A Review of Nanostructured TiO2 Application in Li-Ion Batteries

2013 ◽  
Vol 750-752 ◽  
pp. 301-306 ◽  
Author(s):  
Jiang Wei ◽  
Jian Xiong Liu ◽  
Yu Chun Dang ◽  
Kun Xu ◽  
Yi Zhou
Keyword(s):  
Electron Transfer ◽  
Energy Density ◽  
Lithium Ion ◽  
High Energy ◽  
High Energy Density ◽  
Future Research ◽  
Li Ion Batteries ◽  
Diffusion Distance ◽  
Li Ion ◽  
Insertion Sites

TiO2has large potential ability in Lithium-ion batteries due to its high energy density and safety. The main reasons that limit the performance of TiO2electrode is its low real capacity which caused by poor conductivity and other factors. Varying bulk TiO2materials to nanoscale is believed a promising method as it could increase Li insertion sites, short the ions diffusion distance and enhance the kinetics. In addition, doping heterogeneous elements or compositing other conductivity materials could enable TiO2to improve electron transfer ability. In this paper, we reviewed the electrochemical performance of some nanostructured TiO2and analyzed the merits and weaknesses. Some challenges and perspectives for future research were also discussed.

Enabling Stable and High-Rate Cycling of Ni-Rich Layered Oxide Cathode for Lithium-Ion Batteries by Modification with an Artificial Li+-Conducting Cathode-Electrolyte Interphase

2021 ◽  
Author(s):  
Shixuan Wang ◽  
Alvin Dai ◽  
Yuliang Cao ◽  
Han Xi Yang ◽  
Khalil Amine ◽  
...  
Keyword(s):  
Energy Density ◽  
Thermal Instability ◽  
Lithium Ion ◽  
High Energy ◽  
High Rate ◽  
High Energy Density ◽  
Li Ion Batteries ◽  
Oxide Cathode ◽  
Li Ion ◽  
Long Life

Ni-rich LiNi0.8Co0.1Mn0.1O2 (NCM811) cathodes are investigated to realize high energy density Li ion batteries for long life electric vehicle applications. However, capacity decay and thermal instability due to cathode-electrolyte interfacial...

scholarly journals Operando Raman analysis of electrolyte changes in Li-ion batteries with hollow-core optical fibre sensors

2021 ◽  
Author(s):  
Ermanno Miele ◽  
Wesley Dose ◽  
Ilya Manyakin ◽  
Michael Frosz ◽  
Michael De Volder ◽  
...  
Keyword(s):  
Energy Density ◽  
Optical Fibre ◽  
Lithium Ion ◽  
High Energy ◽  
High Energy Density ◽  
Energy Storage Materials ◽  
Solvation Dynamics ◽  
Li Ion Batteries ◽  
Hollow Core ◽  
Li Ion

Abstract New methods are urgently required to identify degradation and failure mechanisms in high energy density energy storage materials such as Ni-rich LiNi0.8Mn0.1Co0.1O2 cathodes (NMC811) for Li-ion batteries. Understanding and ultimately avoiding these mechanisms requires in-situ tracking of the complex electrochemical processes that occur in different parts of battery cells. Here we demonstrate a new operando spectroscopy method that enables the tracking of electrolyte chemistry, applied here for high energy density Li-ion batteries with a NMC811 cathode, during electrochemical cycling. This is achieved by embedding a novel hollow-core optical fibre probe inside the battery to monitor the evolution of electrolyte species by background-free Raman spectroscopy. Our data reveals changes in the ratio of carbonate solvents and electrolyte additives as a function of the cell voltage, as well as changes in the lithium-ion solvation dynamics. This advanced operando methodology delivers a new way to study battery degradation mechanisms, and the understanding it develops should contribute to extending the lifetime of next-generation batteries.

New high-energy-density GeTe-based anodes for Li-ion batteries

2019 ◽  
Vol 7 (7) ◽  
pp. 3278-3288 ◽  
Author(s):  
Ki-Hun Nam ◽  
Geon-Kyu Sung ◽  
Jeong-Hee Choi ◽  
Jong-Sang Youn ◽  
Ki-Joon Jeon ◽  
...  
Keyword(s):  
Solid State ◽  
Energy Density ◽  
Lithium Ion Batteries ◽  
Lithium Ion ◽  
High Energy ◽  
High Energy Density ◽  
Li Ion Batteries ◽  
Electrochemical Behaviors ◽  
Germanium Telluride ◽  
Li Ion

A layered germanium telluride (GeTe) and its C-modified nanocomposite (GeTe–C) are synthesized by a simple solid-state synthesis technique, and their electrochemical behaviors for rechargeable lithium-ion batteries (LIBs) are evaluated.

scholarly journals A Review of Pulsed Current Technique for Lithium-ion Batteries

Energies ◽  
2020 ◽  
Vol 13 (10) ◽  
pp. 2458 ◽  
Author(s):  
Xinrong Huang ◽  
Yuanyuan Li ◽  
Anirudh Budnar Acharya ◽  
Xin Sui ◽  
Jinhao Meng ◽  
...  
Keyword(s):  
Lithium Ion ◽  
High Energy ◽  
High Energy Density ◽  
Impact Factors ◽  
Future Research ◽  
Pulsed Current ◽  
Li Ion Batteries ◽  
Li Ion ◽  
Discharging Capacity ◽  
The Impact

Lithium-ion (Li-ion) batteries have been competitive in Electric Vehicles (EVs) due to their high energy density and long lifetime. However, there are still issues, which have to be solved, related to the fast-charging capability of EVs. The pulsed current charging technique is expected to improve the lifetime, charging speed, charging/discharging capacity, and the temperature rising of Li-ion batteries. However, the impact of the pulsed current parameters (i.e., frequency, duty cycle, and magnitude) on characteristics of Li-ion batteries has not been fully understood yet. This paper summarizes the existing pulsed current modes, which are positive Pulsed Current Mode (PPC) and its five extended modes, and Negative Pulsed Current (NPC) mode and its three extended modes. An overview of the impact of pulsed current techniques on the performance of Li-ion batteries is presented. Then the main impact factors of the PPC strategy and the NPC strategy are analyzed and discussed. The weight of these impact factors on lifetime, charging speed, charging/discharging capacity, and the temperature rising of batteries is presented, which provides guidance to design advanced charging/discharging strategies as well as to determine future research gaps.

A dual-functional gel-polymer electrolyte for lithium ion batteries with superior rate and safety performances

2017 ◽  
Vol 5 (35) ◽  
pp. 18888-18895 ◽  
Author(s):  
Xilin Li ◽  
Kun Qian ◽  
Yan-Bing He ◽  
Cheng Liu ◽  
Decheng An ◽  
...  
Keyword(s):  
Energy Density ◽  
Lithium Ion Batteries ◽  
Polymer Electrolyte ◽  
Gel Polymer Electrolyte ◽  
Lithium Ion ◽  
High Energy ◽  
High Energy Density ◽  
Li Ion Batteries ◽  
Dual Functional ◽  
Li Ion

An attractive approach to fabricate high energy density and safe Li-ion batteries was proposed by utilizing a pentaerythritol tetraacrylate-based gel-polymer electrolyte.

Optimized electron occupancy of solid-solution transition metals for suppressing the oxygen evolution of Li2MnO3

2021 ◽  
Vol 9 (14) ◽  
pp. 9337-9346
Author(s):  
Erhong Song ◽  
Yifan Hu ◽  
Ruguang Ma ◽  
Yining Li ◽  
Xiaolin Zhao ◽  
...  
Keyword(s):  
Solid Solution ◽  
Energy Density ◽  
Transition Metals ◽  
Oxygen Evolution ◽  
High Energy ◽  
High Energy Density ◽  
Li Ion Batteries ◽  
Li Ion ◽  
Increasing Demand ◽  
Layered Cathodes

Li-rich layered cathodes based on Li2MnO3 have exhibited extraordinary promise to satisfy the rapidly increasing demand for high-energy density Li-ion batteries.

Novel low-cost, high-energy-density (>700 Wh kg−1) Li-rich organic cathodes for Li-ion batteries

2021 ◽  
Vol 415 ◽  
pp. 128509
Author(s):  
Qihang Yu ◽  
Wu Tang ◽  
Yang Hu ◽  
Jian Gao ◽  
Ming Wang ◽  
...  
Keyword(s):  
Energy Density ◽  
Low Cost ◽  
High Energy ◽  
High Energy Density ◽  
Li Ion Batteries ◽  
Li Ion

Accordion-like stretchable Li-ion batteries with high energy density

2019 ◽  
Vol 17 ◽  
pp. 136-142 ◽  
Author(s):  
Changmin Shi ◽  
Tianyang Wang ◽  
Xiangbiao Liao ◽  
Boyu Qie ◽  
Pengfei Yang ◽  
...  
Keyword(s):  
Energy Density ◽  
High Energy ◽  
High Energy Density ◽  
Li Ion Batteries ◽  
Li Ion

Design and Realization of an Intelligent Protection Circuit for Li-Ion Batteries

2011 ◽  
Vol 282-283 ◽  
pp. 82-85
Author(s):  
Xiao Peng Ji ◽  
Xing Feng Guan ◽  
Zhen Hong Wang
Keyword(s):  
Energy Density ◽  
Circuit Design ◽  
Theoretical Basis ◽  
Safety Concern ◽  
High Energy ◽  
High Energy Density ◽  
Li Ion Batteries ◽  
Safety Protection ◽  
Li Ion ◽  
Protection Circuit

Li-ion batteries have been widely used. However, the safety concern is always serious due to its high energy density. In order to improve the safety of the batteries, it is necessary to use the protection integration circuit. In this article, the concept for realizing the safety protection of Li-ion batteries during charging and discharging is described briefly. A circuit design using Seiko BMS chip S-8209 is purposed. Based on this, a simulation was performed and verified using Pspice program, which provides a theoretical basis for the circuit design.

Sign in / Sign up

Export Citation Format

Share Document