The Effect of Radiation on Oxy-Fuel Combustion Characteristics in Microchannels

2013 ◽  
Vol 302 ◽  
pp. 49-54
Author(s):  
Rached Ben-Mansour ◽  
Mohamed A. Habib ◽  
Pervez Ahmed
Keyword(s):  
Heat Transfer ◽  
Diffusion Flames ◽  
Radiation Heat Transfer ◽  
Fuel Combustion ◽  
Combustion Characteristics ◽  
Discrete Ordinates ◽  
Small Scale ◽  
Transfer Model ◽  
Radiation Heat ◽  
Radiation Model

The importance of thermal radiation in heat transfer mechanism in many micro combustion systems has been well identified in the past few years. There is currently lack of quantitative understanding on the radiation heat transfer in relatively small scale laminar diffusion flames in microchannels. In the present study a two dimensional model is considered to investigate the effects of radiation on oxy-fuel combustion characteristics in microchannels. The discrete-ordinates radiation model is used for the study. It is observed that excluding radiation model results in the over-prediction of combustion temperatures in the micro-reactor. It has also been observed that the overall reaction rate and its peak value increase when accounting for radiative heat transfer, despite the decrease in temperature caused by radiation. Therefore, it is important to incorporate a radiation heat transfer model in combustion micro-systems in order to predict their characteristics accurately.

Radiation Heat Transfer in Fluidized Beds: A Comparison of Exact and Simplified Approaches

1994 ◽  
Vol 116 (3) ◽  
pp. 652-659 ◽  
Author(s):  
G. Flamant ◽  
J. D. Lu ◽  
B. Variot
Keyword(s):  
Heat Transfer ◽  
Fluidized Beds ◽  
Radiation Heat Transfer ◽  
Discrete Ordinates ◽  
Transfer Model ◽  
Radiation Heat ◽  
Flux Divergence ◽  
Transfer Coefficients ◽  
Variable Porosity ◽  
Radiation Exchange

Radiation heat transfer at heat exchanger walls in fluidized beds has never been examined through a complete formulation of the problem. In this paper a wall-to-bed heat transfer model is proposed to account for particle convection, gas convection, and radiation exchange in a variable porosity medium. Momentum, energy, and intensity equations are solved in order to determine the velocity, temperature, radiative heat flux profiles and heat transfer coefficients. The discrete-ordinates method is used to compute the radiative intensity equation and the radiative flux divergence in the energy equation. Both the gray and the non-gray assumptions are considered, as well as dependent and independent scattering. The exact solution obtained is compared with several simplified approaches. Large differences are shown for small particles at high temperature but the simplified solutions are valid for large particle beds. The dependency of radiative contribution on controlling parameters is discussed.

Combined Conduction and Radiation Heat Transfer in Porous Materials Heated by Intense Solar Radiation

1985 ◽  
Vol 107 (1) ◽  
pp. 29-34 ◽  
Author(s):  
L. K. Matthews ◽  
R. Viskanta ◽  
F. P. Incropera
Keyword(s):  
Heat Transfer ◽  
Radiation Heat Transfer ◽  
Plane Layer ◽  
Single Scattering ◽  
Dominant Mode ◽  
Radiative Properties ◽  
Maximum Temperature ◽  
Transfer Model ◽  
Radiation Heat ◽  
Flux Approximation

An analysis is presented to predict the heat transfer characteristics of a plane layer of a semitransparent, high-temperature, porous material which is irradiated by an intense solar flux. A transient, combined conduction and radiation heat transfer model, which is based on a two-flux approximation for the radiation, is used to predict the temperature distribution and heat transfer in the material. Numerical results have been obtained using thermophysical and radiative properties of zirconia as a typical material. The results show that radiation is an important mode of heat transfer, even when the opacity of the material is large (τL > 100). Radiation is the dominant mode of heat transfer in the front third of the material and comparable to conduction toward the back. The semitransparency and high single scattering albedo of the zirconia combine to produce a maximum temperature in the interior of the material.

scholarly journals Radiation heat transfer model using Monte Carlo ray tracing method on hierarchical ortho-Cartesian meshes and non-uniform rational basis spline surfaces for description of boundaries

2014 ◽  
Vol 35 (2) ◽  
pp. 65-92 ◽  
Author(s):  
Paweł Kuczyński ◽  
Ryszard Białecki
Keyword(s):  
Heat Transfer ◽  
Ray Tracing ◽  
Radiation Heat Transfer ◽  
Transfer Model ◽  
Rational Basis ◽  
Radiation Heat ◽  
Cartesian Meshes ◽  
Spline Surfaces ◽  
Nurbs Surfaces ◽  
Transfer Problems

Abstract The paper deals with a solution of radiation heat transfer problems in enclosures filled with nonparticipating medium using ray tracing on hierarchical ortho-Cartesian meshes. The idea behind the approach is that radiative heat transfer problems can be solved on much coarser grids than their counterparts from computational fluid dynamics (CFD). The resulting code is designed as an add-on to OpenFOAM, an open-source CFD program. Ortho-Cartesian mesh involving boundary elements is created based upon CFD mesh. Parametric non-uniform rational basis spline (NURBS) surfaces are used to define boundaries of the enclosure, allowing for dealing with domains of complex shapes. Algorithm for determining random, uniformly distributed locations of rays leaving NURBS surfaces is described. The paper presents results of test cases assuming gray diffusive walls. In the current version of the model the radiation is not absorbed within gases. However, the ultimate aim of the work is to upgrade the functionality of the model, to problems in absorbing, emitting and scattering medium projecting iteratively the results of radiative analysis on CFD mesh and CFD solution on radiative mesh.

Discrete Ordinates Method for Transient Radiation Transfer in Cylindrical Enclosures

2003 ◽  
Author(s):  
Kyunghan Kim ◽  
Zhixiong Guo
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Radiative Heat ◽  
Radiation Transfer ◽  
Radiation Heat Transfer ◽  
Discrete Ordinates ◽  
Radiation Heat ◽  
Discrete Ordinates Method ◽  
Transient Radiation ◽  
Tissue Welding

The Discrete Ordinates Method (DOM) for solving transient radiation transfer equation in cylindrical coordinates is developed for radiation heat transfer in participating turbid media in pico-scale time domain. The application problems addressed here are laser tissue welding and soldering. The novelty of this study lies with the use of ultrashort laser pulses as the irradiation source. The characteristics of transient radiation heat transfer in ultrafast laser tissue welding and soldering are studied with the DOM developed. The temporal distribution of radiative energy inside the tissue cylinder as well as the radiative heat flux on the tissue surface is obtained. Comparisons are performed between laser welding without use of solder and laser soldering with use of solder. The use of solder is found to have highly concentrated radiation energy deposition in the solder-stained region and reduce the surface radiative heat flux accordingly. Comparisons of transient radiation heat transfer between the spatially square-variance and Gaussian-variance laser inputs and between the temporally Gaussian and skewed input profiles are also conducted.

Sign in / Sign up

Export Citation Format

Share Document