A Survey of External Feature of Solar Cells in Partially Shading

2013 ◽  
Vol 773 ◽  
pp. 108-112 ◽  
Author(s):  
Xue Song Zhou ◽  
Xue Bo Shen ◽  
You Jie Ma

Existing model of solar cells is not suitable for partial shading condition, which makes output current-voltage (I-V) curve of photovoltaic (PV) array staid-stepping. Furthermore, Power-Voltage (P-V) characteristics may exist more than two local peak value in partially shading which bring interferences to maximum power point tracking (MPPT). Based on modified engineering model of solar cells, an accurate model of array was proposed considering variation of shadows. And the I-V characteristic, P-V characteristic and yield of PV modules were analyzed. At last, the optimum output power with different shadows arrangement was discussed.

2021 ◽  
Vol 13 (5) ◽  
pp. 2656
Author(s):  
Ahmed G. Abo-Khalil ◽  
Walied Alharbi ◽  
Abdel-Rahman Al-Qawasmi ◽  
Mohammad Alobaid ◽  
Ibrahim M. Alarifi

This work presents an alternative to the conventional photovoltaic maximum power point tracking (MPPT) methods, by using an opposition-based learning firefly algorithm (OFA) that improves the performance of the Photovoltaic (PV) system both in the uniform irradiance changes and in partial shading conditions. The firefly algorithm is based on fireflies’ search for food, according to which individuals emit progressively more intense glows as they approach the objective, attracting the other fireflies. Therefore, the simulation of this behavior can be conducted by solving the objective function that is directly proportional to the distance from the desired result. To implement this algorithm in case of partial shading conditions, it was necessary to adjust the Firefly Algorithm (FA) parameters to fit the MPPT application. These parameters have been extensively tested, converging satisfactorily and guaranteeing to extract the global maximum power point (GMPP) in the cases of normal and partial shading conditions analyzed. The precise adjustment of the coefficients was made possible by visualizing the movement of the particles during the convergence process, while opposition-based learning (OBL) was used with FA to accelerate the convergence process by allowing the particle to move in the opposite direction. The proposed algorithm was simulated in the closest possible way to authentic operating conditions, and variable irradiance and partial shading conditions were implemented experimentally for a 60 [W] PV system. A two-stage PV grid-connected system was designed and deployed to validate the proposed algorithm. In addition, a comparison between the performance of the Perturbation and Observation (P&O) method and the proposed method was carried out to prove the effectiveness of this method over the conventional methods in tracking the GMPP.


Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2521
Author(s):  
Alfredo Gil-Velasco ◽  
Carlos Aguilar-Castillo

There are multiples conditions that lead to partial shading conditions (PSC) in photovoltaic systems (PV). Under these conditions, the harvested energy decreases in the PV system. The maximum power point tracking (MPPT) controller aims to harvest the greatest amount of energy even under partial shading conditions. The simplest available MPPT algorithms fail on PSC, whereas the complex ones are effective but require high computational resources and experience in this type of systems. This paper presents a new MPPT algorithm that is simple but effective in tracking the global maximum power point even in PSC. The simulation and experimental results show excellent performance of the proposed algorithm. Additionally, a comparison with a previously proposed algorithm is presented. The comparison shows that the proposal in this paper is faster in tracking the maximum power point than complex algorithms.


Author(s):  
Mohammed Asim ◽  
Piyush Agrawal ◽  
Mohd Tariq ◽  
Basem Alamri

Under partial shading conditions (PSC), most traditional maximum power point tracking (MPPT) techniques may not adopt GP (global peak). These strategies also often take a considerable amount of time to reach a full power point (MPP). Such obstacles can be eliminated by the use of metaheuristic strategies. This paper shows, in partial shading conditions, the MPPT technique for the photovoltaic system using the Bat Algorithm (BA). Simulations have been performed in the MATLAB ®/Simulink setting to verify the efficacy of the proposed method. In MPPT applications, the results of the simulations emphasize the precision of the proposed technique. The algorithm is also simple and efficient, on a low-cost microcontroller, it could be implemented. Hardwar in loop (HIL) validation is performed, with a Typhoon HIL 402 setup.


2020 ◽  
Vol 6 (51) ◽  
pp. eabd1580
Author(s):  
Xiaodong Li ◽  
Sheng Fu ◽  
Wenxiao Zhang ◽  
Shanzhe Ke ◽  
Weijie Song ◽  
...  

One big challenge for long-lived inverted perovskite solar cells (PSCs) is that commonly used metal electrodes react with perovskite layer, inducing electrode corrosion and device degradation. Motivated by the idea of metal anticorrosion, here, we propose a chemical anticorrosion strategy to fabricate stable inverted PSCs through introducing a typical organic corrosion inhibitor of benzotriazole (BTA) before Cu electrode deposition. BTA molecules chemically coordinate to the Cu electrode and form an insoluble and polymeric film of [BTA-Cu], suppressing the electrochemical corrosion and reaction between perovskite and the Cu electrode. PSCs with BTA/Cu show excellent air stability, retaining 92.8 ± 1.9% of initial efficiency after aging for 2500 hours. In addition, >90% of initial efficiency is retained after 85°C aging for over 1000 hours. PSCs with BTA/Cu also exhibit good operational stability, and 88.6 ± 2.6% of initial efficiency is retained after continuous maximum power point tracking for 1000 hours.


2016 ◽  
Vol 78 (6-2) ◽  
Author(s):  
Ammar Hussein Mutlag ◽  
Azah Mohamed ◽  
Hussain Shareef

In photovoltaic (PV) system, maximum power tracking (MPPT) is crucial to improve the system performance. Irradiance and temperature are the two important parameters that affect MPPT. The conventional perturbation and observation (P&O) based MPPT algorithm does not accurately track the PV maximum power point. Therefore, this paper presents an improved P&O algorithm (Im-P&O) based on variable perturbation. The idea behind the Im-P&O algorithm is to produce variable step changes in the reference current/voltage for fast tracking of the PV maximum power point. The Im-P&O based MPPT is designed for the 25 SolarTIFSTF-120P6 PV panels, with a capacity of 3 kW peak. A complete PV system is modeled using the MATLAB/Simulink. Simulation results showed that the Im-P&O based MPPT achieved faster and accurate performance compared with the conventional P&O algorithm.


Sign in / Sign up

Export Citation Format

Share Document