The Analysis of Ceramic Cutting Tools Durability in Machining Process of Steel C60 Applied According to Standard ISO 3685

2013 ◽  
Vol 275-277 ◽  
pp. 2190-2194 ◽  
Author(s):  
Anton Panda ◽  
Ján Duplák ◽  
Jozef Jurko ◽  
Marcel Behún ◽  
Marek Jančík
Keyword(s):  
Cutting Tool ◽  
Cutting Tools ◽  
Machining Process ◽  
Technological Operation ◽  
Technical Science ◽  
Cutting Ceramic ◽  
Comprehensive Information ◽  
Tool Durability

Very important cutting tool property is its durability. Durability of cutting tool defines lifetime of this cutting tool and it determines its suitability for select technological operation. Technical science defines a lot of different factors, that they may be cause of shorter cutting tool lifetime. For increase cutting tool durability is necessary maximally possible elimination of these factors. Determination of cutting tool durability is very important, because provides comprehensive information how to determine appropriate technological conditions for selected cutting tool. In engineering is for determination of cutting tools durability used T-vc dependence. The article describes process how to create durability dependence for cutting tools made of cutting ceramic by means of T-vc dependence in machining process of C60.

Comprehensive Durability Identification of Ceramic Cutting Materials in Machining Process of Steel 80MoCrV4016

2015 ◽  
Vol 669 ◽  
pp. 286-293 ◽  
Author(s):  
Anton Panda ◽  
Ján Duplák ◽  
Miroslav Kormoš ◽  
Juraj Ružbarský
Keyword(s):  
Cutting Tool ◽  
Cutting Tools ◽  
Machining Process ◽  
Technological Operation ◽  
Technical Science ◽  
Cutting Ceramic ◽  
Comprehensive Information ◽  
Cutting Speeds ◽  
Tool Durability

Specification cutting tools durability made of cutting ceramic in machining process of steel 80MoCrV4016 is very important for economics of small and medium-sized enterprises, because cutting tool durability is factor that significantly affects the budget of these enterprises. This problematic is determined for small and medium-sized manufacturers of bearings, because steel 80MoCrV4016 is most commonly used for production of bearings. Durability of cutting tool defines lifetime of this cutting tool and it determines its suitability for select technological operation. Especially for cutting ceramic is necessary to define durability dependence on available set of cutting speeds and to determine lifetime of tools made of cutting ceramic. Technical science defines a lot of different factors, that they may be cause of shorter cutting tool lifetime. For increase cutting tool durability is necessary maximally possible elimination of these factors. Determination of cutting tool durability is very important, because provides comprehensive information how to determine appropriate technological conditions for selected cutting tool. In engineering is for determination of cutting tools durability usedT-vcdependence. The article describes process how to create durability dependence for cutting tools made of cutting ceramic by means ofT-vcdependence in machining process of steel 80MoCrV4016.

Comprehensive Identification of Sintered Carbide Durability in Machining Process of Bearings Steel 100CrMn6

2011 ◽  
Vol 340 ◽  
pp. 30-33 ◽  
Author(s):  
Anton Panda ◽  
Ján Duplák ◽  
Jozef Jurko ◽  
Marcel Behún
Keyword(s):  
Cutting Tool ◽  
Cutting Tools ◽  
Machining Process ◽  
Technological Operation ◽  
Technical Science ◽  
Sintered Carbide ◽  
Comprehensive Information ◽  
Tool Durability

Very important cutting tool property is its durability. Durability of cutting tool defines lifetime of this cutting tool and it determines its suitability for select technological operation. Technical science defines a lot of different factors, that they may be cause of shorter cutting tool lifetime. For increase cutting tool durability is necessary maximally possible elimination of these factors. Determination of cutting tool durability is very important, because provides comprehensive information how to determine appropriate technological conditions for selected cutting tool. In engineering is for determination of cutting tools durability used T-vc dependence. The article describes process how to create durability dependence for cutting tools made of sintered carbide by means of T-vc dependence in machining process of steel 100CrMn6.

Tapered Roller Bearing and Comprehensive Durability Identification of Ceramic Cutting Materials in Machining Process of Steel 80MoCrV4016

2013 ◽  
Vol 415 ◽  
pp. 606-609
Author(s):  
Anton Panda ◽  
Ján Duplák ◽  
Jozef Jurko
Keyword(s):  
Cutting Tool ◽  
Cutting Tools ◽  
Roller Bearing ◽  
Machining Process ◽  
Technical Science ◽  
Tapered Roller Bearing ◽  
Cutting Ceramic ◽  
Tapered Roller ◽  
Tool Durability

Specification cutting tools durability made of cutting ceramic in machining process of steel 80MoCrV4016 is very important for economics of small and medium-sized enterprises, because cutting tool durability is factor that significantly affects the budget of these enterprises. This problematic is determined for small and medium-sized manufacturers of bearings, because steel 80MoCrV4016 is most commonly used for production of bearings. Durability of cutting tool defines lifetime of this cutting tool and it determines its suitability for select technological operation. Especially for cutting ceramic is necessary to define durability dependence on available set of cutting speeds and to determine lifetime of tools made of cutting ceramic. Technical science defines a lot of different factors, that they may be cause of shorter cutting tool lifetime. For increase cutting tool durability is necessary maximally possible elimination of these factors. Determination of cutting tool durability is very important, because provides comprehensive information how to determine appropriate technological conditions for selected cutting tool. In engineering is for determination of cutting tools durability used T-vc dependence. The article describes process how to create durability dependence for cutting tools made of cutting ceramic by means of T-vc dependence in machining process of steel 80MoCrV4016.

Comprehensive Identification of Durability for Selected Cutting Tool Applied on the Base of Taylor Dependence

2013 ◽  
Vol 716 ◽  
pp. 254-260 ◽  
Author(s):  
Anton Panda ◽  
Ján Duplák ◽  
Karol Vasilko
Keyword(s):  
Cutting Tool ◽  
Cutting Tools ◽  
Cutting Speed ◽  
Machining Process ◽  
Technical Science ◽  
Technical Practice ◽  
Comprehensive Information ◽  
Basic Parameters ◽  
Tool Durability

Technical practice uses a lot of cutting tools made of different materials. According to selecting workpiece have to be defined technological conditions. For all selected technological conditions is important prescribe parameters for machining. The basic parameters for every cutting process are cutting speed, feed and cutting depth. These technological conditions are defined by means of calculation or by means of mechanical engineering tables. Specification of tool wear by means of calculation is very difficult. Very important cutting tool property is its durability. Durability of cutting tool defines lifetime of this cutting tool and it determines its suitability for select technological operation. Technical science defines a lot of different factors, that they may be cause of shorter cutting tool lifetime. For increase cutting tool durability is necessary maximally possible elimination of these factors. Determination of cutting tool durability is very important, because provides comprehensive information how to determine appropriate technological conditions for selected cutting tool. In engineering is for determination of cutting tools durability used T-vc dependence. The article describes process how to create the durability dependence for cutting tool made of cutting ceramic (Al2O3) by means of T-vc dependence in machining process of C45.

Durability Analysis for Selected Cutting Tools in Machining Process of Steel 16MoV6-3

2013 ◽  
Vol 308 ◽  
pp. 133-139 ◽  
Author(s):  
Ján Duplák ◽  
Michal Hatala ◽  
Peter Michalik
Keyword(s):  
High Speed ◽  
Cutting Tool ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Machining Process ◽  
Technical Science ◽  
Sintered Carbide ◽  
Durability Analysis ◽  
Tool Durability

Durability of cutting tool defines lifetime of this cutting tool and it determines its suitability for select technological operation. Technical science defines a lot of different factors, that they may be cause of shorter cutting tool lifetime. For increase cutting tool durability is necessary maximally possible elimination of these factors. Determination of cutting tool durability is very important, because provides comprehensive information how to determine appropriate technological conditions for selected cutting tool. In engineering is for determination of cutting tools durability used T-vc dependence. Durability of cutting tools is defined in standard ISO 3685. In standard ISO 3685 is defined T-vc dependence for different cutting materials and standard included process evaluation of tool durability for cutting materials made of high speed steel, sintered carbide and cutting ceramic. Specification of cutting tools durability in machining process of steel 16MoV6-3 is very important for economics of small and medium-sized enterprises, because cutting tool durability is factor that significantly affects the budget of these enterprises. Standard ISO 3685 contains instructions how to create T-vc dependence for cutting tools. In this standard are only instructions how to create T-vc dependence according to Mr. Taylor. The article describes process how to create durability dependence for cutting tools made of sintered carbide in machining process of 16MoV6-3 by means of T-vc dependence.

Roller Bearings and Analytical Expression of Selected Cutting Tools Durability in Machining Process of Steel 80MoCrV4016

2013 ◽  
Vol 415 ◽  
pp. 610-613 ◽  
Author(s):  
Anton Panda ◽  
Ján Duplák ◽  
Jozef Jurko ◽  
Iveta Pandová
Keyword(s):  
High Speed ◽  
Cutting Tool ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Machining Process ◽  
Engineering Practice ◽  
Technical Science ◽  
Analytical Expression ◽  
Comprehensive Information ◽  
Tool Durability

Technical science defines a lot of different factors, that they may be cause of shorter cutting tool lifetime. For increase of cutting tool durability is necessary maximally possible elimination of these factors. Determination of cutting tool durability is very important, because provides comprehensive information how to determine appropriate technological conditions for selected cutting tool. The analytical expression of dependence represents very important part of experiments, because all tested processes can be described and defined by formula. These instructions, how to proceed in experiments are obtained in standard ISO 3685. Very important and often used standard ISO in engineering practice is standard ISO 3685. The main part of this standard is T-vc dependence for cutting materials. In standard ISO 3685 are included cutting materials made of high speed steel, sintered carbide and cutting ceramic. The article describes process how to define and to analytically express T-vc dependence for cutting tools made of ceramic in machining process of steel 80MoCrV4016.

The Comparison of Durability Ceramic Cutting Tools in Turning Process of Steel 80MoCrV4016

2014 ◽  
Vol 718 ◽  
pp. 110-115
Author(s):  
Michal Hatala ◽  
Ján Duplák ◽  
Marek Kočiško ◽  
Miroslav Kormoš ◽  
Miroslav Mičko ◽  
...  
Keyword(s):  
Main Part ◽  
Cutting Tool ◽  
Cutting Tools ◽  
Machining Process ◽  
Engineering Practice ◽  
Technological Operation ◽  
Turning Process ◽  
Cutting Ceramic ◽  
Tool Durability ◽  
Inputs And Outputs

Every experiment has inputs and outputs. Inputs are defined before experiment and they are accurately determined and described. Outputs have to be measured and described after experiment. It is very difficult to describe and express parameters that are base of experiments. Tested parameters and theirs dependencies are very often described by means of graphs, tables or definitions. Lot of parameters and their dependencies in engineering practice are not described by means of formula. Very important and often used standard ISO in engineering practice is standard ISO 3685. This standard includes characteristics for various cutting materials. The main part of this standard is T-vc dependence for cutting materials. One of the cutting materials contained in standard ISO 3685 is cutting ceramic. There are instructions obtained in standard ISO 3685 for creation of T-vc dependence. Specification cutting tools durability made of cutting ceramic in machining process of steel 80MoCrV4016 is very important for economics of small and medium-sized enterprises, because cutting tool durability is factor that significantly affects the budget of these enterprises. This problematic is determined for small and medium-sized manufacturers of bearings, because steel 80MoCrV4016 is most commonly used for production of bearings. Durability of cutting tool defines lifetime of this cutting tool and it determines its suitability for select technological operation. The article describes process how to create durability dependence for cutting tools made of cutting ceramic by means of T-vc dependence in machining process of steel 80MoCrV4016.

Analysis of Selected Properties of Cutting Ceramics at Machining Process of Bearing Steel 100Cr6

2014 ◽  
Vol 616 ◽  
pp. 308-316 ◽  
Author(s):  
Anton Panda ◽  
Ján Duplák ◽  
Marek Prislupčák ◽  
Pavol Kokuľa
Keyword(s):  
High Speed ◽  
Cutting Tool ◽  
Cutting Tools ◽  
High Speed Steel ◽  
Bearing Steel ◽  
Machining Process ◽  
Cutting Ceramic ◽  
Cutting Ceramics ◽  
Bearing Rings ◽  
Tool Durability

Cutting tool durability is very important cutting tool property. Especially for cutting ceramic is necessary to define durability dependence on available set of cutting speeds and to determine lifetime of tools made of cutting ceramic. Durability of cutting tools is defined in standard ISO 3685. In standard ISO 3685 is defined T-vc dependence for different cutting materials and standard included process evaluation of tool durability for cutting materials made of high speed steel, sintered carbide and cutting ceramic. Specification cutting tools durability made of cutting ceramic in machining process of steel 100Cr6 is very important for economics of small and medium-sized enterprises, because cutting tool durability is factor that significantly affects the budget of these enterprises. This problematic is determined for small and medium-sized manufacturers of bearings, because steel 100Cr6 is most commonly used for production of bearing rings 100 mm in diameter. This material is usable for actuator (actuators and reduction gears) too. Description of cutting ceramic durability could mean for bearings manufacturer determination of optimal cutting parameter with maximum possible use of tool lifetime. Standard ISO 3685 contains instructions how to create T-vc dependence for cutting tools made of cutting ceramic. In this standard are only instructions how to create T-vc dependence according to Taylor. The article compares T-vc dependencies for various cutting ceramics (Al2O3, Al2O3+ZrO2, Al2O3+TiCN) with T-vc dependence defined in standard ISO 3685, because this standard describes T-vc dependence for all entered cutting materials together.

Analytical Expression of T-vC Dependence in Standard ISO 3685 for Cutting Ceramic

2011 ◽  
Vol 480-481 ◽  
pp. 317-322 ◽  
Author(s):  
Anton Panda ◽  
Ján Duplák ◽  
Jozef Jurko
Keyword(s):  
Main Part ◽  
Cutting Tool ◽  
Cutting Tools ◽  
Life Time ◽  
Technical Science ◽  
Analytical Expression ◽  
Cutting Ceramic

Durability is very important property of every cutting material. This property of cutting materials defined theirs life-time. Technical science defines a lot of different factors, that they may be cause of shorter life-time of cutting tool. Maximally possible elimination of these factors is necessary for optimization of cutting materials life-time. Durability of cutting materials is defined in standard ISO 3685. The main part of standard ISO 3685 is T-vc dependence definition for selected cutting materials. One of these cuting materials contained in this standard is cutting ceramic. Standard ISO 3685 contains instructions how to create T-vc dependence for cutting tools made of cutting ceramic. In this standard are only instructions how to create T-vc dependence according to Taylor, but last part of every experiment is analytical expression of tested dependence. The article describes process how to define and analytically express T-vc dependence for cutting ceramic (Al2O3).

Bearing Rings Turning and the Impact of this Process for Resulting Durability of Selected Cutting Materials Durability

2015 ◽  
Vol 669 ◽  
pp. 278-285
Author(s):  
Anton Panda ◽  
Ján Duplák ◽  
Miroslav Kormoš ◽  
Slavko Jurko
Keyword(s):  
High Speed ◽  
Cutting Tool ◽  
Cutting Tools ◽  
Cutting Speed ◽  
High Speed Steel ◽  
Price Cutting ◽  
Cutting Ceramic ◽  
Bearing Rings ◽  
The Impact ◽  
Tool Durability

Essential factors of each new discovery or piece of knowledge in science are predetermined, prepared and realized experiment. Every successfully realized experiment with obtained outputs and measurements indicates the gauge of asset that has been achieved by its execution. After analyzing of outputs final dependencies can be described that generalize whole experiment and allow entire process to be analytically identified. The production of bearings is very difficult process. Especially production of bearing rings is very complicated. Optimization of this process means significant savings for the company. Bearing rings are produced by turning. One of the most important parts of the turning process is cutting tool. On the base of cutting tools are determined many factors for example: quality, price, cutting speed, etc. All these factors of cutting tools are the only consequence of these cutting tools durability. Cutting tool durability determines its cutting properties and machinable ability. Specification of tool wear by means of calculation is very difficult. Durability of cutting tools is defined in standard ISO 3685. In standard ISO 3685 is definedT-vcdependence for different cutting materials and standard included process evaluation of tool durability for cutting materials made of high speed steel, sintered carbide and cutting ceramic. The article describes evaluation ofT-vcdependence on the selected type of cutting materials and theirs comparison with measured values T-vc dependence that are defined in standard ISO 3685.

Sign in / Sign up

Export Citation Format

Share Document