Effect of Formulation on Thermal Expansion Behavior of Bamboo/HDPE/PA6 Composites Using TMA

2013 ◽  
Vol 773 ◽  
pp. 502-507
Author(s):  
Run Zhou Huang ◽  
Xin Wu Xu ◽  
Cheng Jun Zhou ◽  
Yang Zhang ◽  
Qing Lin Wu
Keyword(s):  
Thermal Expansion ◽  
Coupling Agent ◽  
Thermal Expansion Behavior ◽  
Loading Level ◽  
Expansion Behavior ◽  
The Matrix

Bamboo/HDPE/PA6 composites have been discussed by systematically studying the effect of formulation on thermal expansion properties. PA6 filled HDPE seemed not significantly influence LTEC of HDPE/PA composites system when the PA loading level increased form 0 % to 20%. It was investigated that BF significantly reduced LTEC value compared with LTEC of HDPE/PA. The reduction of the LTEC appear in HDPE/bamboo composites was dependent on the matrix and filler. Coupling agent can make the LTEC of HDPE/bamboo composites reduced, but the reduction was larger than that of only filler.

Anomalous thermal expansion behaviors of wood under dry and low-temperature conditions

Holzforschung ◽  
2014 ◽  
Vol 68 (5) ◽  
pp. 567-574 ◽  
Author(s):  
Tsunehisa Miki ◽  
Hiroyuki Sugimoto ◽  
Yuzo Furuta ◽  
Ichinori Shigematsu ◽  
Kozo Kanayama
Keyword(s):  
Thermal Expansion ◽  
Linear Thermal Expansion ◽  
Longitudinal Direction ◽  
Mechanical Analysis ◽  
Solid Wood ◽  
Compression Pressure ◽  
Thermal Expansion Behavior ◽  
Expansion Behavior ◽  
Dry Conditions ◽  
Anomalous Thermal Expansion

Abstract The thermal expansion behavior of dry solid wood was investigated by dynamic dilatometry and thermal mechanical analysis. Anomalous thermal expansion behavior was observed concerning the displacement change under a constant compression pressure, which was not previously reported. Wood submitted to temperatures below 0°C under dry conditions exhibited a large increment in the linear thermal expansion coefficient (CLTE) and a sudden drop in the CLTE around 50°C as well as above 130°C during heating. In subsequent cooling/heating processes, these anomalous behaviors remained at temperatures below 100°C, although less pronounced, and disappeared at temperatures above 100°C. These behaviors were clearly perceptible in the radial and tangential directions but not in the longitudinal direction. The CLTE depended strongly on the heat and moisture history of the samples and the effects are species-specific.

Research on the thermal expansion behavior of anodic films on aluminium

1999 ◽  
Vol 346 (1-2) ◽  
pp. 280-283 ◽  
Author(s):  
Junbiao Zhou ◽  
Jiansheng Wu ◽  
Yuxing Yang
Keyword(s):  
Thermal Expansion ◽  
Anodic Films ◽  
Thermal Expansion Behavior ◽  
Expansion Behavior

Effect of MgO Grain Size on Thermal Expansion Behavior of Alumina-Magnesia-Carbon Refractory

2013 ◽  
Vol 11 (6) ◽  
pp. 1012-1019 ◽  
Author(s):  
Santanu Mukhopadhyay ◽  
Arup K. Chattopadhyay ◽  
Gopesh C. Das ◽  
Saikat Maitra
Keyword(s):  
Grain Size ◽  
Thermal Expansion ◽  
Thermal Expansion Behavior ◽  
Expansion Behavior

Thermal Expansion Behavior of Porous Rocks under Stress

1982 ◽  
pp. 173-183
Author(s):  
Roy F. Greenwald ◽  
Paul I. Ashqar ◽  
Wilbur H. Somerton
Keyword(s):  
Thermal Expansion ◽  
Porous Rocks ◽  
Thermal Expansion Behavior ◽  
Expansion Behavior

scholarly journals Preparation of NZP-Type Ca0.75 + 0.5xZr1.5Fe0.5(PO4)3 –x(SiO4)x Powders and Ceramic, Thermal Expansion Behavior

2018 ◽  
Vol 54 (12) ◽  
pp. 1267-1273 ◽  
Author(s):  
D. O. Savinykh ◽  
S. A. Khainakov ◽  
M. S. Boldin ◽  
A. I. Orlova ◽  
A. A. Aleksandrov ◽  
...  
Keyword(s):  
Thermal Expansion ◽  
Thermal Expansion Behavior ◽  
Expansion Behavior

scholarly journals On thermal expansion behavior of invar alloy fabricated by modulated laser powder bed fusion

2018 ◽  
Vol 160 ◽  
pp. 895-905 ◽  
Author(s):  
Hamed Asgari ◽  
Mehrnaz Salarian ◽  
Henry Ma ◽  
Adeola Olubamiji ◽  
Mihaela Vlasea
Keyword(s):  
Thermal Expansion ◽  
Invar Alloy ◽  
Powder Bed Fusion ◽  
Laser Powder Bed Fusion ◽  
Powder Bed ◽  
Thermal Expansion Behavior ◽  
Expansion Behavior
Sign in / Sign up

Export Citation Format

Share Document