Research and Application of Special Shaped Muffler Structure

2014 ◽  
Vol 1008-1009 ◽  
pp. 1387-1392
Author(s):  
Chi Zhang ◽  
Nan Xu ◽  
Zhe Zhang ◽  
Su Shan Zhang
Keyword(s):  
Transmission Loss ◽  
Low Frequency ◽  
Aerodynamic Performance ◽  
Frequency Noise ◽  
Noise Band ◽  
Low Frequency Noise ◽  
Acoustic Attenuation ◽  
Derivatives Of

The special-shaped silencing sheet and its derivatives of folded plate and expansion muffler structure, improve the acoustic attenuation performance in low frequency. The technical difficulties how dissipative silencer can effectively control the low frequency noise, is solved, the noise band of dissipative silencer is broadened, transmission loss increases, aerodynamic performance is optimized.

scholarly journals Development of a Slit-Type Soundproof Panel for a Reduction in Wind Load and Low-Frequency Noise with Helmholtz Resonators

2021 ◽  
Vol 11 (18) ◽  
pp. 8678
Author(s):  
Byunghui Kim ◽  
Seokho Kim ◽  
Yejin Park ◽  
Marinus Mieremet ◽  
Heungguen Yang ◽  
...  
Keyword(s):  
Transmission Loss ◽  
Numerical Study ◽  
Shape Change ◽  
Low Frequency ◽  
Helmholtz Resonator ◽  
Wind Load ◽  
Frequency Noise ◽  
Low Frequency Noise ◽  
Helmholtz Resonators ◽  
Commercial Program

With the rapid increase in automobiles, the importance of reducing low-frequency noise is being emphasized for a comfortable urban environment. Helmholtz resonators are widely used to attenuate low-frequency noise over a narrow range. In this study, a slit-type soundproof panel is designed to achieve low-frequency noise attenuation in the range of 500 Hz to 1000 Hz with the characteristics of a Helmholtz resonator and the ability to pass air through the slits on the panel surface for reducing wind load. The basic dimension of the soundproof panel is determined using the classical formula and numerical analysis using a commercial program, COMSOL Multiphysics, for transmission loss prediction. From the numerical study, it is identified that the transmission loss performance is improved compared to the basic design according to the shape change and configuration method of the Helmholtz resonator. Although the correlation according to the shape change and configuration method cannot be derived, it is confirmed that it can be used as an effective method for deriving a soundproof panel design that satisfies the basic performance.

Broadband low-frequency noise reduction using Helmholtz resonator-based metamaterial

2021 ◽  
Vol 69 (4) ◽  
pp. 351-363
Author(s):  
Jhalu Gorain ◽  
Chandramouli Padmanabhan
Keyword(s):  
Transmission Loss ◽  
Low Frequency ◽  
Helmholtz Resonator ◽  
Broadband Noise ◽  
Unit Cell ◽  
Frequency Noise ◽  
Noise Attenuation ◽  
Low Frequency Noise ◽  
Low Frequencies ◽  
Pu Foam

Achieving broadband noise attenuation at low frequencies is still a significant challenge. Helmholtz resonators offer good low-frequency noise attenuation but are effective only over a narrow band; the cavity volume required at these frequencies is also larger. This article proposes a new broadband acoustic metamaterial (AMM) absorber, which uses polyurethane (PU) foam embedded with small-size resonators tuned to different frequencies. The AMM design is achieved in three phases: (1) develop a transfer-matrix-based one-dimensionalmodel for a resonator with intruded neck; (2) use this model to develop a novel band broadeningmethod, to select appropriate resonators tuned to different frequencies; and (3) construct a unit cell metamaterial embedded with an array of resonators into PU foam. A small-size resonator tuned to 415 Hz is modified, by varying the intrusion lengths of the neck, to achieve natural frequencies ranging from 210 to 415 Hz. Using the band broadening methodology, 1 unit cell metamaterial is constructed; its effectiveness is demonstrated by testing in an acoustic impedance tube. The broadband attenuation characteristics of the constructed unit cell metamaterial are shown to match well with the predicted results. To demonstrate further the effectiveness of the idea, a metamaterial is formed using 4 periodic unit cells and is tested in a twin room reverberation chamber. The transmission loss is shown to improve significantly, at low frequencies, due to the inclusion of the resonators.

scholarly journals Effect of Cavity Structure on Acoustic Characteristics of Phononic Crystals Based on Double-Layer Plates

Crystals ◽  
2020 ◽  
Vol 10 (11) ◽  
pp. 995
Author(s):  
Chuanmin Chen ◽  
Zhaofeng Guo ◽  
Songtao Liu ◽  
Hongda Feng ◽  
Chuanxi Qiao
Keyword(s):  
Noise Reduction ◽  
Band Gap ◽  
Double Layer ◽  
Transmission Loss ◽  
Low Frequency ◽  
Phononic Crystals ◽  
Frequency Noise ◽  
Structural Factors ◽  
Low Frequency Noise ◽  
Cavity Structure

Localized resonance phononic crystals (LRPCs) are increasingly attracting scientists’ attention in the field of low-frequency noise reduction because of the excellent subwavelength band gap characteristics in the low-frequency band. However, the LRPCs have always had the disadvantage that the noise reduction band is too narrow. In this paper, in order to solve this problem, LRPCs based on double-layer plates with cavity structures are designed. First, the energy bands of phononic crystals plate with different thicknesses were calculated by the finite element method (FEM). At the same time, the mechanism of band gap generation was analyzed in combination with the modalities. Additionally, the influence of structure on the sound transmission loss (STL) of the phononic crystals plate and the phononic crystals cavity plates were analyzed, which indicates that the phononic crystals cavity plates have notable characteristics and advantages. Moreover, this study reveals a unique ”cavity cave” pattern in the STL diagram for the phononic crystals cavity plates, and it was analyzed. Finally, the influence of structural factors on the band structure and STL of phononic crystals cavity plates are summarized, and the theoretical basis and method guidance for the study of phononic crystals cavity plates are provided. New ideas are also provided for the future design and research of phononic crystals plate along with potential applications in low-frequency noise reduction.

scholarly journals Reduction of Low-Frequency Vessel Noise in Monterey Bay National Marine Sanctuary During the COVID-19 Pandemic

2021 ◽  
Vol 8 ◽  
Author(s):  
John P. Ryan ◽  
John E. Joseph ◽  
Tetyana Margolina ◽  
Leila T. Hatch ◽  
Alyson Azzara ◽  
...  
Keyword(s):  
Transmission Loss ◽  
Low Frequency ◽  
Large Vessel ◽  
Identification System ◽  
Frequency Noise ◽  
Monterey Bay ◽  
Low Frequency Noise ◽  
Marine Animals ◽  
Vessel Noise ◽  
Large Vessels

Low-frequency sound from large vessels is a major, global source of ocean noise that can interfere with acoustic communication for a variety of marine animals. Changes in vessel activity provide opportunities to quantify relationships between vessel traffic levels and soundscape conditions in biologically important habitats. Using continuous deep-sea (890 m) recordings acquired ∼20 km (closest point of approach) from offshore shipping lanes, we observed reduction of low-frequency noise within Monterey Bay National Marine Sanctuary (California, United States) associated with changes in vessel traffic during the onset of the COVID-19 pandemic. Acoustic modeling shows that the recording site receives low-frequency vessel noise primarily from the regional shipping lanes rather than via the Sound Fixing and Ranging (SOFAR) channel. Monthly geometric means and percentiles of spectrum levels in the one-third octave band centered at 63 Hz during 2020 were compared with those from the same months of 2018–2019. Spectrum levels were persistently and significantly lower during February through July 2020, although a partial rebound in ambient noise levels was indicated by July. Mean spectrum levels during 2020 were more than 1 dB re 1 μPa2 Hz–1 below those of a previous year during 4 months. The lowest spectrum levels, in June 2020, were as much as 1.9 (mean) and 2.4 (25% exceedance level) dB re 1 μPa2 Hz–1 below levels of previous years. Spectrum levels during 2020 were significantly correlated with large-vessel total gross tonnage derived from economic data, summed across all California ports (r = 0.81, p < 0.05; adjusted r2 = 0.58). They were more highly correlated with regional presence of large vessels, quantified from Automatic Identification System (AIS) vessel tracking data weighted according to vessel speed and modeled acoustic transmission loss (r = 0.92, p < 0.01; adjusted r2 = 0.81). Within the 3-year study period, February–June 2020 exhibited persistently quiet low-frequency noise and anomalously low statewide port activity and regional large-vessel presence. The results illustrate the ephemeral nature of noise pollution by documenting how it responds rapidly to changes in offshore large-vessel traffic, and how this anthropogenic imprint reaches habitat remote from major ports and shipping lanes.

Multi-tonal low frequency noise control using Helmholtz resonators with complex cavity designs for aircraft cabin noise improvement

2021 ◽  
Vol 263 (2) ◽  
pp. 3975-3986
Author(s):  
Tenon Charly Kone ◽  
Sebastian Ghinet ◽  
Raymond Panneton ◽  
Thomas Dupont ◽  
Anant Grewal
Keyword(s):  
Noise Control ◽  
Transmission Loss ◽  
Low Frequency ◽  
Helmholtz Resonator ◽  
Sound Insulation ◽  
Frequency Noise ◽  
Low Frequency Noise ◽  
Low Frequencies ◽  
Helmholtz Resonators ◽  
Resonance Frequencies

The noise control at multiple tonal frequencies simultaneously, in the low frequency range, is a challenge for aerospace, ground transportation and building industries. In the past few decades, various low frequency noise control solutions based on acoustic metamaterial designs have been presented in the literature. These solutions showed promising performance and are considered a better alternative to conventional sound insulation materials. In the present investigation, it was noticed that subdividing the cavity of a Helmholtz resonator allowed the control of multi-tonal noise at several resonance frequencies simultaneously and a shift of the resonance peaks towards the low frequencies. This paper proposes concepts of Helmholtz resonators with subdivided cavities to improve the sound transmission loss (STL) performance and simultaneously control the noise at several tonal frequencies. HRs with cylindrical shaped cavities were embedded in a layer of porous material. The STL of the metamaterial noise insulation configuration was predicted using serial and parallel assemblies of transfer matrices (TMM) incorporating a thermo-viscous-acoustic approach to accurately account for the viscous and thermal losses of acoustic wave propagation within the metamaterial. The STL calculated using the proposed TMM approach were observed to be in excellent agreement with the finite element method (FEM) numerical results.

Estimating the Quality of Thermionic Cathodes for Microwave Vacuum Tubes Using the Low-Frequency Noise Parameters

Vestnik MEI ◽  
2018 ◽  
Vol 5 (5) ◽  
pp. 120-127
Author(s):  
Mikhail D. Vorobyev ◽  
◽  
Dmitriy N. Yudaev ◽  
Andrey Yu. Zorin ◽  
◽  
...  
Keyword(s):  
Low Frequency ◽  
Frequency Noise ◽  
Low Frequency Noise ◽  
Noise Parameters ◽  
Thermionic Cathodes ◽  
Vacuum Tubes
Sign in / Sign up

Export Citation Format

Share Document