip ◽  
2019 ◽  
Vol 19 (23) ◽  
pp. 3954-3961 ◽  
Author(s):  
Jang Han Choi ◽  
Tae Soup Shim
Keyword(s):  
Internal Pressure ◽  
Real Time ◽  
Monitoring System ◽  
Time Pressure ◽  
Colloidal Crystal ◽  
Microfluidic Devices ◽  
Pressure Monitoring

Real-time, in situ internal pressure monitoring in a microchannel is realized by a deformable colloidal crystal membrane.

scholarly journals Dynamic Interface Pressure Monitoring System for the Morphological Pressure Mapping of Intermittent Pneumatic Compression Therapy

Sensors ◽  
2019 ◽  
Vol 19 (13) ◽  
pp. 2881 ◽  
Author(s):  
Shumi Zhao ◽  
Rong Liu ◽  
Chengwei Fei ◽  
Dong Guan
Keyword(s):  
Real Time ◽  
Monitoring System ◽  
Compression Therapy ◽  
Intermittent Pneumatic Compression ◽  
Interface Pressure ◽  
Pressure Monitoring ◽  
Vein Thrombosis ◽  
Pressure Mapping ◽  
Dynamic Interface ◽  
Study Results

Intermittent pneumatic compression (IPC) is a proactive compression therapeutic technique in the prophylaxis of deep vein thrombosis, reduction of limb edema, and treatment of chronic venous ulcers. To appropriately detect and analyze biomechanical pressure profiles delivered by IPC in treatment, a dynamic interface pressure monitoring system was developed to visualize and quantify morphological pressure mapping in the spatial and temporal domains in real time. The system comprises matrix soft sensors, a smart IPC device, a monitoring and analysis software, and a display unit. The developed soft sensor fabricated by an advanced screen printing technology was used to detect intermitted pressure by an IPC device. The pneumatic pressure signals inside the bladders of the IPC were also transiently collected by a data acquisition system and then transmitted to the computer through Bluetooth. The experimental results reveal that the developed pressure monitoring system can perform the real-time detection of dynamic pressures by IPC and display the morphological pressure mapping multi-dimensionally. This new system provides a novel modality to assist in the effective evaluation of proactive compression therapy in practice. The study results contribute to understanding the working mechanisms of IPC and improving its functional design based on intuitive biomechanical characteristics of compression delivery profiles.

scholarly journals Edge Computing Approach for Vessel Monitoring System

Energies ◽  
2019 ◽  
Vol 12 (16) ◽  
pp. 3087 ◽  
Author(s):  
Joao C. Ferreira ◽  
Ana Lucia Martins
Keyword(s):  
Data Collection ◽  
Real Time ◽  
Monitoring System ◽  
Communication Systems ◽  
Satellite Communications ◽  
Edge Computing ◽  
Abnormal Behavior ◽  
Collection Process ◽  
Data Collection Process ◽  
Computing Approach

A vessel monitoring system (VMS) is responsible for real-time vessel movement tracking. At sea, most of the tracking systems use satellite communications, which have high associated costs. This leads to a less frequent transmission of data, which reduces the reliability of the vessel location. Our research work involves the creation of an edge computing approach on a local VMS, creating an intelligent process that decides whether the collected data needs to be transmitted or not. Only relevant data that can indicate abnormal behavior is transmitted. The remaining data is stored and transmitted only at ports when communication systems are available at lower prices. In this research, we apply this approach to a fishing control process increasing the data collection process from once every 10 min to once every 30 s, simultaneously decreasing the satellite communication costs, as only relevant data is transmitted in real-time to the competent central authorities. Findings show substantial communication savings from 70% to 90% as only abnormal vessel behavior is transmitted. Even with a data collection process of once every 30 s, findings also show that the use of more stable fishing techniques and fishing areas result in higher savings. The proposed approach is assessed as well in terms of the environmental impact of fishing and potential fraud detection and reduction.

Sign in / Sign up

Export Citation Format

Share Document