Research on College Teaching Building Energy Saving Design

2014 ◽  
Vol 641-642 ◽  
pp. 1016-1020 ◽  
Author(s):  
Ju Xue ◽  
Shu Pei Wang ◽  
Jia Huang
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
College Teaching ◽  
Building Energy ◽  
University Teaching ◽  
Three Gorges ◽  
Consumption Situation ◽  
Building Energy Saving

In recent years, with the increasing of energy consumption in our country, about the energy consumption problem of teaching buildings in university becomes more and more important. In this article, through analyzing the characteristics and energy consumption situation of the teaching building in Three Gorges University, and put forward some problems existing in university teaching building energy saving and the corresponding improvement suggestions, so as to promote the construction of the economical universities.

scholarly journals Modifying Building Energy-Saving Design Based on Field Research into Climate Features and Local Residents’ Habits

Energies ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 442
Author(s):  
Xiaoyue Zhu ◽  
Bo Gao ◽  
Xudong Yang ◽  
Zhong Yu ◽  
Ji Ni
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Residential Buildings ◽  
Average Energy ◽  
Field Tests ◽  
Building Energy ◽  
Building Energy Efficiency ◽  
Local Conditions ◽  
Building Energy Saving ◽  
Average Energy Consumption

In China, a surging urbanization highlights the significance of building energy conservation. However, most building energy-saving schemes are designed solely in compliance with prescriptive codes and lack consideration of the local situations, resulting in an unsatisfactory effect and a waste of funds. Moreover, the actual effect of the design has yet to be thoroughly verified through field tests. In this study, a method of modifying conventional building energy-saving design based on research into the local climate and residents’ living habits was proposed, and residential buildings in Panzhihua, China were selected for trial. Further, the modification scheme was implemented in an actual project with its effect verified by field tests. Research grasps the precise climate features of Panzhihua, which was previously not provided, and concludes that Panzhihua is a hot summer and warm winter zone. Accordingly, the original internal insulation was canceled, and the shading performance of the windows was strengthened instead. Test results suggest that the consequent change of SET* does not exceed 0.5 °C, whereas variations in the energy consumption depend on the room orientation. For rooms receiving less solar radiation, the average energy consumption increased by approximately 20%, whereas for rooms with a severe western exposure, the average energy consumption decreased by approximately 11%. On the other hand, the cost savings of removing the insulation layer are estimated at 177 million RMB (1 USD ≈ 6.5 RMB) per year. In conclusion, the research-based modification method proposed in this study can be an effective tool for improving building energy efficiency adapted to local conditions.

scholarly journals Evaluation on Innovation approaches on Performance from Malaysian perspective: A study on Malaysian Building energy saving

2018 ◽  
Vol 150 ◽  
pp. 06040
Author(s):  
M. H. Amlus ◽  
Amlus Ibrahim ◽  
Ahmad Zaidi Abdullah ◽  
Nurhafiza Azizan ◽  
Ummi Naeimah Saraeh
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Building Energy ◽  
Management Approach ◽  
Energy Audit ◽  
Advanced Country ◽  
Power Meter ◽  
Load Following ◽  
Current Usage ◽  
Building Energy Saving

Lately Malaysia energy consumption versus generation rapidly shows increasing due to increasing of load. This phenomenon happened following to advanced country development. Lacking on design and without energy management approach the energy consumption and monthly electrical bill will steadily increased and support the increasing of world carbon emission. Therefore the aim of this work is to approach the simplest innovation task-energy audit , which is load-apportioning strategy. This approach using matching the usage of equipment with fully utilized space and reschedules the time of usage. A one week data was collected by logged power meter at main switchboard at selected building using Fluke Power Recorder. From the data collected, current usage of every load can be determine, then load will be arrange into a group with same portion and same time of usage. The result shows clearly the energy consumption for every single day and indicates the highest and lowest peak. From this work the apportioning strategy implemented by rearrange the load following type of room application. After the arrangement, new measurement was taken and a very good result was established. This work also can be further apply for a huge load that can be save a lot of money for owner especially government by energy saving.

scholarly journals Research on the Building Energy Saving Development Planning Workout Pattern

2012 ◽  
Vol 1 (1) ◽  
pp. 9
Author(s):  
Ling Wang
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Building Energy ◽  
Development Planning ◽  
Planning Problem ◽  
Building Energy Consumption ◽  
Effective Measure ◽  
Building Energy Saving ◽  
Current Stage

<p>Based on the national situation and combined with status of building energy consumption, building energy saving development planning is the most effective measure to deal with the building energy consumption problem in China. Given the building energy saving development planning problem, proposals are given in terms of the planning patterns, planning flow and the organization, which would be of practical value to the implementation of building efficiency planning in China at current stage.</p>

Energy Consumption and Economic Analysis to Residential Building Meeting the Criterion of 65% Energy Saving in Zhangjiakou

2011 ◽  
Vol 225-226 ◽  
pp. 239-242 ◽  
Author(s):  
Hong Lei Ma ◽  
Jian Hui Niu
Keyword(s):  
Energy Consumption ◽  
Economic Analysis ◽  
Energy Saving ◽  
Residential Building ◽  
Building Energy ◽  
Simulation Software ◽  
Design Standard ◽  
Third Stage ◽  
Building Energy Saving ◽  
Saving Effect

An energy saving residential building in Zhangjiakou was took as research object, which was designed and constructed according to the criterion of 65% energy saving of the third stage, utilizing simulation software Dest, which was developed by Qinghua University, energy consumption simulation and economic analysis were done to the building. The results show that compared with the former residence which was built according to the non-energy saving design, the implementation of new design standard for building energy saving can not only achieve better energy saving effect, but also its payback period is short, so the new design standard for building energy saving is worth spreading.

Optimization of Public Building Energy Design Schemes Base on the Minimizing of Operating Energy Consumption

2012 ◽  
Vol 193-194 ◽  
pp. 21-25
Author(s):  
Min Chen ◽  
Min Jie Pang ◽  
Hong Guang Fang
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Design Process ◽  
Building Energy ◽  
Exterior Wall ◽  
Insulation System ◽  
Public Building ◽  
Software Simulation ◽  
The Public ◽  
Building Energy Saving

Firstly, this paper introduced several kinds of frequently-used thermal insulation system, which included exterior wall insulation system, doors and windows insulation system and roof insulation system. Secondly, the principle and method of the consumption simulation of the public buildings are expatiated on, including software simulation principle, design process and the setting of related parameters. Thirdly, taking a public building in Nantong, Jiangsu province as an example, the operating energy consumption of different energy-saving design schemes are simulated with the Tangent Building Energy-saving Computation (TBEC) software, and the energy saving design schemes of the public building are optimized in the view of minimizing the energy consumption. At last some references of public building energy saving design are provided.

Research on Measures of Civil Engineering Construction to Achieve the Landscape Green Energy Saving

2014 ◽  
Vol 716-717 ◽  
pp. 240-243
Author(s):  
Lin Ke ◽  
Ji Cui Chang ◽  
Quan Zheng
Keyword(s):  
Energy Consumption ◽  
Energy Conservation ◽  
Energy Saving ◽  
Civil Engineering ◽  
Building Energy ◽  
Green Energy ◽  
Low Carbon ◽  
Engineering Construction ◽  
Building Energy Saving ◽  
Save Energy

Low-carbon environment and energy saving have gradually into the enterprise development idea. In the construction industry, civil engineering construction of energy conservation and environmental protection has reached a certain level after a period of development. It is of great significance to build energy conservation measures in civil engineering for improving environmental quality and save energy consumption. This article analyzes measures from the civil engineering overview and application status of building energy saving measures, the importance of building energy saving measures in combination with civil engineering. The measures are important for our country to make a certain contribution to saving energy consumption and realize the sustainable development.

Building Energy-Saving Measures

2011 ◽  
Vol 374-377 ◽  
pp. 668-671
Author(s):  
Yun Feng Huang
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Building Design ◽  
Careful Analysis ◽  
Building Energy ◽  
Green Energy ◽  
Building Energy Consumption ◽  
Consumption Energy ◽  
Building Energy Saving ◽  
Current Energy

This paper aims to solve the current energy problems. After careful analysis of the building energy consumption, energy saving measures and ways were concluded in the matter of building design, application of green energy and building greening. The result of the study shows that actually integrated application of energy-saving measures will realize energy-saving purposes.

Potential and Economic Analysis of Office Building Energy Saving Reconstruction in Sunan Region

2013 ◽  
Vol 361-363 ◽  
pp. 422-426
Author(s):  
Xiao Ping Feng ◽  
Zhi Heng Jiang ◽  
Yu Han
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Building Energy ◽  
Economic Benefits ◽  
Office Building ◽  
Existing Buildings ◽  
Polyurethane Composite ◽  
Building Energy Saving ◽  
Indoor Comfort ◽  
New Buildings

with the vigorous development of construction in our country, the proportion of the building energy consumption in total is increasing step by step, especially the 1980s existing buildings, the vast majority of them failing to take any insulation measures, the energy consumption of them is several times or even ten times to new buildings, therefore, in recent years, energy saving reconstructions of existing buildings have paid more and more attention. This paper takes a typical office building which was built in sunan region as an example, using some external thermal insulation materials such as rigid polyurethane foam plastics, polyurethane composite board and energy saving design software BECS to imitate energy saving reconstruction. Besides, the economy of each scheme of energy saving reconstruction was also analyzed. The results show that, energy saving reconstruction can greatly reduce the energy consumption of existing buildings, and bring good economic benefits, at the same time, it also can improve indoor comfort and working conditions, and can generate significant social benefits.

Study on Energy Saving of External Wall Thermal Insulation Based on City Green Building

2014 ◽  
Vol 608-609 ◽  
pp. 1061-1065
Author(s):  
Lei Cao ◽  
Xue Nan Mu
Keyword(s):  
Energy Consumption ◽  
Energy Conservation ◽  
Energy Saving ◽  
Thermal Insulation ◽  
Green Building ◽  
Building Energy ◽  
External Wall ◽  
Building Energy Saving ◽  
Energy Saving Technology ◽  
The City

In recent years, with the continuous development of society, people's awareness of energy conservation has also been enhanced. Among them, building energy consumption occupies a very large proportion in all their energy consumption. Therefore, people have taken various measures to reduce the energy consumption of building its own. External wall thermal insulation is a new building energy saving technology. Through verification, application of external wall insulation technology in building energy saving greatly reduces the energy consumption of buildings. This paper mainly introduced on the city building external wall thermal insulation technology and some related measures.

Sign in / Sign up

Export Citation Format

Share Document