Crack Initiation and Progressive Damage of Three Gorges Granite

2010 ◽  
Vol 146-147 ◽  
pp. 1227-1232
Author(s):  
Ze Qi Zhu ◽  
Qian Sheng ◽  
Yong Hui Zhang ◽  
Xian Lun Leng
Keyword(s):  
Crack Initiation ◽  
Triaxial Compression ◽  
Damage Model ◽  
Elliptic Crack ◽  
Progressive Damage ◽  
Three Gorges ◽  
Compression Tests ◽  
Crack Initiation Stress ◽  
Stress Changes ◽  
Initiation Stress

Based on the uniaxial and triaxial compression tests of Three Gorges granites，the crack initiation stress under different confining pressures can be obtained by studying the crack strain curves. The results show that the crack initiation stress changes at the same extent with confining pressure, and is generally located between 25% and 50% of the peak strength. Moreover, the crack initiation criteria and progressive damage model are established, and some beneficial conclusions are drawn. The tension concentration model of elliptic crack can be used to explain cracking mechanism of Three Gorges granite at relatively low confinement, and Three Gorges granite mainly occurs lateral damage in the microfracturing process and exhibits the similar damage evolutionary rule under different confining stress. The damage model can be used to describe the crack propagation process.

scholarly journals Discrete Element Modeling of Crack Initiation Stress of Marble Based on Griffith’s Strength Theory

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Suifeng Wang ◽  
Fei Tan ◽  
Minglong You ◽  
Yu-Yong Jiao ◽  
Fubin Tu
Keyword(s):  
Crack Initiation ◽  
Particle Flow Code ◽  
Biaxial Compression ◽  
Discrete Element Modeling ◽  
Compression Tests ◽  
Strength Theory ◽  
Evolution Law ◽  
Crack Initiation Stress ◽  
Damage Process ◽  
Initiation Stress

Investigating the crack initiation stress of rocks is vital for understanding the gradual damage process of rocks and the evolution law of internal cracks. In this paper, the particle flow code method is used to conduct biaxial compression tests on a marble model with an elliptical crack under different confining pressures. According to the evolution status of microcracks in the rock during compression, four characteristic stresses are defined to reflect the gradual damage process of the marble. Two different methods are used to obtain crack initiation stress of rocks, and the calculation results are compared with those based on Griffith’s strength theory to verify the accuracy of this theory under compressive stress. Based on the numerical simulation results, the evolution law for the strength parameters of marble with the degree of damage is described. According to the proportional relationship between the peak stress and crack initiation stress, a new method for predicting the initiation stress is proposed, whose effectiveness is verified. Overall, the results of this study can serve as a useful guide for solving the important problems of slab cracking and rockburst encountered in underground space engineering.

Analysis of the Approaches to Determine Crack Initiation Stress of Rock Materials in Compression Tests

2014 ◽  
Vol 556-562 ◽  
pp. 2857-2861 ◽  
Author(s):  
Peng Fei Li ◽  
Qing Chi Cai
Keyword(s):  
Crack Initiation ◽  
Lower Limit ◽  
Physical Meaning ◽  
Strength Parameter ◽  
Compression Tests ◽  
Crack Initiation Stress ◽  
Stress Threshold ◽  
Similarities And Differences ◽  
Initiation Stress ◽  
Characteristic Stress

As a strength parameter less dependent on loading conditions, crack initiation stress is suggested to be used as a lower limit for spalling strength. So far, no suggested methods are given by the ISRM to determine crack initiation stress. In order to understand the physical meaning of the various methods and determine this characteristic stress threshold accurately, we compared the similarities and differences between these methods and then analyzed their applicable scope. It is suggested that a comprehensive consideration be taken to select an appropriate method to identify the crack initiation of rocks in compression.

scholarly journals Effects of Flaw Geometry on the Fracturing Behavior of Rock-Like Materials Containing Two Arch-Like Parallelogram Flaws

2020 ◽  
Vol 2020 ◽  
pp. 1-15
Author(s):  
Longqing Shi ◽  
Dongjing Xu
Keyword(s):  
Crack Initiation ◽  
Coal Mining ◽  
Failure Modes ◽  
Compression Tests ◽  
Underground Engineering ◽  
Crack Initiation Stress ◽  
Fracture Evolution ◽  
Fracturing Process ◽  
Inclination Angles ◽  
Initiation Stress

To increase understanding of the strength and failure mechanism of rocks with arch-like fractures generated in the overlying strata above a gob during coal mining, a series of uniaxial compression tests on rock-like specimens containing two preexisting parallelogram flaws at inclination angles varying from 45° to 75° were made using a rock mechanics servocontrolled testing system. Based on the experimental results, the effects of the inclination angles of two flaws having the same area on the mechanical parameters and fracturing process of the specimens were analyzed in detail. By adopting photographic monitoring, the crack initiation, propagation, coalescence, and failure modes in rock-like specimens were observed and characterized. The crack initiation stress and the second initiation stress were distinctly related to the flaw inclination angles, although the crack initiation stress presented a change trend generally similar to that of the crack second initiation stress with increasing flaw angle. Four modes of ultimate macroscopic failure morphology and the crack coalescence and failure modes of three types could be summarized. The research reported here could provide some theoretical support for the arch-like fracture evolution in the overburden during the excavation in underground engineering, especially in coal mining engineering.

scholarly journals Experimental Investigation and Micromechanical Modeling of Elastoplastic Damage Behavior of Sandstone

Materials ◽  
2020 ◽  
Vol 13 (15) ◽  
pp. 3414
Author(s):  
Chaojun Jia ◽  
Qiang Zhang ◽  
Susheng Wang
Keyword(s):  
Damage Evolution ◽  
Triaxial Compression ◽  
Damage Model ◽  
Confining Pressure ◽  
Micromechanical Modeling ◽  
Compression Tests ◽  
Integration Algorithm ◽  
Damage Behavior ◽  
Plastic Strain Increment ◽  
Elastoplastic Damage

The mechanical behavior of the sandstone at the dam site is important to the stability of the hydropower station to be built in Southwest China. A series of triaxial compression tests under different confining pressures were conducted in the laboratory. The critical stresses were determined and the relationship between the critical stress and confining pressure were analyzed. The Young’s modulus increases non-linearly with the confining pressure while the plastic strain increment Nϕ and the dilation angle ϕ showed a negative response. Scanning electron microscope (SEM) tests showed that the failure of the sandstone under compression is a coupled process of crack growth and frictional sliding. Based on the experimental results, a coupled elastoplastic damage model was proposed within the irreversible thermodynamic framework. The plastic deformation and damage evolution were described by using the micromechanical homogenization method. The plastic flow is inherently driven by the damage evolution. Furthermore, a numerical integration algorithm was developed to simulate the coupled elastoplastic damage behavior of sandstone. The main inelastic properties of the sandstone were well captured. The model will be implemented into the finite element method (FEM) to estimate the excavation damaged zones (EDZs) which can provide a reference for the design and construction of such a huge hydropower project.

Failure Stress in Notched Paper Sheets

2013 ◽  
Vol 569-570 ◽  
pp. 417-424
Author(s):  
Carlos A. Mora Santos ◽  
Orlando Susarrey Huerta ◽  
Vicente Flores Lara ◽  
Jorge Bedolla Hernández ◽  
Maribel A. Mendoza Nuñez
Keyword(s):  
Crack Initiation ◽  
The Self ◽  
Stress Theory ◽  
Crack Initiation Stress ◽  
Notched Specimens ◽  
Random Array ◽  
Crack Mechanics ◽  
Theoretical Stress ◽  
Initiation Stress ◽  
Circular Notch

In this work the crack initiation stress of notched specimens of filter paper is studied. The paper in the microstructure has a random array in their fibers while macroscopically it behaves anisotropically. The self-affine crack mechanics is used to study the size effect in the tensile behavior of this kind of paper under the presence of several conditions of geometrical notches. While in the traditional fracture mechanics the crack initiation stress is a material parameter when is reached a critical level at the crack tip, in the self-affine crack mechanics, depends moreover of the resulting tortuosity of the crack. Four geometrical arrangements in two sizes we considered: centered circular notch, centered lineal notch, sided circular notches and without notch at 10 and 300 mm width with a relation 2a/w = 0.25 under the same loading conditions. In this, the without notch specimens present the higher stress, all other notched specimens presented a similar crack initiation stress about 1 % of difference among them, and the crack growth is not affected by the geometry of notch. In spite of this difference, no one of the specimens reach the theoretical stress concentration of 3 such as predicted the classical stress theory.

Sign in / Sign up

Export Citation Format

Share Document