Fluorescent AgNCs Formed on Bifunctional DNA Template for Potassium Ion Detection

In this study, we examined properties of silver nanoclusters, which are AgNCs stabilized by DNA oligonucleotide scaffold containing G-quadruplex-forming sequences: human telomeric (Tel22) or thrombin-binding aptamer (TBA). Thus, we obtained two fluorescent probes abbreviated as Tel22C12-AgNCs and TBAC12-AgNCs, which were characterized using absorption, circular dichroism and fluorescence spectroscopy. Both probes emit green and red fluorescence. The presence of silver nanoclusters did not destabilize the formed G-quadruplexes. The structural changes of probes upon binding K+ or Na+ ions cause quenching in their red emission. Green emission was slightly quenched only in the case of Tel22C12-AgNCs; on the contrary, for TBAC12-AgNC’s green emission, we observed an increasing fluorescence signal. Moreover, the Tel22C12-AgNCs system shows not only a higher binding preference for K+ over Na+, but it was able to monitor small changes in K+ concentrations in the buffer mimicking extracellular conditions (high content of Na+ ions). These results suggest that Tel22C12-AgNCs exhibit the potential to monitor transmembrane potassium transport.

Structural and Spectroscopic Effects of Li+ Substitution for Na+ in LixNa1-xCaGd0.5Ho0.05Yb0.45(MoO4)3 Scheelite-Type Upconversion Phosphors

A set of new triple molybdates, LixNa1-xCaGd0.5(MoO4)3:Ho3+0.05/Yb3+0.45, was successfully manufactured by the microwave-accompanied sol–gel-based process (MAS). Yellow molybdate phosphors LixNa1-xCaGd0.5(MoO4)3:Ho3+0.05/Yb3+0.45 with variation of the LixNa1-x (x = 0, 0.05, 0.1, 0.2, 0.3) ratio under constant doping amounts of Ho3+ = 0.05 and Yb3+ = 0.45 were obtained, and the effect of Li+ on their spectroscopic features was investigated. The crystal structures of LixNa1-xCaGd0.5(MoO4)3:Ho3+0.05/Yb3+0.45 (x = 0, 0.05, 0.1, 0.2, 0.3) at room temperature were determined in space group I41/a by Rietveld analysis. Pure NaCaGd0.5Ho0.05Yb0.45(MoO4)3 has a scheelite-type structure with cell parameters a = 5.2077 (2) and c = 11.3657 (5) Å, V = 308.24 (3) Å3, Z = 4. In Li-doped samples, big cation sites are occupied by a mixture of (Li,Na,Gd,Ho,Yb) ions, and this provides a linear cell volume decrease with increasing Li doping level. The evaluated upconversion (UC) behavior and Raman spectroscopic results of the phosphors are discussed in detail. Under excitation at 980 nm, the phosphors provide yellow color emission based on the 5S2/5F4 → 5I8 green emission and the 5F5 → 5I8 red emission. The incorporated Li+ ions gave rise to local symmetry distortion (LSD) around the cations in the substituted crystalline structure by the Ho3+ and Yb3+ ions, and they further affected the UC transition probabilities in triple molybdates LixNa1-xCaGd0.5(MoO4)3:Ho3+0.05/Yb3+0.45. The complex UC intensity dependence on the Li content is explained by the specificity of unit cell distortion in a disordered large ion system within the scheelite crystal structure. The Raman spectra of LixNa1-xCaGd0.5(MoO4)3 doped with Ho3+ and Yb3+ ions were totally superimposed with the luminescence signal of Ho3+ ions in the range of Mo–O stretching vibrations, and increasing the Li+ content resulted in a change in the Ho3+ multiplet intensity. The individual chromaticity points (ICP) for the LiNaCaGd(MoO4)3:Ho3+,Yb3+ phosphors correspond to the equal-energy point in the standard CIE (Commission Internationale de L’Eclairage) coordinates.

Highly Efficient and Thermally Stable Eu2+-Doped Ca9Nd(PO4)7 Phosphor for Near-Ultraviolet White-Emission LED Applications

Various Eu2+-based Ca9Nd(PO4)7 (CNP:xEu2+, with different x values) materials are prepared via facile solid-state reaction. Their crystal structures are investigated in detail by means of the Rietveld refinement. The structure of CNP:Eu2+ with a trigonal lattice is analogous to that of β-Ca3(PO4)2. Therefore, Eu2+ ions tend to incorporate calcium sites in the host. All the obtained samples can be excited using near ultraviolet (nUV) light to present blue-green emission. An optimal dopant concentration is verified at x = 0.8 with a large critical interaction radius (11.21 Å). The mechanism of the concentration quenching effect is assigned to the multipole-multipole interaction. CNP:xEu2+ possesses a short decay lifetime of ∼60 μs and can endure severe working conditions thanks to its great thermal stability. The relative photoluminescence (PL) intensity of CNP:0.8Eu2+ can retain 84.75% of the pristine intensity measured at room temperature, and the relative intensity remains as high as 69.97% at 423 K. The CNP:Eu2+ phosphors also show great performance in the WLED demonstration. The correlated color temperature (CCT) of the prototype device is 3404 K, with an extremely high Ra (97.6). Therefore, CNP:xEu2+ could be regarded as a promising alternative to blue green phosphors in nUV chip-based WLED applications.

Fluorescence Spectroscopy of Enantiomeric Amide Compounds Enforced by Chiral Light

Chirality, the absence of mirror symmetry, governs behavior in most biologically important molecules, thus making the chiral recognition of great importance in the pharmaceutical and agrochemical industries, as well as medicine. Chiral molecules can be characterized by means of optical experiments based on chiro-optical excitation of molecules. Specifically, chiral absorptive materials differently absorb left- and right-circular polarized light, i.e., they possess circular dichroism (CD). Unfortunately, the natural CD of most molecules is very low and lies in the ultraviolet range. Fluorescence-detected CD is a fast and sensitive tool for investigation of chiral molecules which emit light; ultralow CD in absorption can be detected as the difference in emission. In this work, we perform fluorescence-detected CD on novel chiral amide compounds, designed specifically for visible green emission; we synthesize two enantiomeric fluorescent compounds using low-cost starting compounds and easy purification. We investigate different solutions of the enantiomers at different concentrations, and we show that the fluorescence of the intrinsically chiral compounds depends on the polarization state of the penetrating light, which is absorbed at 400 nm and emits across the green wavelength range. We believe that these compounds can be coupled with plasmonic nanostructures, which further shows promise in applications regarding chiral sensing or chiral emission.

Improvement of the UV-Sensing Performance of Ga-Doped ZnO Nanostructures via a Wet Chemical Solution at Room Temperature

In this investigation, ultraviolet (UV) photodetectors (PDs) were fabricated from zinc oxide (ZnO) and Ga-doped ZnO nanostructures on a Corning glass substrate by a simple wet chemical solution method at room temperature. The prepared devices contained two-dimensional (2-D) nanosheet (NS) structures, which could provide a large surface-area-to-volume ratio for UV-sensing. The ZnO and Ga-doped ZnO materials were respectively named ZPD and ZPD-G. All of the samples revealed a hexagonal wurtzite structure and grew preferentially along the (002) crystal plane. Compared with the photoluminescence (PL) spectrum of the ZPD NSs, the corresponding spectra of the ZPD-G NSs in the 380 nm region and green emission were clearly red-shifted and the number of oxygen vacancies slightly decreased. Under 380 nm UV illumination and a 3 V applied bias, the ZnO UV PDs doped with Ga elements exhibited much higher photoresponsivity and stability compared with the un-doped ZnO PDs, indicating good electrical performance. The ZPD-G samples possessed higher rise and recovery times compared with the ZPD samples; this finding could be attributed to the ability of the former to generate numerous electrons.

Highly emissive MAPbBr3 perovskite QDs by ligand-assisted reprecipitation: the antisolvent effect

A systematic study of the synthetic procedure to improve quantum efficiency of luminescent hybrid perovskite QDs through ligand-assisted precipitation method is presented. Particularly, the influence of the dielectric constant and dipole moment of the antisolvent on the reaction time and the photophysical properties of the QDs is highlighted. After evaluating the influence of antisolvents and optimizing experimental parameters such as reaction time and Pb excess of the precursor, colloidal crystalline MAPbBr3 QDs with exceptionally high absolute quantum yield up to 97.7% in solution and 69.1% in solid film were obtained. Finally, MAPbBr3 QDs precipitated from anisole were processed like UV-curable nanocomposite as efficient down conversion layer resulting in very narrow green emission LED.

All-inorganic perovskite quantum dots-based electrospun polyacrylonitrile fiber for ultra-sensitive trace-recording

All-inorganic dual-phase CsPbBr3-Cs4PbBr6 quantum dots (CPB QDs)-based polyacrylonitrile (PAN) fiber synthesized by supersaturated recrystallization and electrospinning technique possesses characteristics of homogeneous morphology, high crystallinity and solution sensitivity. Under 365 nm laser excitation, CPB@PAN fiber exhibits surprising trace-recording capability attributing to the splash-enhanced fluorescence (FL) performance with a narrow-band emission at 477-515 nm. In the process of ethanol-anhydrous (EA) and water splashing, the CPB@PAN fiber presents conspicuous blue and green emission when contacting with EA and water, and maintains intense blue and green FL for more than 4 months. These experimental and theoretical findings provide a facile technology for the development of biological protection display, biotic detection and moisture-proof forewarning based on the trace-recording performance of CPB@PAN fiber.