Implementation of Lean Tools-Value Stream Mapping & SMED for Lead Time Reduction in Industrial Valve Manufacturing Company

2015 ◽  
Vol 813-814 ◽  
pp. 1170-1175
Author(s):  
Mohammad Ashif ◽  
Sanjay Goyal ◽  
Ashish Shastri
Keyword(s):  
Lean Manufacturing ◽  
Lead Time ◽  
Setup Time ◽  
Current Data ◽  
Value Stream Mapping ◽  
Value Stream ◽  
Current State ◽  
Engineering Technique ◽  
Manufacturing Company ◽  
Value Stream Map

In lean manufacturing environment Value Stream Mapping (VSM) & SMED are one of the renewed industrial engineering technique used worldwide. VSM is used for visualizing the system of manufacturing and many other relevant processes and helps in great extend to understand to system itself effectively. Single Minute Exchange of Dies (SMED) helps to reduce the setup time of process. A valve manufacturing company was being selected for Case study. First we draw the current state value stream map. From the current data analysis find out the problems and give some recommendations to improve the production lead time and provide a future state value stream map, we reduced the lead time through VSM, from 46.63 days to 43.03 day. Second we applied SMED techniques & reduced the setup time from 21 min to 16 min in bonnet machining operation of valve.

Implementation of the Lean Model for Carrying out Value Stream Mapping and SMED in the Aerospace Engine Case Production

2012 ◽  
Vol 542-543 ◽  
pp. 302-310 ◽  
Author(s):  
Chen Hua Wang ◽  
Jar Her Kao ◽  
Sanjay Kumar Thakur
Keyword(s):  
Production Line ◽  
Lean Manufacturing ◽  
Lead Time ◽  
Setup Time ◽  
Second Step ◽  
Value Stream Mapping ◽  
Value Stream ◽  
Current State ◽  
Industry Sectors ◽  
Value Stream Map

The lean manufacturing has been widely applied in the most of the industry sectors. Single Minute Exchange of Dies (SMED) is one of lean manufacturing tools that can be used to further reduce production waste. In order to ensure waste be effectively reduced, lean manufacturing has tools to achieve its goal. The first step is analysis of current state value stream map from the production line. The second step is the use of Single Minute Exchange of Dies to propose and carry out improvement actions in bottleneck process. In this study, the aerospace engine case production lead time was reduced from 9 weeks to 7 weeks by VSM method. The SMED method was applied to improve bottleneck’s setup time from 95.68 minutes to 76.97 minutes. The lean manufacturing tool can help factory to reduce inventory in the WIP.

scholarly journals MEMINIMASI PEMBOROSAN DENGAN LEAN MANUFACTURING PADA PROSES PRODUKSI DI PT. IE

2021 ◽  
pp. 1451
Author(s):  
Ahmad Ahmad ◽  
Helena JK ◽  
Andrean Yonathan
Keyword(s):  
Waiting Time ◽  
Cycle Time ◽  
Lean Manufacturing ◽  
Lead Time ◽  
Fault Tree Analysis ◽  
Value Stream Mapping ◽  
Tree Analysis ◽  
Value Stream ◽  
Current State ◽  
Future State

PT. IE is engaged in the business of making Lighting and Lampposts. Based on observations and interviews, there are still some wastes that arise in the flow of the production process, among which there are still many wastes of waiting time, transportation, movement and inventory. These wastes cause the product completion time to be longer and the resulting quality decreases. To eliminate or reduce waste, it is necessary to apply Lean Manufacturing. Lean Manufacturing is a systematic approach to eliminating waste and changing processes by identifying and reducing waste with continuous improvement and striving to create a production flow along the value stream by eliminating all forms of waste and increasing the added value of products to customers. From the Pareto diagram, it is found that transportation waste has the highest percentage of 26.21%, waiting time is 21.38%, motion waste is 19.31% and waste inventories are 15.17%. while the results of the Value Stream Mapping Current State Map mapping obtained a production lead time of 7,680 seconds and a total cycle time of 6,660 seconds and a PCE Current State Map value of 53.09%. Identify the root causes of waste using Fishbone diagrams, 5 Why Analysis, 5W+1H, Fault Tree Analysis and FMEA. After corrective actions have been taken, based on the Value Stream Mapping Future mapping there is a decrease in production lead time to 5,220 seconds and a decrease in total cycle time to 4,860 seconds and an increase in PCE Future State Map to 68.10% so that there is an increase of 15.01% which shows The company's production process has become more Lean.PT. IE bergerak dalam bisnis pembuatan Lighting dan Tiang Lampu. Berdasarkan observasi dan wawancara, masih terdapat beberapa pemborosan (waste) yang timbul di aliran proses produksi di antaranya masih banyak terjadi pemborosan-pemborosan waktu tunggu, transportasi, gerakan dan inventori. Pemborosan-pemborosan tersebut menyebabkan waktu penyelesaian produk menjadi lebih lama dan kualitas yang dihasilkan menurun. Untuk menghilangkan atau mengurangi pemborosan diperlukan adanya penerapan Lean Manufacturing.Lean Manufacturing merupakan pendekatan sistematik untuk mengeliminasi pemborosan dan mengubah proses dengan cara mengidentifikasi dan mengurangi pemborosan dengan perbaikan kontinu dan berupaya untuk menciptakan aliran produksi sepanjang value stream dengan menghilangkan segala bentuk pemborosan serta meningkatkan nilai tambah produk kepada pelanggan. Dari diagram Pareto ditemukan waste transportasi memiliki persentase paling tinggi sebesar 26,21%, waktu tunggu  21,38%, waste motion 19,31% dan waste inventories 15,17%. sedangkan hasil pemetaan Value Stream Mapping Current State Map diperoleh production lead time selama 7.680 detik dan total cycle time selama 6.660 detik serta nilai PCE Current State Map sebesar 53,09%. Identifikasi akar permasalahan pemborosan menggunakan diagram Fishbone, 5 Why Analysis, 5W+1H, Fault Tree Analysis dan FMEA. Setelah dilakukan tindakan–tindakan perbaikan, berdasarkan pemetaan Value Stream Mapping Future ada penurunan production lead time menjadi 5.220 detik dan penurunan total cycle time menjadi 4.860 detik serta ada peningkatan PCE Future State Map menjadi 68,10% sehingga ada peningkatan 15,01% yang menunjukan proses produksi perusahaan telah menjadi lebih Lean.

scholarly journals WASTE ELIMINATION USING VALUE STREAM MAPPING AND VALSAT

2017 ◽  
Vol 3 (2) ◽  
Author(s):  
Dion Avellino Suyanto ◽  
Sunday Noya
Keyword(s):  
Lean Manufacturing ◽  
Lead Time ◽  
Value Stream Mapping ◽  
Value Stream ◽  
Current State ◽  
Future State ◽  
Analysis Tools ◽  
Fierce Competition ◽  
Cycle Efficiency ◽  
Working Efficiency

Fierce competition encourages companies to make continuous improvements to achieve better working efficiency. One method to improve the working efficiency is using the concept of lean manufacturing. The efficiency of the existing work in PT. Rimba Kencana is still not good because there are many processes that are not uniform and because of that, production lead time is increased. By using value stream mapping and value stream analysis tools (VALSAT), the production processes in the company are mapped into the current state mapping and future state mapping. In the current state mapping, the total value of production lead time is 59.49 days and the value of process cycle efficiency (PCE) is 0.013%. After doing improvement on welding department, the total value of production lead time decreased to 48.22 days and the value of process cycle efficiency becomes 0.016%. Keywords: Efficiency, Value Stream Mapping, Value Stream Analysis Tools

scholarly journals APPLY VALUE STREAM MAPPING TO “ETP ION DETECTTM” COMPANY

2020 ◽  
Vol 128 (5B) ◽  
pp. 51
Author(s):  
Hien Ton Nguyen Trong ◽  
Gareth Jones
Keyword(s):  
Material Flow ◽  
Lean Manufacturing ◽  
Value Stream Mapping ◽  
Flow Mapping ◽  
Value Stream ◽  
Work In Process ◽  
Current State ◽  
A Value ◽  
Production Value ◽  
Value Stream Map

<p><strong>Abstract: </strong>Value stream mapping (VSM) is a tool often applied in organisations working with lean in order to visualise and analyse production processes. By creating a value stream map, organisation can identify its main criticalities, look at both information &amp; material flow mapping in order to enhance lean manufacturing. Hence, the purpose of this work was to develop a value stream mapping for ETP Ion Detect Company (ETP) to demonstrate the possibilities of seeing sources of waste, shortening the lead-time, and reducing work-in-process inventory with the value stream mapping application.</p><p><strong>Key words</strong>: lean production, value stream mapping, current state map, future state map</p>

scholarly journals Application of value stream mapping to enhance productivity by reducing manufacturing lead time in a manufacturing company: A case study

2021 ◽  
Vol 19 (1) ◽  
pp. 11-22
Author(s):  
Aditya S. Patil ◽  
Mahesh V. Pisal ◽  
Chandrakant T. Suryavanshi
Keyword(s):  
Lead Time ◽  
Value Stream Mapping ◽  
Value Stream ◽  
Lead Time Reduction ◽  
Current State ◽  
Future State ◽  
Short Lead Time ◽  
Time Gap ◽  
Value Stream Map

Lead time is a time gap between initiation and completion of the processes or product. The lead time directly affects productivity. Short lead time results in higher output thus add more value in a given period. Value stream map is an effective tool to describe the overall process from order to delivery. In this study, there is lead time reduction by generation current state and future state for a process using various techniques. Thus, the main aim of this work to enhance production by reduction of lead time. Finally, gain in production, reduction in lead time, and reduction in inventory between the stations are also reported.

scholarly journals RANCANGAN USULAN PERBAIKAN UNTUK MEMINIMASI WAITING TIME PADA PROSES PRODUKSI RUBBER STEP ASPIRA BELAKANG DENGAN PENDEKATAN LEAN MANUFACTURING (STUDI KASUS: PT AGRONESIA DIVISI INDUSTRI TEKNIK KARET)

2016 ◽  
Vol 3 (02) ◽  
pp. 52
Author(s):  
Qolli Kusuma ◽  
Pratya Poeri Suryadhini ◽  
Mira Rahayu
Keyword(s):  
Waiting Time ◽  
Lean Manufacturing ◽  
Lead Time ◽  
Value Added ◽  
Value Stream Mapping ◽  
Value Stream ◽  
Current State ◽  
Fishbone Diagram

PT Agronesia (Divisi Industri Teknik Karet) merupakan perusahaan manufaktur industri pengolahan yang memproduksi berbagai jenis produk karet teknik untuk keperluan industri, salah satunya adalah rubber step. Penelitian ini difokuskan pada rubber step Aspira Belakang yang memiliki gap ketidaktercapaian produksi tertinggi. Pada proses produksi rubber step Aspira Belakang ditemukan waktu menunggu yang mempengaruhi tingkat pencapaian target produksi. Tahap awal dalam penelitian ini adalah dengan mengumpulkan data primer yang diolah untuk menggambarkan value stream mapping (VSM) dan process activity mapping (PAM) current state sehingga diketahui lead time dari proses produksi rubber step Aspira Belakang sebesar 5915.07 detik dengan waktu aktivitas value added sebesar 1131.47 detik atau 19.13% dari lead time. Tahap berikutnya adalah mengidentifikasi penyebab akar masalah waiting time menggunakan peta pekerja-mesin, fishbone diagram dan 5 why. Tahap selanjutnya adalah melakukan analisis 5W1H untuk memaparkan detail masalah dan menentukan rancangan usulan perbaikan menggunakan metode lean manufacturing seperti Quick Changeover dan Display. Rancangan usulan perbaikan berupa perancangan alat potong, pembagian lot pengerjaan compound, pengadaan instruksi kerja, perancangan display, pembuatan batch/stock siap cetak, dan perancangan rak penyimpanan khusus sebagai upaya dalam meminimasi waiting time pada proses produksi rubber step Aspira Belakang. Berdasarkan rancangan usulan yang diberikan didapatkan lead time sebesar 3142.10 detik dengan waktu aktivitas value added sebesar 1131.47 detik atau 36.01% dari lead time.

Lean Manufacturing Implementation Through Value Stream Mapping: A Case Study

2014 ◽  
Vol 68 (3) ◽  
Author(s):  
Seyed Mojib Zahraee ◽  
Ahmad Hashemi ◽  
Ahmed Ali Abdi ◽  
Ataollah Shahpanah ◽  
Jafri Mohd Rohani
Keyword(s):  
Business Strategy ◽  
Production Line ◽  
Lean Manufacturing ◽  
Lead Time ◽  
Value Added ◽  
Secondary Data ◽  
Value Stream Mapping ◽  
Total Production ◽  
Value Stream ◽  
Value Stream Map

Lean Manufacturing (LM) is a business strategy that was developed in Japan. The main contribution of lean manufacturing is the identification and elimination of waste. Companies apply LM to sustain their competitiveness over their competitors by improving the manufacturing system’s productivity and quality enhancement of the product. The goal of this paper is to apply one of the most significant lean manufacturing techniques called Value Stream Mapping (VSM) to improve the production line of a company that produces several components for vehicle assembly line by decreasing the waste and non-value added activities.  First, the current value stream map of production line was developed using personal interviews, observations and secondary data of the company. Subsequently, the future value stream map was proposed based on the lean manufacturing principles to improve total production lead time and value added time. Based on the final result it can be concluded that VSM is a useful and applicable approach that can help managers conceptualize the different kind of wastes and defects. Final result showed that the production lead time and value added time improved up to nearly 80 % and 12 % respectively by eliminating the wastes based on lean principles and VMS method. 

scholarly journals Improving Quality Control Process Through Value Stream Mapping

2018 ◽  
Vol 7 (2.29) ◽  
pp. 219
Author(s):  
Zulfa Fitri Ikatrinasari ◽  
Dan Kosasih
Keyword(s):  
Quality Control ◽  
Lead Time ◽  
Value Added ◽  
Maximum Efficiency ◽  
Value Stream Mapping ◽  
Process Time ◽  
Value Stream ◽  
Current State ◽  
Future State ◽  
Quality Control Process

PT. AEMI is one of the growing electronic component manufacturing company. By this time, Kaizen project has been run and managed to become a culture in PT AEMI. However, the project has not integrated, comprehensive and not yet has a long-term goals. Implementation of value stream mapping (VSM) in PT AEMI is expected to make Kaizen projects more focused and to produce increasing of the maximum efficiency. In addition, VSM Kaizen is believed to make the those programs more integrated, effective and comprehensive. This study aims to: (1) create a current state mapping in the Department of Quality Control PT. AEMI, (2) identify wastes in the Department of Quality Control PT.AEMI, (3) create a future state mapping at the Department of Quality Control PT. AEMI, (4) make a plan of improvement and analyzing the application. Stages of the study were as follows: (1) identification of work processes, (2) collect and analysis of work process time, (3) analysis of the current state mapping, (4) calculate of lead time and process time, (5) analysis of value added and non value-added activities, (6) analysis of wastes, (7) make a plan of future state mapping, (8) improvement design (improvement planning), (9) implementation of improvement, (10) analysis of the implementation of improvements. The results of this study are: 1) current state mapping at QC Department shows that the total lead time of 848 minutes where there is non-value added activity of 778 minutes. 2) identify waste on the handling process where the product movement from assembly to QC for 2 minutes, movement transactions from assembly to QC for 479 minutes and the waiting time at  inspection area for 727 minutes. 3) future state mapping at QC Department shows that the total lead time of 516.5 minutes where there is non-value added activity of 446.5 minutes. 4) the improvement to do is to change the lay out where final inspection is moved from QC to manufacturing so as to result in reduce of non-value added activity by 46%. 

scholarly journals Variability and Uncertainty Analysis in Value Stream Mapping

2019 ◽  
Vol 8 (12S2) ◽  
pp. 533-538
Keyword(s):  
Lean Manufacturing ◽  
Value Stream Mapping ◽  
Strong Impact ◽  
Food Sector ◽  
Value Stream ◽  
Current State ◽  
Potential Risks ◽  
Tools And Techniques ◽  
A Current

Lately, value stream mapping (VSM) is integrated with tools and techniques that belong to other areas of knowledge such as risk management (RM). It is well known tool in showing the value, value stream and the flow which represents three of lean manufacturing (LM) principles. This integration, gives more benefit in covering two of VSM issues such as considering the variability and uncertainty of production processes. In this paper, a model named variable value stream mapping (V-VSM) that integrates the two was showed, explained and tested. The model helps to generate the VSM in a dynamic way with the identification of current and potential risks. These risks might happen in the future bringing a strong impact on not reaching the main objectives in the defined time and cost. The model has been tested by conducting a case study in food sector. A current state map was built using both models, traditional VSM and VVSM. The results showed the effect of variability and uncertainty on the total cycle time (CT) and lead time (LT) values, where the traditional VSM failed to show it by being a static tool. Comparing the results of both models show the differences in presenting the real state of manufacturing environment..

scholarly journals ANALISIS PEMBOROSAN PRODUKSI PADA ALIRAN PRODUK JALA IKAN KKP MENGGUNAKAN PRINSIP LEAN MANUFACTURING DENGAN METODE VALUE STREAM MAPPING (VSM) DI PT. INDONEPTUNE NET MANUFACTURING

2019 ◽  
Vol 7 (2) ◽  
pp. 79-89
Author(s):  
Henny Henny ◽  
Muhammad Kahfi Hadi Syuhada
Keyword(s):  
Cycle Time ◽  
Delay Time ◽  
Lean Manufacturing ◽  
Value Stream Mapping ◽  
Time Level ◽  
Value Stream ◽  
Current State

  Penelitian ini ditujukan untuk menganalisis pemborosan produksi produk Jala Ikan KKP menggunakan lean manufacturing di PT. Indoneptune Net Manufacturing dengan memetakan aliran produksi dan menganalisisnya menggunakan value stream mapping (VSM). Analisis terhadap pemborosan dengan metode VSM dilakukan karena VSM dapat memetakan aliran informasi dan material dari awal sampai akhir dari value stream pembuatan suatu produk. Sehingga dapat dilihat proses mana saja yang merupakan pemborosan. Adapun VSM yang dibuat adalah current-state VSM karena dapat merepresentasikan kondisi saat ini dari aliran produksi yang ada. Hasil yang didapatkan setelah dibuat current-state VSM adalah aliran produksi produk jala Ikan KKP melewati proses spinning, ring roupe, netting dan finishing yang memiliki sub-sub proses yang berbeda. Dari setiap sub-proses tersebut dipetakan nama proses, jumlah waktu cycle time dan changeover time, level inventory, waktu kerja tersedia dan jumlah operator. Penganalisisan pemborosan dilakukan pada setiap sub-proses untuk dapat mengetahui nilai tambah proses tersebut terhadap produk utama yang sedang dikerjakan pada setiap tahapan proses yang berlangsung. Kesimpulan yang didapat yaitu pemborosan yang terjadi di departemen spinning salah satunya adalah delay time karena persiapan sebelum proses peleburan, waktu tunggu karena persiapan proses twist di departemen ring roupe, transportasi berlebih sebelum proses tatekan dan pengerjaan ulang di hoshu 2 di departemen finishing.

Sign in / Sign up

Export Citation Format

Share Document