Utilization of Coal Mine Water

2014 ◽  
Vol 707 ◽  
pp. 202-207
Author(s):  
Ai Jun Shao ◽  
Shi Wen Wang ◽  
Lin Lin Chai ◽  
Qiang Wang ◽  
Ying Liu ◽  
...  

China is a big country of coal production, in the coal mining process, the great massive mine drainage has caused not only the waste of groundwater resource, but also environmental pollution. On the other hand, mining production and life supply water is very scarce. According to the mine water features, the majority of mine drainage water belonging to the mine water containing suspended, the mine water needs to do the necessary purification then can be used. What the purification mainly eliminates is the suspended. In this paper, the method of purification and the technological process about mine water are discussed. The main methods of handling are coagulation, sedimentation, filtration and disinfection. According to different characteristics of water quality, different ways of handling and technological processes have to be chosen. Finally, the purification and utilization of mine water are shown through practical examples, Pingdingshan Coal Group Company, Wannian Coal Mine of Fengfeng Group Limited Company and Tangshan Coal Mine of Kailuan Group Company, to have obvious social, economic and environmental benefits.

2012 ◽  
Vol 178-181 ◽  
pp. 543-548
Author(s):  
Ai Jun Shao ◽  
Zhi Guang Li

China is a big country of coal production, in the coal mining process, the great massive mine drainage has caused not only the waste of groundwater resource, but also environmental pollution. On the other hand, mining production and life supply water is very scarce. According to the mine water features, the majority of mine drainage water belonging to the mine water containing suspended, the mine water needs to do the necessary purification then can be used. That purification mainly eliminates is the suspended. In this paper, the method of purification and the technological process about mine water are discussed. The main methods of handling are coagulation, sedimentation, filtration and disinfection. According to different characteristics of water quality, different ways of handling and technological processes have to be chosen. Finally, the purification and utilization of mine water are shown through practical examples, Pingdingshan Coal Group Company, Wannian Coal Mine of Fengfeng Group Limited Company and Tangshan Coal Mine of Kailuan Group Company, to have obvious social, economic and environmental benefits.


2021 ◽  
Vol 25 ◽  
pp. 100143
Author(s):  
Krzysztof Mitko ◽  
Aleksandra Noszczyk ◽  
Piotr Dydo ◽  
Marian Turek
Keyword(s):  

2011 ◽  
Vol 26 ◽  
pp. 264-270 ◽  
Author(s):  
Qiucheng Zhang ◽  
Jinhai Li ◽  
Bingshen Liu ◽  
Xiaoguo Chen

Separations ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 6
Author(s):  
Yulong Zhang ◽  
Peikun Liu ◽  
Linjing Xiao ◽  
Long Chang ◽  
Fangping Yan ◽  
...  

In this study, a coal mine water flocculation system was established. A series of flocculation tests were carried out at different structural parameters (cylinder height, cone-plate insertion depth and cone-plate spacing) to better investigate the effect of the cone-plate clarifier on coal mine water treatment performance. Sixteen sampling points were set up in the system for data monitoring to generate the required data. The cone-plate clarifier was divided into five zones for flocculation analysis. The increased cylinder height facilitated the flocculation of particles in the micro flocculation zone and the settling of particles in the settlement zone. The chemicals used are polyaluminum chloride (PACl), Fe3O4 and polyacrylamide (PAM), corresponding to doses of 60 mg/L, 40 mg/L and 6 mg/L, respectively. Insufficient insertion depth of the cone-plate will cause the small flocs that have not been fully flocculated to enter the exit pipe zone directly through the cone-plate, while too much insertion depth will cause the large floc in the settlement zone to re-enter the exit pipe zone. The flocculation effect of small flocs increased as the cone-plate spacing decreased, which is consistent with the shallow pool theory. When the cone plate spacing was too narrow, the amount of fluid was reduced and the increase in fluid velocity reduced the flocculation effect. Curve fitting was conducted for Suspended solids(SS) and turbidity removal efficiency under each structural parameter to derive the variation of SS and turbidity removal efficiency under different structural parameters. The regression models of SS and turbidity removal efficiency on the cylinder height, cone-plate insertion depth and cone-plate spacing were established based on the curve fitting results, and the regression models were verified to be well fitted based on the comparison of experimental results. Finally, the optimal values of SS and turbidity removal efficiency were found based on the regression model. The flow rate of the cone-plate clarifier is 0.6 m3/h. The SS removal efficiency reached 96.82% when the cylinder height was 708 mm, the cone-plate insertion depth was 367 mm and the cone-plate spacing was 26 mm. The turbidity removal efficiency reached 86.75% when the cylinder height was 709 mm, the cone-plate insertion depth was 369 mm and the cone-plate spacing was 26 mm.


2019 ◽  
Author(s):  
Djuna Gulliver ◽  
◽  
James Gardiner ◽  
Daniel Ross ◽  
Daniel Lipus ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document