Acoustic Signals Analysis Based on Empirical Mode Decomposition and Spectrum Analysis Technique

2010 ◽  
Vol 40-41 ◽  
pp. 91-95 ◽  
Author(s):  
Yan Li Zhang
Keyword(s):  
Empirical Mode Decomposition ◽  
High Frequency ◽  
Acoustic Signals ◽  
Intrinsic Mode Functions ◽  
Mode Decomposition ◽  
Analysis Technique ◽  
Marginal Spectrum ◽  
Rock Interface ◽  
Coal Rock ◽  
Instantaneous Energy

A method to analyze the acoustic signals collected in fully-mechanized caving face is presented in this paper. Through analyzing the marginal spectrum and frequency spectrum of intrinsic mode functions obtained by empirical mode decomposition, acoustic signals’ frequency and amplitude characteristics are gotten, that is, high frequency signals about 1000Hz ~2800Hz are produced when the top coal is combined with gangue. Furthermore, the acoustic signals’ instantaneous energy spectrums in the frequency range of 1000Hz ~2800Hz can be used to identify the coal-rock interface.

scholarly journals Texture Feature Extraction Method for Ground Nephogram Based on Hilbert Spectrum of Bidimensional Empirical Mode Decomposition

2014 ◽  
Vol 31 (9) ◽  
pp. 1982-1994 ◽  
Author(s):  
Xiaoying Chen ◽  
Aiguo Song ◽  
Jianqing Li ◽  
Yimin Zhu ◽  
Xuejin Sun ◽  
...  
Keyword(s):  
Empirical Mode Decomposition ◽  
Recognition Rate ◽  
Texture Feature ◽  
Intrinsic Mode Functions ◽  
Hilbert Spectrum ◽  
Feature Extraction Method ◽  
Hilbert Huang Transform ◽  
Mode Decomposition ◽  
Marginal Spectrum ◽  
Bidimensional Empirical Mode Decomposition

Abstract It is important to recognize the type of cloud for automatic observation by ground nephoscope. Although cloud shapes are protean, cloud textures are relatively stable and contain rich information. In this paper, a novel method is presented to extract the nephogram feature from the Hilbert spectrum of cloud images using bidimensional empirical mode decomposition (BEMD). Cloud images are first decomposed into several intrinsic mode functions (IMFs) of textural features through BEMD. The IMFs are converted from two- to one-dimensional format, and then the Hilbert–Huang transform is performed to obtain the Hilbert spectrum and the Hilbert marginal spectrum. It is shown that the Hilbert spectrum and the Hilbert marginal spectrum of different types of cloud textural images can be divided into three different frequency bands. A recognition rate of 87.5%–96.97% is achieved through random cloud image testing using this algorithm, indicating the efficiency of the proposed method for cloud nephogram.

Random Noise Reduction Based on Ensemble Empirical Mode Decomposition and Wavelet Threshold Filtering

2012 ◽  
Vol 518-523 ◽  
pp. 3887-3890 ◽  
Author(s):  
Wei Chen ◽  
Shang Xu Wang ◽  
Xiao Yu Chuai ◽  
Zhen Zhang
Keyword(s):  
Noise Reduction ◽  
Empirical Mode Decomposition ◽  
High Frequency ◽  
Reduction Method ◽  
Random Noise ◽  
Low Frequency ◽  
Ensemble Empirical Mode Decomposition ◽  
Intrinsic Mode Functions ◽  
Mode Decomposition ◽  
Eemd Method

This paper presents a random noise reduction method based on ensemble empirical mode decomposition (EEMD) and wavelet threshold filtering. Firstly, we have conducted spectrum analysis and analyzed the frequency band range of effective signals and noise. Secondly, we make use of EEMD method on seismic signals to obtain intrinsic mode functions (IMFs) of each trace. Then, wavelet threshold noise reduction method is used on the high frequency IMFs of each trace to obtain new high frequency IMFs. Finally, reconstruct the desired signal by adding the new high frequency IMFs on the low frequency IMFs and the trend item together. When applying our method on synthetic seismic record and field data we can get good results.

scholarly journals Noise Reduction Method of Underwater Acoustic Signals Based on Uniform Phase Empirical Mode Decomposition, Amplitude-Aware Permutation Entropy, and Pearson Correlation Coefficient

Entropy ◽  
2018 ◽  
Vol 20 (12) ◽  
pp. 918 ◽  
Author(s):  
Guohui Li ◽  
Zhichao Yang ◽  
Hong Yang
Keyword(s):  
Noise Reduction ◽  
Empirical Mode Decomposition ◽  
High Frequency ◽  
Reduction Method ◽  
Pearson Correlation ◽  
Low Frequency ◽  
Acoustic Signals ◽  
Permutation Entropy ◽  
Underwater Acoustic ◽  
Mode Decomposition

Noise reduction of underwater acoustic signals is of great significance in the fields of military and ocean exploration. Based on the adaptive decomposition characteristic of uniform phase empirical mode decomposition (UPEMD), a noise reduction method for underwater acoustic signals is proposed, which combines amplitude-aware permutation entropy (AAPE) and Pearson correlation coefficient (PCC). UPEMD is a recently proposed improved empirical mode decomposition (EMD) algorithm that alleviates the mode splitting and residual noise effects of EMD. AAPE is a tool to quantify the information content of nonlinear time series. Unlike permutation entropy (PE), AAPE can reflect the amplitude information on time series. Firstly, the original signal is decomposed into a series of intrinsic mode functions (IMFs) by UPEMD. The AAPE of each IMF is calculated. The modes are separated into high-frequency IMFs and low-frequency IMFs, and all low-frequency IMFs are determined as useful IMFs (UIMFs). Then, the PCC between the high-frequency IMF with the smallest AAPE and the original signal is calculated. If PCC is greater than the threshold, the IMF is also determined as a UIMF. Finally, all UIMFs are reconstructed and the denoised signal is obtained. Chaotic signals with different signal-to-noise ratios (SNRs) are used for denoising experiments. Compared with EMD and extreme-point symmetric mode decomposition (ESMD), the proposed method has higher SNR and smaller root mean square error (RMSE). The proposed method is applied to noise reduction of real underwater acoustic signals. The results show that the method can further eliminate noise and the chaotic attractors are smoother and clearer.

ASSESSING DISCONTINUOUS DATA USING ENSEMBLE EMPIRICAL MODE DECOMPOSITION

2011 ◽  
Vol 03 (04) ◽  
pp. 483-491 ◽  
Author(s):  
BRADLEY LEE BARNHART ◽  
HONDA KAHINDO WA NANDAGE ◽  
WILLIAM EICHINGER
Keyword(s):  
Empirical Mode Decomposition ◽  
High Frequency ◽  
Low Frequency ◽  
Ensemble Empirical Mode Decomposition ◽  
Data Sets ◽  
Intrinsic Mode Functions ◽  
Mode Decomposition ◽  
Data Gaps ◽  
Discontinuous Data ◽  
Periodic Components

This investigation presents an improved ensemble empirical mode decomposition (EEMD) algorithm that can be applied to discontinuous data. The quality of the algorithm is assessed by creating artificial data gaps in continuous data, then comparing the extracted intrinsic mode functions (IMFs) from both data sets. The results show that errors increase as the gap length increases. In addition, errors in the high-frequency IMFs are less than the low-frequency IMFs. The majority of the errors in the high-frequency IMFs are due to end-effect errors associated with under-defined interpolation functions near the gap endpoints. A method that utilizes a mirroring technique is presented to reduce the errors in the discontinuous decomposition. The improved algorithm provides a more locally accurate decomposition of the data amidst data gaps. Overall, this simple but powerful algorithm expands EEMD's ability to locally extract periodic components from discontinuous data.

Feature Extraction of the Crack AE Signal Using HHT Transform

2013 ◽  
Vol 340 ◽  
pp. 441-444
Author(s):  
K.F. He ◽  
Z.J. Zhang ◽  
X.J. Li
Keyword(s):  
Acoustic Emission ◽  
Empirical Mode Decomposition ◽  
Crack Depth ◽  
Intrinsic Mode Functions ◽  
Hilbert Spectrum ◽  
Hilbert Huang Transform ◽  
Mode Function ◽  
Mode Decomposition ◽  
Marginal Spectrum ◽  
Ae Signal

The use of Hilbert-Huang transform (Hilbert-Huang transform, HHT) on crack AE signal study, through empirical mode decomposition (empirical mode decomposition, EMD) AE signal is decompose into a number of intrinsic mode functions (Intrinsic mode Function, IMF), Hilbert spectrum and Hilbert marginal spectrum are calculated. The results show that crack depth structure bearing of acoustic emission are detected accurately by the number of acoustic emission events, time and crack the degree from Hilbert spectrum and Hilbert marginal spectrum.

Approach to extracting gear fault feature based on dominant intrinsic mode function

2014 ◽  
Vol 228 (15) ◽  
pp. 2810-2819 ◽  
Author(s):  
Zhifeng Liu ◽  
Bing Luo ◽  
Wentong Yang ◽  
Ligang Cai ◽  
Jingying Zhang
Keyword(s):  
Empirical Mode Decomposition ◽  
Intrinsic Mode Function ◽  
Good Time ◽  
Intrinsic Mode Functions ◽  
Time Frequency ◽  
Mode Function ◽  
Mode Decomposition ◽  
Gear Fault ◽  
Rate Evaluation ◽  
Instantaneous Energy

Complex nonlinear and nonstationary signals can be adaptively analyzed by the Hilbert–Huang transform through empirical mode decomposition and the Hilbert transform to generate the instantaneous energy. The instantaneous energy was able to display the local characteristics of the signals and had good time–frequency analysis capability, it is therefore widely applied to the analysis of vibration signals in the field of gear fault diagnosis. However, only a few extracted intrinsic mode functions through empirical mode decomposition can reflect fault feature or closely related to the faults but others are irrelevant. Therefore, the fault feature of the instantaneous energy for all intrinsic mode functions was not obvious and the accuracy of diagnosis was low. Aimed at solving this problem, a fault leading rate evaluation algorithm was proposed that can select those intrinsic mode functions, which reflect fault features (it was called the dominant intrinsic mode function) from all intrinsic mode functions. In the paper, this algorithm was applied to gear fault feature extraction. By calculating the instantaneous energy of the dominant intrinsic mode function the method could accurately extract gear fault feature and improve the accuracy of diagnosis. Both simulated signals and experimental signals of a Klingelnberg bevel gear were analyzed to verify the effectiveness and correctness of the algorithm.

A New Spectral Representation of Earthquake Recordings Using an Improved Hilbert-Huang Transform

2011 ◽  
Vol 255-260 ◽  
pp. 1671-1675
Author(s):  
Tian Li Huang ◽  
Wei Xin Ren ◽  
Meng Lin Lou
Keyword(s):  
Empirical Mode Decomposition ◽  
Spectral Representation ◽  
Low Frequency ◽  
Accurate Information ◽  
Intrinsic Mode Functions ◽  
Hilbert Spectrum ◽  
Hilbert Huang Transform ◽  
Time Frequency ◽  
Mode Decomposition ◽  
Marginal Spectrum

A new spectral representation method of earthquake recordings using an improved Hilbert-Huang transform (HHT) is proposed in the paper. Firstly, the problem that the intrinsic mode functions (IMFs) decomposed by the empirical mode decomposition (EMD) in HHT is not exactly orthogonal is pointed out and improved through the Gram-Schmidt orthogonalization method which is referred as the orthogonal empirical mode decomposition (OEMD). Combined the OEMD and the Hilbert transform (HT) which is referred as the improved Hilbert-Huang transform (IHHT), the orthogonal intrinsic mode functions (OIMFs) and the orthogonal Hilbert spectrum (OHS) and the orthogonal Hilbert marginal spectrum (OHMS) are obtained. Then, the IHHT has been applied for the analysis of the El Centro earthquake recording. The obtained spectral representation result shows that the OHS gives more detailed and accurate information in a time–frequency–energy presentation than the Hilbert spectrum (HS) and the OHMS gives more faithful low-frequency energy presentation than the Fourier spectrum (FS) and the Hilbert marginal spectrum (HMS).

Study on Vibration Signal Marginal Spectrum of Paper-Transferring System in Printing Press Based on EMD

2010 ◽  
Vol 139-141 ◽  
pp. 2464-2468
Author(s):  
Yi Ming Wang ◽  
Shao Hua Zhang ◽  
Zhi Hong Zhang ◽  
Jing Li
Keyword(s):  
Empirical Mode Decomposition ◽  
Optimization Design ◽  
Impact Load ◽  
Vibration Signal ◽  
Key Factors ◽  
Mode Function ◽  
Mode Decomposition ◽  
Marginal Spectrum ◽  
Periodic Signals ◽  
The Moment

The precision of transferring paper is key factors to decide the print overprint accuracy, and vibration has an important impact on paper transferring accuracy. Empirical mode decomposition (EMD) can be used to extract the features of vibration test signal. According to the intrinsic mode function (IMF) by extracted, it is useful to analyze the dynamic characteristics of swing gripper arm on motion state. Due to the actual conditions of printing, the vibration signal of Paper-Transferring mechanism system is complex quasi periodic signals. Hilbert-Huang marginal spectrum that is based on empirical mode decomposition can solve the problem which is modals leakage by FFT calculated in frequency domain. Through the experimental research, the phase information of impact load at the moment of grippers opening or closing, which can be used for the optimization design of Paper-Transferring system and the improvement in the accuracy of swing gripper arm.

Multifractal characterization of mechanical vibration signals through improved empirical mode decomposition-based detrended fluctuation analysis

2016 ◽  
Vol 231 (22) ◽  
pp. 4139-4149 ◽  
Author(s):  
Du Wenliao ◽  
Guo Zhiqiang ◽  
Gong Xiaoyun ◽  
Xie Guizhong ◽  
Wang Liangwen ◽  
...  
Keyword(s):  
Empirical Mode Decomposition ◽  
Detrended Fluctuation Analysis ◽  
Fluctuation Analysis ◽  
Intrinsic Mode Functions ◽  
Vibration Signals ◽  
Multifractal Detrended Fluctuation Analysis ◽  
Mode Decomposition ◽  
Kolmogorov Smirnov ◽  
Detrended Fluctuation ◽  
Smirnov Test

A novel multifractal detrended fluctuation analysis based on improved empirical mode decomposition for the non-linear and non-stationary vibration signal of machinery is proposed. As the intrinsic mode functions selection and Kolmogorov–Smirnov test are utilized in the detrending procedure, the present approach is quite available for contaminated data sets. The intrinsic mode functions selection is employed to deal with the undesired intrinsic mode functions named pseudocomponents, and the two-sample Kolmogorov–Smirnov test works on each intrinsic mode function and Gaussian noise to detect the noise-like intrinsic mode functions. The proposed method is adaptive to the signal and weakens the effect of noise, which makes this approach work well for vibration signals collected from poor working conditions. We assess the performance of the proposed procedure through the classic multiplicative cascading process. For the pure simulation signal, our results agree with the theoretical results, and for the contaminated time series, the proposed method outperforms the traditional multifractal detrended fluctuation analysis methods. In addition, we analyze the vibration signals of rolling bearing with different fault types, and the presence of multifractality is confirmed.

Ensemble Empirical Mode Decomposition Based Deep Learning Model for Short-Term Wind Power Forecasting

2022 ◽  
Author(s):  
J.M. González-Sopeña
Keyword(s):  
Deep Learning ◽  
Wind Power ◽  
Empirical Mode Decomposition ◽  
Time Series Data ◽  
Ensemble Empirical Mode Decomposition ◽  
Series Data ◽  
Intrinsic Mode Functions ◽  
Wind Power Forecasting ◽  
Mode Decomposition ◽  
Power Forecasting

Abstract. In the last few years, wind power forecasting has established itself as an essential tool in the energy industry due to the increase of wind power penetration in the electric grid. This paper presents a wind power forecasting method based on ensemble empirical mode decomposition (EEMD) and deep learning. EEMD is employed to decompose wind power time series data into several intrinsic mode functions and a residual component. Afterwards, every intrinsic mode function is trained by means of a CNN-LSTM architecture. Finally, wind power forecast is obtained by adding the prediction of every component. Compared to the benchmark model, the proposed approach provides more accurate predictions for several time horizons. Furthermore, prediction intervals are modelled using quantile regression.

Sign in / Sign up

Export Citation Format

Share Document