Application Studies of Fuzzy Control on Adding Medicament in Circulating Water Treatment

2012 ◽  
Vol 466-467 ◽  
pp. 328-331
Author(s):  
Xin Li Chi ◽  
Sheng Lin ◽  
Xi Chang Han ◽  
Da Ren Wang
Keyword(s):  
Fuzzy Control ◽  
Power Plants ◽  
Fuzzy Inference ◽  
Control Method ◽  
Water System ◽  
Circulating Water ◽  
Fuzzy Input ◽  
Actual Operation ◽  
Pure Delay ◽  
Circulating Water System

Considering the control problem of circulating water system in the power plants with pure delay, inertia, and sensitivity to the environmental temperature, this paper applies the fuzzy algorithm to adding medicament control in circulating water system. The main procedure of fuzzy control algorithm consists of fuzzification, fuzzy inference and defuzzification. The fuzzy input and output variables are chosen as seven classes. Then, according to the actual operation situations and the expert experiences, the fuzzy rules are determined in the form of table. The effectiveness of the proposed fuzzy control method is proved by some practical examples.

Analysis on Circulating Water Heat Utilization Technology in Thermal Power Plants

2013 ◽  
Vol 753-755 ◽  
pp. 2727-2730
Author(s):  
Jian Tao Liu ◽  
Xiao Cheng Ma ◽  
Kun Kun You ◽  
Jian Xing Ren ◽  
Yong Wen Yang
Keyword(s):  
Power Unit ◽  
Heat Pump ◽  
Power Plants ◽  
Waste Heat ◽  
Thermal Power ◽  
Water System ◽  
Water Source ◽  
Circulating Water ◽  
Heat Utilization ◽  
Circulating Water System

The thermal power unit is the major unit in Chinas power supply. Circulating water has large low-temperature waste-heat which can be recycled. The principles of water source heat pump technology is analyzed, characteristic of circulating water system in thermal power unit is studied. Then two kinds of connection methods between circulating water system and water source heat pump (WSHP) are presented.

scholarly journals A scale removal and scale absorption method for circulating water system

2021 ◽  
Vol 676 (1) ◽  
pp. 012099
Author(s):  
Yao Yang ◽  
Xiaona Li ◽  
Xiang Li ◽  
Yuchao Li ◽  
Tianqi Meng ◽  
...  
Keyword(s):  
Water System ◽  
Absorption Method ◽  
Scale Removal ◽  
Circulating Water ◽  
Circulating Water System

Effect of heat flushing on the concentrations of Legionella pneumophila and other heterotrophic microbes in hot water systems of apartment buildings

1996 ◽  
Vol 42 (8) ◽  
pp. 811-818 ◽  
Author(s):  
Outi M. Zacheus ◽  
Pertti J. Martikainen
Keyword(s):  
Water Temperature ◽  
Legionella Pneumophila ◽  
Heterotrophic Bacteria ◽  
Water System ◽  
Water Systems ◽  
Hot Water ◽  
Circulating Water ◽  
Heterotrophic Microbes ◽  
Before And After ◽  
Circulating Water System

The decontamination of Legionella pneumophila and other heterotrophic microbes by heat flushing in four legionellae-positive hot water systems was studied. Before the decontamination procedure, the concentration of legionellae varied from 3.0 × 10−3 to 3.5 × 10−5 cfu/L and the hot water temperature from 43.6 to 51.5 °C. During the contamination the temperature was raised to 60–70 °C. All taps and showers were cleaned from sediments and flushed with hot water twice a day for several minutes. The decontamination lasted for 2–4 weeks. In a few weeks the heat-flushing method reduced the concentration of legionellae below the detection limit (50 cfu/L) in the hot circulating water system just before and after the heat exchanger. The high hot water temperature also decreased the viable counts of heterotrophic bacteria, fungi, and total microbial cells determined by the epifluorescent microscopy. However, the eradication of legionellae failed in a water system where the water temperature remained below 60 °C in some parts of the system. After the decontamination, the temperature of hot water was lowered to 55 °C. Thereafter, all the studied hot water systems were recolonized by legionellae within a few months, showing that the decontamination by heat flushing was temporary. Also, the contamination of other bacteria increased in a few months to the level before decontamination.Key words: legionellae, hot water system, decontamination, water temperature, heterotrophic bacteria.

The Pressure Loss Alarm System of Circulating Water in Calcium Carbide Furnace

2013 ◽  
Vol 401-403 ◽  
pp. 1144-1148
Author(s):  
Fen Su Shi ◽  
Yang Zhou ◽  
Yong Wu
Keyword(s):  
Real Time ◽  
Pressure Loss ◽  
Water System ◽  
Calcium Carbide ◽  
Alarm System ◽  
Monitoring Methods ◽  
Field Bus ◽  
Circulating Water ◽  
Automation And Control ◽  
Circulating Water System

In order to improve the manual monitoring methods of the circulating water in calcium carbide furnace, this paper designs a pressure loss alarm system about circulating water of calcium carbide furnace. The system completes real-time automation and control of circulating water system by combining PLC technology, field bus communication technology and configuration technology, which uses PROFIBUS field bus to communicate between upper computer and lower computer. The practical application shows that this system can effectively achieve real-time monitoring of the circulating water, fault diagnosis and maintenance management.

Laboratory Investigation of Water-Side Scale And Corrosion in the Presence Of High Process-Side Temperatures

CORROSION ◽  
1960 ◽  
Vol 16 (10) ◽  
pp. 523t-529t ◽  
Author(s):  
HERMAN KERST
Keyword(s):  
Calcium Phosphate ◽  
Water System ◽  
Laboratory Method ◽  
Circulating Water ◽  
Corrosion Rates ◽  
Combination Treatments ◽  
Water Side ◽  
Circulating Water System ◽  
Skin Temperatures ◽  
Scale Deposition

Abstract A laboratory method of testing water-side corrosion and scale deposition in the presence of high process side temperatures has been developed. Two types of specimens are used: (1) a hairpin of ¼ inch seamless steel tubing mounted on a pipe plug and inserted in the circulating water system, and (2) a miniature heat exchanger made of ½ inch seamless tubing and standard pipe parts. In studies on corrosion rates, and on calcium phosphate scale deposition under conditions of 130 F water temperature and 350–395 F hot-side temperatures, it was shown that corrosion rates may be increased up to 8 times over the rates on immersed coupons at 130 F. A possible method of calculating water-side skin temperatures is indicated. It was shown that the use of polyphosphate treatments, at residual levels high enough to give corrosion protection, leads to the deposition of calcium phosphate scale. The use of chromate in combination treatments reduces the amount of this scale deposited, and also appears to reduce the amount of carbonate scale. 4.6.1

Failure of Circulating Water Pumps Discharge Header Cross Connect Valve — Optimum Solutions

2014 ◽  
Author(s):  
Mohammed Alismail
Keyword(s):  
Sea Water ◽  
Water System ◽  
Normal Operation ◽  
Problem Analysis ◽  
Circulating Water ◽  
Root Cause ◽  
Maintenance Work ◽  
Circulating Water System ◽  
Water Pumps ◽  
Cross Connect

The circulating water system is a very important system in Ghazlan Steam Power Plant- 4276 MW, as it supplies the sea water to the tubes side of the Condensers during normal operation. A large butterfly cross-connect valve was installed at the circulating water pumps discharge header to isolate the pumps and the header for maintenance. A forced unit shutdown occurred due to valve’s shafts end leakage and collapse after maintenance work. This paper explains the wrong design location of the valve in the piping as the root cause of the problem. Analysis with ASME reference will be presented. This paper will also present potential solutions and actions taken as a lesson learned to avoid occurrence in other plants.

Sign in / Sign up

Export Citation Format

Share Document