Study of On-Line Detection of Voltage Transient Disturbance Based on DSP and Wavelet

2014 ◽  
Vol 664 ◽  
pp. 288-292
Author(s):  
Xi Xia Huang ◽  
Fei Wang ◽  
Cheng Hou ◽  
Bing Zhang
Keyword(s):  
Wavelet Transform ◽  
Data Processing ◽  
Real Time ◽  
Digital Signal Processor ◽  
Electrical Signal ◽  
Discrete Wavelet ◽  
Processing Unit ◽  
On Line ◽  
Transient Voltage ◽  
Disturbance Detection

In this paper, a set of voltage disturbance detection device based on DSP2812 was designed and a method of transient voltage disturbance detection based on DSP and Wavelet Transform was studied. The device collects electrical signal through a Hall sensor and the parallel A/D converter and regards TMS320F2812, a kind of high-performance digital signal processor (DSP), as a core data processing unit. Discrete Wavelet Transform (DWT) algorithm on DSP board was carried out to detect transient voltage disturbance. Software modules including the main program module, A/D module, interrupt module, communication module and so on was designed. The DWT algorithm on DSP board which could detect transient voltage disturbance on line was carried out based on the strong operation ability of DSP and the high effectiveness of DWT algorithm. This device can simultaneously realize power acquisition and voltage disturbance analysis in real-time. Contrast tests show that the device is of high-precision, of high-data-processing-speed and has a capability of voltage disturbance detecting in real-time.

scholarly journals Discrete Wavelet Transform for the Real-Time Smoothing of Wind Turbine Power Using Li-Ion Batteries

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2184
Author(s):  
Andrea Mannelli ◽  
Francesco Papi ◽  
George Pechlivanoglou ◽  
Giovanni Ferrara ◽  
Alessandro Bianchini
Keyword(s):  
Wavelet Transform ◽  
Wind Turbine ◽  
Discrete Wavelet Transform ◽  
Real Time ◽  
Power Output ◽  
Discrete Wavelet ◽  
Smoothing Technique ◽  
The Real ◽  
Power Smoothing ◽  
Li Ion

Energy Storage Systems (EES) are key to further increase the penetration in energy grids of intermittent renewable energy sources, such as wind, by smoothing out power fluctuations. In order this to be economically feasible; however, the ESS need to be sized correctly and managed efficiently. In the study, the use of discrete wavelet transform (Daubechies Db4) to decompose the power output of utility-scale wind turbines into high and low-frequency components, with the objective of smoothing wind turbine power output, is discussed and applied to four-year Supervisory Control And Data Acquisition (SCADA) real data from multi-MW, on-shore wind turbines provided by the industrial partner. Two main research requests were tackled: first, the effectiveness of the discrete wavelet transform for the correct sizing and management of the battery (Li-Ion type) storage was assessed in comparison to more traditional approaches such as a simple moving average and a direct use of the battery in response to excessive power fluctuations. The performance of different storage designs was compared, in terms of abatement of ramp rate violations, depending on the power smoothing technique applied. Results show that the wavelet transform leads to a more efficient battery use, characterized by lower variation of the averaged state-of-charge, and in turn to the need for a lower battery capacity, which can be translated into a cost reduction (up to −28%). The second research objective was to prove that the wavelet-based power smoothing technique has superior performance for the real-time control of a wind park. To this end, a simple procedure is proposed to generate a suitable moving window centered on the actual sample in which the wavelet transform can be applied. The power-smoothing performance of the method was tested on the same time series data, showing again that the discrete wavelet transform represents a superior solution in comparison to conventional approaches.

Real Time QRS Detection Based on Redundant Discrete Wavelet Transform

2016 ◽  
Vol 14 (4) ◽  
pp. 1662-1668 ◽  
Author(s):  
Ernano Arrais Junior ◽  
Ricardo Alexandro de Medeiros Valentim ◽  
Glaucio Bezerra Brandao
Keyword(s):  
Wavelet Transform ◽  
Discrete Wavelet Transform ◽  
Real Time ◽  
Discrete Wavelet ◽  
Qrs Detection ◽  
Redundant Discrete Wavelet Transform

scholarly journals Discrete and Dual Tree Wavelet Features for Real-Time Speech/Music Discrimination

2011 ◽  
Vol 2011 ◽  
pp. 1-10 ◽  
Author(s):  
Timur Düzenli ◽  
Nalan Özkurt
Keyword(s):  
Wavelet Transform ◽  
Real Time ◽  
Wavelet Transforms ◽  
Principal Component ◽  
Discrete Wavelet ◽  
Vanishing Moments ◽  
Zero Crossings ◽  
Time Frequency ◽  
Common Time ◽  
Classification Tool

The performance of wavelet transform-based features for the speech/music discrimination task has been investigated. In order to extract wavelet domain features, discrete and complex orthogonal wavelet transforms have been used. The performance of the proposed feature set has been compared with a feature set constructed from the most common time, frequency and cepstral domain features such as number of zero crossings, spectral centroid, spectral flux, and Mel cepstral coefficients. The artificial neural networks have been used as classification tool. The principal component analysis has been applied to eliminate the correlated features before the classification stage. For discrete wavelet transform, considering the number of vanishing moments and orthogonality, the best performance is obtained with Daubechies8 wavelet among the other members of the Daubechies family. The dual tree wavelet transform has also demonstrated a successful performance both in terms of accuracy and time consumption. Finally, a real-time discrimination system has been implemented using the Daubhecies8 wavelet which has the best accuracy.

Real-Time Vehicle License Plate Recognition Based on Scanning and 2D Haar Discrete Wavelet Transform

2013 ◽  
Vol 284-287 ◽  
pp. 2402-2406 ◽  
Author(s):  
Rong Choi Lee ◽  
King Chu Hung ◽  
Huan Sheng Wang
Keyword(s):  
Wavelet Transform ◽  
Discrete Wavelet Transform ◽  
Real Time ◽  
Recognition Rate ◽  
Low Frequency ◽  
Experimental Result ◽  
Discrete Wavelet ◽  
License Plate ◽  
License Plate Recognition ◽  
Image Pixels

This thesis is to approach license-plate recognition using 2D Haar Discrete Wavelet Transform (HDWT) and artificial neural network. This thesis consists of three main parts. The first part is to locate and extract the license-plate. The second part is to train the license-plate. The third part is to real time scan recognition. We select only after the second 2D Haar Discrete Wavelet Transform the image of low-frequency part, image pixels into one-sixteen, thus, reducing the image pixels and can increase rapid implementation of recognition and the computer memory. This method is to scan for car license plate recognition, without make recognition of the individual characters. The experimental result can be high recognition rate.

An efficient solution for fast generation of multi-GNSS real-time products

2021 ◽  
Author(s):  
Hongjie Zheng ◽  
Hanyu Chang ◽  
Yongqiang Yuan ◽  
Qingyun Wang ◽  
Yuhao Li ◽  
...  
Keyword(s):  
Data Processing ◽  
Real Time ◽  
Processing Time ◽  
Efficient Solution ◽  
Gpu Computing ◽  
Sampling Rate ◽  
Precise Orbit Determination ◽  
Processing Unit ◽  
Processing Efficiency ◽  
Central Processing

<p>Global navigation satellite systems (GNSS) have been playing an indispensable role in providing positioning, navigation and timing (PNT) services to global users. Over the past few years, GNSS have been rapidly developed with abundant networks, modern constellations, and multi-frequency observations. To take full advantages of multi-constellation and multi-frequency GNSS, several new mathematic models have been developed such as multi-frequency ambiguity resolution (AR) and the uncombined data processing with raw observations. In addition, new GNSS products including the uncalibrated phase delay (UPD), the observable signal bias (OSB), and the integer recovery clock (IRC) have been generated and provided by analysis centers to support advanced GNSS applications.</p><p>       However, the increasing number of GNSS observations raises a great challenge to the fast generation of multi-constellation and multi-frequency products. In this study, we proposed an efficient solution to realize the fast updating of multi-GNSS real-time products by making full use of the advanced computing techniques. Firstly, instead of the traditional vector operations, the “level-3 operations” (matrix by matrix) of Basic Liner Algebra Subprograms (BLAS) is used as much as possible in the Least Square (LSQ) processing, which can improve the efficiency due to the central processing unit (CPU) optimization and faster memory data transmission. Furthermore, most steps of multi-GNSS data processing are transformed from serial mode to parallel mode to take advantage of the multi-core CPU architecture and graphics processing unit (GPU) computing resources. Moreover, we choose the OpenBLAS library for matrix computation as it has good performances in parallel environment.</p><p>       The proposed method is then validated on a 3.30 GHz AMD CPU with 6 cores. The result demonstrates that the proposed method can substantially improve the processing efficiency for multi-GNSS product generation. For the precise orbit determination (POD) solution with 150 ground stations and 128 satellites (GPS/BDS/Galileo/GLONASS/QZSS) in ionosphere-free (IF) mode, the processing time can be shortened from 50 to 10 minutes, which can guarantee the hourly updating of multi-GNSS ultra-rapid orbit products. The processing time of uncombined POD can also be reduced by about 80%. Meanwhile, the multi-GNSS real-time clock products can be easily generated in 5 seconds or even higher sampling rate. In addition, the processing efficiency of UPD and OSB products can also be increased by 4-6 times.</p>

Mobile GPU Computing Based Filter Bank Convolution for Three-Dimensional Wavelet Transform

Biometrics ◽  
2017 ◽  
pp. 761-777
Author(s):  
Di Zhao
Keyword(s):  
Wavelet Transform ◽  
Discrete Wavelet Transform ◽  
Real Time ◽  
Gpu Computing ◽  
Three Dimensional ◽  
Discrete Wavelet ◽  
Computational Results ◽  
Real Time Processing ◽  
Time Processing ◽  
Mobile Gpu

Mobile GPU computing, or System on Chip with embedded GPU (SoC GPU), becomes in great demand recently. Since these SoCs are designed for mobile devices with real-time applications such as image processing and video processing, high-efficient implementations of wavelet transform are essential for these chips. In this paper, the author develops two SoC GPU based DWT: signal based parallelization for discrete wavelet transform (sDWT) and coefficient based parallelization for discrete wavelet transform (cDWT), and the author evaluates the performance of three-dimensional wavelet transform on SoC GPU Tegra K1. Computational results show that, SoC GPU based DWT is significantly faster than SoC CPU based DWT. Computational results also show that, sDWT can generally satisfy the requirement of real-time processing (30 frames per second) with the image sizes of 352×288, 480×320, 720×480 and 1280×720, while cDWT can only obtain read-time processing with small image sizes of 352×288 and 480×320.

Sign in / Sign up

Export Citation Format

Share Document