scholarly journals Identification of Corrosion on a Hollow Tube Using Vibration

2014 ◽  
Vol 564 ◽  
pp. 176-181
Author(s):  
S.T. Cheng ◽  
Nawal Aswan Abdul Jalil ◽  
Zamir A. Zulkefli
Keyword(s):  
Free Boundary ◽  
Boundary Conditions ◽  
Natural Frequency ◽  
Impact Loading ◽  
Structural Damage ◽  
Natural Frequencies ◽  
Localized Corrosion ◽  
Free Boundary Conditions ◽  
The Impact ◽  
Impact Vibration

Vibration based technique have so far been focused on the identification of structural damage. However, not many studies have been conducted on the corrosion identification on pipes. The objective of this paper is to identify corrosion on pipes from vibration measurements. A hollow pipe, 500 mm in length with 63.5 mm in diameter was subjected to impact loading using an impact hammer to identify the natural frequency of the tube in two conditions i) without any corrosion and ii) with an induced localized 40 mm by 40 mm corrosion at the middle of the pipe. The shift of natural frequencies of the structures under free boundary conditions was examined for each node of excitation. The results showed that there is a shift in natural frequency of the pipe, between 3 and 4 Hz near to the corrosion area. It can suggested that that the impact vibration is capable of identifying of localized corrosion on a hollow tube.

Node Control of Uniform Beams Subject to Various Boundary Conditions

1992 ◽  
Vol 59 (4) ◽  
pp. 983-990 ◽  
Author(s):  
L. Weaver ◽  
L. Silverberg
Keyword(s):  
Free Boundary ◽  
Boundary Conditions ◽  
Natural Frequencies ◽  
Controlled System ◽  
Free Boundary Conditions ◽  
Various Boundary Conditions ◽  
Natural Modes ◽  
Modes Of Vibration ◽  
Control Forces ◽  
Direct Feedback

This paper introduces node control, whereby discrete direct feedback control forces are placed at the nodes of the N+1th mode (the lowest N modes participate in the response). Node control is motivated by the node control theorem which states, under certain conditions, that node control preserves the natural frequencies and natural modes of vibration of the controlled system while achieving uniform damping. The node control theorem is verified for uniform beams with pinned-pinned, cantilevered, and free-free boundary conditions, and two cases of beams with springs on the boundaries. A general proof of the node control theorem remains elusive.

scholarly journals Local Well-Posedness for Free Boundary Problem of Viscous Incompressible Magnetohydrodynamics

Mathematics ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 461
Author(s):  
Kenta Oishi ◽  
Yoshihiro Shibata
Keyword(s):  
Free Surface ◽  
Free Boundary ◽  
Boundary Conditions ◽  
Stokes Equations ◽  
Mhd Flow ◽  
Transmission Conditions ◽  
Well Posedness ◽  
Anisotropic Space ◽  
Free Boundary Conditions ◽  
Incompressible Magnetohydrodynamics

In this paper, we consider the motion of incompressible magnetohydrodynamics (MHD) with resistivity in a domain bounded by a free surface. An electromagnetic field generated by some currents in an external domain keeps an MHD flow in a bounded domain. On the free surface, free boundary conditions for MHD flow and transmission conditions for electromagnetic fields are imposed. We proved the local well-posedness in the general setting of domains from a mathematical point of view. The solutions are obtained in an anisotropic space Hp1((0,T),Hq1)∩Lp((0,T),Hq3) for the velocity field and in an anisotropic space Hp1((0,T),Lq)∩Lp((0,T),Hq2) for the magnetic fields with 2<p<∞, N<q<∞ and 2/p+N/q<1. To prove our main result, we used the Lp-Lq maximal regularity theorem for the Stokes equations with free boundary conditions and for the magnetic field equations with transmission conditions, which have been obtained by Frolova and the second author.

scholarly journals Analysis of Timoshenko beam with Koch snowflake cross-section and variable properties in different boundary conditions using finite element method

2021 ◽  
Vol 13 (11) ◽  
pp. 168781402110609
Author(s):  
Hossein Talebi Rostami ◽  
Maryam Fallah Najafabadi ◽  
Davood Domiri Ganji
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Boundary Conditions ◽  
Natural Frequency ◽  
Cross Section ◽  
Timoshenko Beam ◽  
Natural Frequencies ◽  
Variable Properties ◽  
The Third ◽  
Koch Snowflake

This study analyzed a Timoshenko beam with Koch snowflake cross-section in different boundary conditions and for variable properties. The equation of motion was solved by the finite element method and verified by Solidworks simulation in a way that the maximum error was about 2.9% for natural frequencies. Displacement and natural frequency for each case presented and compared to other cases. Significant research achievements illustrate that if we change the Koch snowflake cross-section of the beam from the first iteration to the second, the area and moment of inertia will increase, and we have a 5.2% rise in the first natural frequency. Similarly, by changing the cross-section from the second iteration to the third, a 10.2% growth is observed. Also, the hollow cross-section is considered, which can enlarge the natural frequency by about 26.37% compared to a solid one. Moreover, all the clamped-clamped, hinged-hinged, clamped-free, and free-free boundary conditions have the highest natural frequency for the Timoshenko beam with the third iteration of the Koch snowflake cross-section in solid mode. Finally, examining important physical parameters demonstrates that variable density from a minimum value to the standard value along the beam increases the natural frequencies, while variable elastic modulus decreases it.

Sign in / Sign up

Export Citation Format

Share Document