Isolation from Tannery Wastewater and Characterization of Bacterial Strain Involved in Nonionic Surfactant Degradation

2011 ◽  
Vol 183-185 ◽  
pp. 22-26 ◽  
Author(s):  
Bing Hua Yan ◽  
Hai Jun Yang ◽  
Jian Hong Wei ◽  
Lin Luo

A bacterial strain OPQa3 capable of utilizing nonylphenol polyoxyethylene (NPnEO) as sole carbon source was isolated from water samples collected from tannery waste treatment plant suffered long-time application of NPnEO by enrichment method. It was preliminarily identified as Brevundimonas sp. (most similar to Brevundimonas diminuta (EU434566.1)), according to the observation of morphological characteristics, physiological-biochemical tests and the similarity analysis of its 16S rDNA gene sequence. Inoculated 2% of OPQa3 suspension, to give a final OD600of approximately 0.70, to inorganic salt medium in which the initial concentration of NPnEO was 746 mg•L-1, degradation test showed that, the degradation rate of strain OPQa3 was 84.5% within 120 hours, the optimum temperature was 30°C while the optimum pH value was about 7, and the growth period was of 24 hours.

2018 ◽  
Vol 73 ◽  
pp. 07017 ◽  
Author(s):  
Arief Budihardjo Mochamad ◽  
Hadiwidodo Mochtar ◽  
Huboyo Haryono Setiyo ◽  
Aulia Felita Rahma

Leachate is generated during the decomposition process of solid waste and as a result of rainwater percolation through piles of garbage. Leachate composition is influenced by several factors such as the characteristic and density of solid waste, the amount of rainfall and the specific conditions of the disposal site. Once leachate reaches the surrounding soil and groundwater, high concentrations of organic substances will form and remain in the soil and groundwater for a long time. The well-known Indonesian Diponegoro University has built an integrated solid waste treatment plant (ISWTP) to manage the waste generated on site, which is mostly dominated by leaf litter, food waste, paper, and plastic. Organic solid waste goes through a decomposition process and produces leachate. In order to treat the leachate, it is necessary to identify its parameters. Thus, this study examines the effect of solid waste composition and density on leachate quality based on the conditions of the ISWTP. The results showed that the composition of solid waste altered the leachate quality while the density affected the decomposition rate and quantity of leachate.


2018 ◽  
Vol 2 (1) ◽  
pp. 1-7 ◽  
Author(s):  
Tee L. Guidotti

On 16 October 1996, a malfunction at the Swan Hills Special Waste Treatment Center (SHSWTC) in Alberta, Canada, released an undetermined quantity of persistent organic pollutants (POPs) into the atmosphere, including polychlorinated biphenyls, dioxins, and furans. The circumstances of exposure are detailed in Part 1, Background and Policy Issues. An ecologically based, staged health risk assessment was conducted in two parts with two levels of government as sponsors. The first, called the Swan Hills Study, is described in Part 2. A subsequent evaluation, described here in Part 3, was undertaken by Health Canada and focused exclusively on Aboriginal residents in three communities living near the lake, downwind, and downstream of the SHSWTC of the area. It was designed to isolate effects on members living a more traditional Aboriginal lifestyle. Aboriginal communities place great cultural emphasis on access to traditional lands and derive both cultural and health benefits from “country foods” such as venison (deer meat) and local fish. The suspicion of contamination of traditional lands and the food supply made risk management exceptionally difficult in this situation. The conclusion of both the Swan Hills and Lesser Slave Lake studies was that although POPs had entered the ecosystem, no effect could be demonstrated on human exposure or health outcome attributable to the incident. However, the value of this case study is in the detail of the process, not the ultimate dimensions of risk. The findings of the Lesser Slave Lake Study have not been published previously and are incomplete.


1988 ◽  
Vol 20 (11-12) ◽  
pp. 131-136 ◽  
Author(s):  
A. D. Wong ◽  
C. D. Goldsmith

The effect of discharging specific oil degrading bacteria from a chemostat to a refinery activated sludge process was determined biokinetically. Plant data for the kinetic evaluation of the waste treatment plant was collected before and during treatment. During treatment, the 500 gallon chemostatic growth chamber was operated on an eight hour hydraulic retention time, at a neutral pH, and was fed a mixture of refinery wastewater and simple sugars. The biokinetic constants k (days−1), Ks (mg/L), and K (L/mg-day) were determined before and after treatment by Monod and Lineweaver-Burk plots. Solids discharged and effluent organic concentrations were also evaluated against the mean cell retention time (MCRT). The maximum utilization rate, k, was found to increase from 0.47 to 0.95 days−1 during the operation of the chemostat. Subsequently, Ks increased from 141 to 556 mg/L. Effluent solids were shown to increase slightly with treatment. However, this was acceptable due to the polishing pond and the benefit of increased ability to accept shock loads of oily wastewater. The reason for the increased suspended solids in the effluent was most likely due to the continual addition of bacteria in exponential growth that were capable of responding to excess substrate. The effect of the chemostatic addition of specific microbial inocula to the refinery waste treatment plant has been to improve the overall organic removal capacity along with subsequent gains in plant stability.


1994 ◽  
Vol 29 (8) ◽  
pp. 235-250 ◽  
Author(s):  
Norbert Amsoneit

As a rule, hazardous waste needs a pre-treatment, either a thermal or a chemical-physical one, before it can be disposed of at a landfill. The concentration of different kinds of treatment facilities at a Centralized Hazardous Waste Treatment Plant is advantageous. The facility of the ZVSMM at Schwabach is presented as an outstanding example of this kind of Treatment Centre. The infrastructure, the chemical-physical plant with separate lines for the treatment of organic and inorganic waste and the hazardous waste incinerator are described. Their functions are discussed in detail. Emphasis is laid on handling the residues produced by the different treatment processes and the final disposal.


2018 ◽  
Vol 171 ◽  
pp. 1006-1019 ◽  
Author(s):  
Esmeralda Neri ◽  
Fabrizio Passarini ◽  
Daniele Cespi ◽  
Federica Zoffoli ◽  
Ivano Vassura

Sign in / Sign up

Export Citation Format

Share Document