Performance Study of Hybrid Solid Oxide Fuel Cell–Gas Turbine Power System

2010 ◽  
Vol 171-172 ◽  
pp. 319-322
Author(s):  
Hong Bin Zhao ◽  
Xu Liu
Keyword(s):  
Fuel Cell ◽  
Solid Oxide Fuel Cell ◽  
Gas Turbine ◽  
Hybrid System ◽  
Cell Model ◽  
Research Work ◽  
Atmospheric Condition ◽  
Operating Conditions ◽  
Solid Oxide ◽  
Oxide Fuel

The simulation and analyses of a “bottoming cycle” solid oxide fuel cell–gas turbine (SOFC–GT) hybrid system at the standard atmospheric condition is presented in this paper. The fuel cell model used in this research work is based on a tubular Siemens–Westinghouse–type SOFC with 1.8MW capacity. Energy and exergy analyses of the whole system at fixed conditions are carried out. Then, comparisons of the exergy destruction and exergy efficiency of each component are also conducted to determine the potential capability of the hybrid system to generate power. Moreover, the effects of operating conditions including fuel flow rate and SOFC operating temperature on performances of the hybrid system are analyzed.

Design and Performance Study of a Solid Oxide Fuel Cell and Gas Turbine Hybrid System Applied in Combined Cooling, Heating, and Power System

2012 ◽  
Vol 138 (4) ◽  
pp. 205-214 ◽  
Author(s):  
Hsiao-Wei D. Chiang ◽  
Chih-Neng Hsu ◽  
Wu-Bin Huang ◽  
Chien-Hsiung Lee ◽  
Wei-Ping Huang ◽  
...  
Keyword(s):  
Fuel Cell ◽  
Power System ◽  
Solid Oxide Fuel Cell ◽  
Gas Turbine ◽  
Hybrid System ◽  
Solid Oxide ◽  
Oxide Fuel ◽  
Performance Study ◽  
And Performance ◽  
Combined Cooling

System Configuration and Performance Studies of Solid Oxide Fuel Cell -Gas Turbine Hybrid Cycle

2007 ◽  
Author(s):  
Wei Jiang ◽  
Ruxian Fang ◽  
Jamil A. Khan ◽  
Roger A. Dougal
Keyword(s):  
Fuel Cell ◽  
Power Plant ◽  
Solid Oxide Fuel Cell ◽  
Gas Turbine ◽  
Finite Volume ◽  
Hybrid System ◽  
High Energy ◽  
Solid Oxide ◽  
Oxide Fuel ◽  
Hybrid Cycle

Fuel Cell is widely regarded as a potential alternative in the electric utility due to its distinct advantages of high energy conversion efficiency, low environmental impact and flexible uses of fuel types. In this paper we demonstrate the enhancement of thermal efficiency and power density of the power plant system by incorporating a hybrid cycle of Solid Oxide Fuel Cell (SOFC) and gas turbine with appropriate configurations. In this paper, a hybrid system composed of SOFC, gas turbine, compressor and high temperature heat exchanger is developed and simulated in the Virtual Test Bed (VTB) computational environment. The one-dimensional tubular SOFC model is based on the electrochemical and thermal modeling, accounting for the voltage losses and temperature dynamics. The single cell is discretized using a finite volume method where all the governing equations are solved for each finite volume. Simulation results show that the SOFC-GT hybrid system could achieve a 70% total electrical efficiency (LHV) and an electrical power output of 853KW, around 30% of which is produced by the power turbine. Two conventional power plant systems, i.e. gas turbine recuperative cycle and pure Fuel Cell power cycle, are also simulated for the performance comparison to validate the improved performance of Fuel Cell/Gas Turbine hybrid system. Finally, the dynamic behavior of the hybrid system is presented and analyzed based on the system simulation.

Internal Reforming Solid Oxide Fuel Cell Gas Turbine Combined Cycles (IRSOFC-GT): Part B — Exergy and Thermoeconomic Analyses

2001 ◽  
Author(s):  
Aristide F. Massardo ◽  
Loredana Magistri
Keyword(s):  
Fuel Cell ◽  
Solid Oxide Fuel Cell ◽  
Gas Turbine ◽  
Operating Conditions ◽  
Solid Oxide ◽  
Specific Work ◽  
Oxide Fuel ◽  
Internal Reforming ◽  
System Pressure ◽  
Combined Cycles

The aim of this work is to investigate the performance of Internal Reforming Solid Oxide Fuel Cell (IRSOFC) and Gas Turbine (GT) combined cycles. A mathematical model of the IRSOFC steady-state operation was presented in Part A of this work (Massardo and Lubelli, 1998), coupled to the thermodynamic analysis of a number of proposed IRSOFC-GT combined cycles, taking into account the influence of several technological constraints. In the second part of this work, both an exergy and a thermoeconomic analysis of the proposed cycles have been carried out using the TEMP code developed by the Author (Agazzani and Massardo, 1997). A suitable equation for IRSOFC cost evaluation based on cell geometry and performance has been proposed and employed to evaluate the electricity generation cost of the proposed combined systems. The results are presented and the influence of several parameters is discussed: external reformer operating conditions, fuel to air ratio, cell current density, compressor pressure ratio, etc. Diagrams proposed by the Author (Massardo and Scialo’, 2000) for cost vs. efficiency, cost vs. specific work, and cost vs. system pressure are also presented and discussed.

Safety Analysis of a Solid Oxide Fuel Cell/Gas Turbine Hybrid System Fueled With Gasified Biomass

2015 ◽  
Vol 12 (1) ◽  
Author(s):  
Xiaojing Lv ◽  
Chaohao Lu ◽  
Xinjian Zhu ◽  
Yiwu Weng
Keyword(s):  
Fuel Cell ◽  
Solid Oxide Fuel Cell ◽  
Gas Turbine ◽  
Hybrid System ◽  
Safety Performance ◽  
Solid Oxide ◽  
The Other ◽  
Inlet Temperature ◽  
Oxide Fuel ◽  
Compressor Surge

The effect of biomass gas on the safety performance of a solid oxide fuel cell (SOFC)/micro gas turbine (GT) hybrid system was studied with consideration of the fuel cell working temperature, fuel cell temperature gradient requirement, compressor surge zone, and turbine inlet temperature (TIT). The safety performance of the hybrid system on the design condition and off-design condition was also analyzed. Results show that the hybrid system is good adaptability to low concentrations of biomass gas. The electrical efficiency could reach 50% with different biomass gases and is higher than the other combined power systems that used biomass gas. The wood chip gas (WCG) would make the fuel cell or GT easier overheat than the other three gases. The cotton wood gas (CWG) and corn stalk gas (CSG) are easy to cause the TIT too low or the compressor surge. In the safety zone, considering the hybrid system load adjustment range, the effecting order (from large to small, following is same) is WCG, grape seed gas (GSG), CSG, and CWG. Considering the hybrid system electric efficiency, the effecting order is WCG, GSG, CWG, and CSG.

Sign in / Sign up

Export Citation Format

Share Document