Synthesis and Photoluminescence Properties of Novel SnO2 Zigzag Nanoribbons

2010 ◽  
Vol 97-101 ◽  
pp. 4213-4216
Author(s):  
Jian Xiong Liu ◽  
Zheng Yu Wu ◽  
Guo Wen Meng ◽  
Zhao Lin Zhan
Keyword(s):  
Electron Microscopy ◽  
Room Temperature ◽  
Vapour Deposition ◽  
Chemical Vapour ◽  
Photoluminescence Properties ◽  
X Ray Diffraction ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Ceramic Boat

Novel single-crystalline SnO2 zigzag nanoribbons have been successfully synthesized by chemical vapour deposition. Sn powder in a ceramic boat covered with Si plates was heated at 1100°C in a flowing argon atmosphere to get deposits on a Si wafers. The main part of deposits is SnO2 zigzag nanoribbons. They were characterized by means of X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM) and selected-area electron diffraction (SAED). SEM observations reveal that the SnO2 zigzag nanoribbons are almost uniform, with lengths near to several hundred micrometers and have a good periodically tuned microstructure as the same zigzag angle and growth directions. Possible growth mechanism of these zigzag nanoribbons was discussed. A room temperature PL spectrum of the zigzag nanoribbons shows three peaks at 373nm, 421nm and 477nm.The novel zigzag microstructures will provide a new candidate for potential application.

scholarly journals Oxalic Acid-Assisted Hydrothermal Synthesis and Luminescent of Hexagonal NaYF4:Ln3+ (Ln = Sm, Eu, Yb/Er) Micro/Nanoplates

2017 ◽  
Vol 2017 ◽  
pp. 1-10 ◽  
Author(s):  
Feng Tao ◽  
Zhishun Shen ◽  
Zhijun Wang ◽  
Da Shu ◽  
Qi Liu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Oxalic Acid ◽  
Molar Ratio ◽  
Photoluminescence Properties ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ph Values ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Display Systems

Hexagonal NaYF4:Ln3+ micro/nanoplates were successfully synthesized via a hydrothermal method using oxalic acid as a shape modifier. X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), and selected area electron diffraction (SAED) have been used to study the morphologies and crystal structure of the products. The effects of the pH values and the molar ratio of oxalic acid to NaOH on the crystal growth have been investigated in detail. The time-dependent experiments have been conducted to investigate the morphology evolution process, and based on the results, a possible growth mechanism was proposed. The photoluminescence properties of 5 mol% Eu3+ and 3 mol% Sm3+ doped NaYF4 and 20 mol% Yb3+/2 mol% Er3+ codoped NaYF4 micro/nanoplates were investigated. The experimental results showed that NaYF4:Ln3+ micro/nanoplates have excellent luminescence and can be potential application in the field of light display systems, lasers, and optoelectronic devices.

PHOTOLUMINESCENCE SPECTRA AND MAGNETIC PROPERTIES OF HYDROTHERMALLY SYNTHESIZED MnO2 NANORODS

2013 ◽  
Vol 27 (29) ◽  
pp. 1350211 ◽  
Author(s):  
ARBAB MOHAMMAD TOUFIQ ◽  
FENGPING WANG ◽  
QURAT-UL-AIN JAVED ◽  
QUANSHUI LI ◽  
YAN LI
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Room Temperature ◽  
Blue Emission ◽  
Green Emission ◽  
X Ray Diffraction ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Uv Emission ◽  
Transmission Electron

In this paper, single crystalline tetragonal MnO 2 nanorods have been synthesized by a simple hydrothermal method using MnSO 4⋅ H 2 O and Na 2 S 2 O 8 as precursors. The crystalline phase, morphology, particle sizes and component of the as-prepared nanomaterial were characterized by employing X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED) and energy-dispersive X-ray spectroscopy (EDS). The photoluminescence (PL) emission spectrum of MnO 2 nanorods at room temperature exhibited a strong ultraviolet (UV) emission band at 380 nm, a prominent blue emission peak at 453 nm as well as a weak defect related green emission at 553 nm. Magnetization (M) as a function of applied magnetic field (H) curve showed that MnO 2 nanowires exhibited a superparamagnetic behavior at room temperature which shows the promise of synthesized MnO 2 nanorods for applications in ferrofluids and the contrast agents for magnetic resonance imaging. The magnetization versus temperature curve of the as-obtained MnO 2 nanorods shows that the Néel transition temperature is 94 K.

New method for the production of bulk amorphous materials of Nd–Fe–B alloys

2005 ◽  
Vol 20 (3) ◽  
pp. 563-566 ◽  
Author(s):  
Tetsuji Saito ◽  
Hiroyuku Takeishi ◽  
Noboru Nakayama
Keyword(s):  
Electron Microscopy ◽  
Amorphous Materials ◽  
Room Temperature ◽  
Amorphous Structure ◽  
X Ray Diffraction ◽  
Bulk Materials ◽  
X Ray ◽  
Transmission Electron ◽  
Melt Spun ◽  
Melt Spun Ribbons

We report a new compression shearing method for the production of bulk amorphous materials. In this study, amorphous Nd–Fe–B melt-spun ribbons were successfully consolidated into bulk form at room temperature by the compression shearing method. X-ray diffraction and transmission electron microscopy studies revealed that the amorphous structure was well maintained in the bulk materials. The resultant bulk materials exhibited the same magnetic properties as the original amorphous Nd–Fe–B materials.

Characterisation of Chemical Vapour Deposited AlHfN Coatings

2020 ◽  
Vol 405 ◽  
pp. 33-39
Author(s):  
Elisabeth Rauchenwald ◽  
Mario Lessiak ◽  
Ronald Weissenbacher ◽  
Sabine Schwarz ◽  
Roland Haubner
Keyword(s):  
Electron Microscopy ◽  
Protective Coatings ◽  
Cutting Tools ◽  
Chemical Vapour ◽  
Gas Composition ◽  
X Ray Diffraction ◽  
Multilayer Systems ◽  
X Ray ◽  
Transmission Electron ◽  
Hcl Gas

Chemical vapour deposited HfN can be utilised as a component of multilayer systems in protective coatings on cutting tools. In this study, related AlHfN coatings were synthesized through a reaction of metallic hafnium and aluminium with HCl gas forming gaseous HfCl4 and AlCl3, which were subsequently transported into a heated coating reactor. Via high temperatures and separately introduced NH3 and N2 as reaction gases, AlHfN coatings were deposited on hardmetal inserts. By varying the ratio between AlCl3 and HfCl4, compositionally different AlHfN coatings were examined. Additionally, surface morphology, composition as well as crystalline phases of the obtained coatings were analysed by scanning electron microscopy, energy dispersive X-ray spectroscopy and X-ray diffraction. Finally, the microstructure of the cross section of a coating was investigated via transmission electron microscopy. The observations revealed a great impact of the gas composition on the morphology and crystal structures of the coatings. Within the layer, the growth of columnar microstructures was detected. Additionally, the formation of an amorphous HfN intermediate layer between the substrate and the AlHfN with a thickness of approximately 2 nm was found.

A Chemical Solution Route to Rapid Synthesis of Homogeneous Bi100−xSbx Alloys Nanoparticles at Room Temperature

2007 ◽  
Vol 7 (2) ◽  
pp. 525-529 ◽  
Author(s):  
Bo Zhou ◽  
Jun-Jie Zhu
Keyword(s):  
Room Temperature ◽  
Raw Materials ◽  
X Ray Diffraction ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Solution Route ◽  
Diffraction Patterns ◽  
Co Reduction ◽  
Chemical Solution Route

A chemical co-reduction route in aqueous solution was developed to synthesize Bi100−xSbx alloys at room temperature. The hydrolyses of Bi(III) and Sb(III) were effectively avoided by selecting proper raw materials and coordinator. X-ray diffraction analysis indicated that the as-prepared Bi100−xSbx alloys were homogeneous and phase-pure, and the Bi/Sb ratios in the alloys were very close to those in the aqueous solutions. The transmission electron microscope observation showed that the as-prepared Bi100−xSbx (x = 0∼100) alloys were particles with a size of tens of nanometers. The selected area electron diffraction patterns confirmed the high crystallinity, the homogeneousness, and the composition controllability of as-prepared alloys. All these characters and the nanometer-scaled size of the alloys are believed to be beneficial to the thermoelectric property of the Bi100−xSbx alloys.

Room Temperature Self-Annealing of Electroplated and Sputtered Copper Films

1999 ◽  
Vol 562 ◽  
Author(s):  
Michelle Chen ◽  
Suraj Rengarajan ◽  
Peter Hey ◽  
Yezdi Dordi ◽  
Hong Zhang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Room Temperature ◽  
Copper Film ◽  
Copper Films ◽  
Organic Additives ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Electroplated Copper ◽  
Effect Of Copper

ABSTRACTSelf-annealing properties of electroplated and sputtered copper films at room temperature were investigated in this study, in particular, the effect of copper film thickness, electrolyte systems used, as well as their level of organic additives for electroplating. Real-time grain growth was observed by transmission electron microscopy. Sheet resistance and X-ray diffraction measurements further confirmed the recrystallization of the electroplated copper film with time. The recrystallization of electroplated films was then compared with that of sputtered copper films.

scholarly journals A Novel X-Ray Radiation Sensor Based on Networked SnO2 Nanowires

2019 ◽  
Vol 9 (22) ◽  
pp. 4878 ◽  
Author(s):  
Jae-Hun Kim ◽  
Ali Mirzaei ◽  
Hyoun Woo Kim ◽  
Hong Joo Kim ◽  
Phan Quoc Vuong ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Room Temperature ◽  
Low Cost ◽  
X Rays ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Radiation Sensor ◽  
Sno2 Nanowires ◽  
Radiation Sensors

X-Ray radiation sensors that work at room temperature are in demand. In this study, a novel, low-cost real-time X-ray radiation sensor based on SnO2 nanowires (NWs) was designed and tested. Networked SnO2 NWs were produced via the vapor–liquid–solid technique. X-ray diffraction (XRD), transmission electron microscopy (TEM) and field emission scanning electron microscopy (SEM) analyses were used to explore the crystallinity and morphology of synthesized SnO2 NWs. The fabricated sensor was exposed to X-rays (80 kV, 0.0–2.00 mA) and the leakage current variations were recorded at room temperature. The SnO2 NWs sensor showed a high and relatively linear response with respect to the X-ray intensity. The X-ray sensing results show the potential of networked SnO2 NWs as novel X-ray sensors.

Effect of Au on the Performance of Porous Silicon/V2O5 Nanorods Heterojunctions to NO2 Gas

NANO ◽  
2016 ◽  
Vol 11 (07) ◽  
pp. 1650079 ◽  
Author(s):  
Wenjun Yan ◽  
Ming Hu ◽  
Jiran Liang ◽  
Dengfeng Wang ◽  
Yulong Wei ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Porous Silicon ◽  
Room Temperature ◽  
Au Nanoparticles ◽  
Analytical Techniques ◽  
Heating Process ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

A novel composite of Au-functionalized porous silicon (PS)/V2O5 nanorods (PS/V2O5:Au) was prepared to detect NO2 gas. PS/V2O5 nanorods were synthesized by a heating process of pure vanadium film on PS, and then the obtained PS/V2O5 nanorods were functionalized with dispersed Au nanoparticles. Various analytical techniques, such as field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), have been employed to investigate the properties of PS/V2O5:Au. Herein, the PS/V2O5:Au sample exhibited improved NO2-sensing performances in response, stability and selectivity at room temperature (25[Formula: see text]C), compared with the pure PS/V2O5 nanorods. These phenomena were closely related to not only the dispersed Au nanoparticles acting as a catalyst but also the p-n heterojunctions between PS and V2O5 nanorods. Whereas, more Au nanoparticles suppressed the improvement of response to NO2 gas.

On the destruction of kaolinite and gibbsite by phenylphosphonic, phenylphosphinic and phenylarsonic acids: evidence for the formation of new Al compounds

Clay Minerals ◽  
2004 ◽  
Vol 39 (4) ◽  
pp. 391-404 ◽  
Author(s):  
J. E. F. C. Gardolinski ◽  
G. Lagaly ◽  
M. Czank
Keyword(s):  
Electron Microscopy ◽  
Thermal Analysis ◽  
Transmission Electron Microscopy ◽  
Fourier Transform ◽  
Linear Chain ◽  
X Ray Diffraction ◽  
Phenylphosphonic Acid ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron

AbstractKaolinite and synthetic γ-Al(OH)3 (gibbsite or hydrargillite) were reacted with phenylphosphonic, phenylphosphinic and 2-nitrophenol-4-arsonic acids. The products were studied by powder X-ray diffraction, transmission electron microscopy/selected area electron diffraction/ energy dispersive X-ray/Fourier transform infrared and simultaneous thermogravimetric/differential thermal analysis. The acids were not intercalated but, instead, easily destroyed the structure of the minerals. Lamellar Al phenylphosphonate and aluminium phenylphosphinate and phenylarsonate with polymeric linear-chain structures were formed from kaolinite. The reaction between gibbsite and the same acids yielded almost identical products. No evidence of formation of grafted kaolinite derivatives after the reaction with phenylphosphonic acid was found.

Room Temperature Self-Annealing of Electroplated and Sputtered Copper Films

1999 ◽  
Vol 564 ◽  
Author(s):  
Michelle Chen ◽  
Suraj Rengarajan ◽  
Peter Hey ◽  
Yezdi Dordi ◽  
Hong Zhang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Room Temperature ◽  
Copper Film ◽  
Copper Films ◽  
Organic Additives ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Electroplated Copper ◽  
Effect Of Copper

AbstractSelf-annealing properties of electroplated and sputtered copper films at room temperature were investigated in this study, in particular, the effect of copper film thickness, electrolyte systems used, as well as their level of organic additives for electroplating. Real-time grain growth was observed by transmission electron microscopy. Sheet resistance and X-ray diffraction measurements further confirmed the recrystallization of the electroplated copper film with time. The recrystallization of electroplated films was then compared with that of sputtered copper films.

Sign in / Sign up

Export Citation Format

Share Document