Chemically Reacting Radiative MHD Jeffrey Nanofluid Flow over a Cone in Porous Medium

2015 ◽  
Vol 19 ◽  
pp. 75-90 ◽  
Author(s):  
Chakravarthula S.K. Raju ◽  
Macharla Jayachandra Babu ◽  
Naramgari Sandeep
Keyword(s):  
Differential Equations ◽  
Mass Transfer Rate ◽  
Dual Solutions ◽  
Nanofluid Flow ◽  
Shooting Technique ◽  
Non Linear ◽  
Jeffrey Nanofluid ◽  
Presence And Absence ◽  
Chemically Reacting ◽  
Layer Flow

The objective of this paper is to analyze the influence of thermal radiation and chemical reaction on the boundary layer flow of a magnetohydrodynamic Jeffrey nanofluid over a permeable cone in the presence of thermophoresis, Brownian motion effects. The set of non-linear governing partial differential equations are transformed into set of non-linear coupled ordinary differential equations by using self-suitable transformations, which are then solved numerically using Runge-Kutta fourth order along with shooting technique. The obtained results present the effects of various non-dimensional governing parameters on velocity, temperature and concentration profiles. Also, enumerated and analyzed the friction factor, local Nusselt and Sherwood numbers. We presented dual solutions in the presence and absence of the magneticfield and found an excellent agreement of the present results with the existed studies under some special limited cases. Result indicates that an increase in the buoyancy parameter increases the heat and mass transfer rate in the presence and absence of the transverse magneticfield and dual solutions exists only for certain range of magneticfield parameter.

Heat and Mass Transfer in MHD Eyring-Powell Nanofluid Flow due to Cone in Porous Medium

2015 ◽  
Vol 19 ◽  
pp. 57-74 ◽  
Author(s):  
Macharla Jayachandra Babu ◽  
Naramgari Sandeep ◽  
Chakravarthula S.K. Raju
Keyword(s):  
Differential Equations ◽  
Transfer Rate ◽  
Dual Solutions ◽  
Concentration Profiles ◽  
Nanofluid Flow ◽  
Shooting Technique ◽  
Injection Parameter ◽  
Buoyancy Forces ◽  
Suction Or Injection ◽  
Layer Flow

In this paper, we analyzed the thermophoresis and Brownian motion effects on the boundary layer flow of a magnetohydrodynamic Eyring-Powell nanofluid over a permeable cone in the presence of buoyancy forces and suction/injection effects. The governing partial differential equations are transformed into set of non-linear coupled ordinary differential equations by using self-suitable transformations, which are then solved numerically using Runge-Kutta fourth order along with shooting technique. The obtained results present the effects of various non-dimensional governing parameters on velocity, temperature and concentration profiles. Also, enumerated and analyzed the friction factor, local Nusselt and Sherwood numbers. We presented dual solutions for suction and injection cases and found an excellent agreement of the present results with the existed studies under some special limited cases. Result indicates that dual solutions are available only for particular range of suction or injection parameter and Eyring-Powell parameter have tendency to enhance the heat transfer rate.

scholarly journals Dual Solutions in the Boundary Layer Flow and Heat Transfer in the Presence of Thermal Radiation with Suction Effect

2018 ◽  
Vol 7 (4.33) ◽  
pp. 17
Author(s):  
Siti Nur Aisyah Azeman ◽  
. .
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Differential Equations ◽  
Thermal Radiation ◽  
Boundary Layer Flow ◽  
Numerical Solutions ◽  
Dual Solutions ◽  
Shooting Technique ◽  
Flow And Heat Transfer ◽  
Layer Flow

The dual solutions in the boundary layer flow and heat transfer in the presence of thermal radiation is quantitatively studied. The governing partial differential equations are derived into a system of ordinary differential equations using a similarity transformation, and afterward numerical solution obtained by a shooting technique. Dual solutions execute within a certain range of opposing and assisting flow which related to these numerical solutions. The similarity equations have two branches, upper or lower branch solutions, within a certain range of the mixed convection parameters. Further numerical results exist in our observations which enable to discuss the features of the respective solutions.  

Impact of Convective Boundary Condition on Heat and Mass Transfer of Nanofluid Flow Over a Thin Needle Filled with Carbon Nanotubes

2020 ◽  
Vol 9 (4) ◽  
pp. 282-292
Author(s):  
P. Sreedevi ◽  
P. Sudarsana Reddy
Keyword(s):  
Boundary Layer ◽  
Differential Equations ◽  
Convective Boundary Condition ◽  
Skin Friction Coefficient ◽  
Nanofluid Flow ◽  
Finite Element Scheme ◽  
Convective Boundary ◽  
Non Linear ◽  
Layer Flow ◽  
Linear Differential

In the current study, we have scrutinized the sway of non-linear thermal radiation and Biot number on boundary layer flow along a continuously moving thin needle filled with carbon based nanotubes by considering water as regular fluid. The main system of partial differential equations is first reduced to the system of ordinary non-linear differential equations with the help of similarity conversion technique. The transmuted boundary layer ordinary differential equations are answered numerically by implementing Finite element scheme. The influence of pertinent constraints involved on heat, hydro-dynamic and solutal boundary layers are analysed in depth and the outcomes are revealed through plots. Moreover, the effect of these parameters on the values of Sherwood number, Nusselt number and skin-friction coefficient is also inspected and the results are exposed through tables. It is seen that velocity sketches depreciates with improving values of size of the needle parameter.

Unsteady Flow and Heat Transfer of a MHD Micropolar Fluid Over a Porous Stretching Sheet in the Presence of Thermal Radiation

2013 ◽  
Vol 29 (3) ◽  
pp. 559-568 ◽  
Author(s):  
G. C. Shit ◽  
R. Haldar ◽  
A. Sinha
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Differential Equations ◽  
Thermal Radiation ◽  
Boundary Layer Flow ◽  
Micropolar Fluid ◽  
Stretching Sheet ◽  
Flow And Heat Transfer ◽  
Non Linear ◽  
Layer Flow

AbstractA non-linear analysis has been made to study the unsteady hydromagnetic boundary layer flow and heat transfer of a micropolar fluid over a stretching sheet embedded in a porous medium. The effects of thermal radiation in the boundary layer flow over a stretching sheet have also been investigated. The system of governing partial differential equations in the boundary layer have reduced to a system of non-linear ordinary differential equations using a suitable similarity transformation. The resulting non-linear coupled ordinary differential equations are solved numerically by using an implicit finite difference scheme. The numerical results concern with the axial velocity, micro-rotation component and temperature profiles as well as local skin-friction coefficient and the rate of heat transfer at the sheet. The study reveals that the unsteady parameter S has an increasing effect on the flow and heat transfer characteristics.

Thermally and chemically reacted MHD Maxwell nanofluid flow past an inclined permeable stretching surface

2021 ◽  
pp. 095440892110507
Author(s):  
Amar B. Patil ◽  
Vishwambhar S. Patil ◽  
Pooja P. Humane ◽  
Nalini S. Patil ◽  
Govind R. Rajput
Keyword(s):  
Differential Equations ◽  
Energy Transport ◽  
Stretching Surface ◽  
Nanofluid Flow ◽  
Linear Ordinary Differential Equations ◽  
Maxwell Nanofluid ◽  
Similarity Transformations ◽  
Flow Past ◽  
Chemically Reacting ◽  
The Impact

The present work deals with chemically reacting unsteady magnetohydrodynamic Maxwell nanofluid flow past an inclined permeable stretching surface embedded in a porous medium with thermal radiation. The formulated governing partial differential equations conveying the flow model of Maxwell with Buongiorno modeled nanofluid is transformed into the system of highly non-linear ordinary differential equations via suitable similarity transformations; those equations are transmuted into an initial value problem and then solved numerically by a shooting approach with Runge–-Kutta fourth-order schema. To obtain the physical insight of the flow situation, the influence of associated parameters on the velocity, temperature, and concentration profiles is sketched graphically with the aid of MATLAB software. Furthermore, engineering quantities of interest are interpreted graphically. The computed numerical results are compared to estimate the validity of the achieved results; it has been found out that the computed results are highly accurate. The impact of the Maxwell parameter and inclination angle of the sheet on the velocity field is observed in decaying. Both thermal and solutal energy transport are progressive in nature as the Maxwell parameter and thermophoresis parameter grows, and a reverse trend is observed for Prandtl number.

Existence of Dual Solutions and Melting Phenomenon in Unsteady Nanofluid Flow and Heat Transfer over a Stretching Surface

2019 ◽  
Vol 35 (5) ◽  
pp. 705-717
Author(s):  
S. Ghosh ◽  
S. Mukhopadhyay ◽  
K. Vajravelu
Keyword(s):  
Heat Transfer ◽  
Differential Equations ◽  
Nonlinear Partial Differential Equations ◽  
Lewis Number ◽  
Skin Friction Coefficient ◽  
Dual Solutions ◽  
Stretching Surface ◽  
Melting Phenomenon ◽  
Runge Kutta Method ◽  
Layer Flow

ABSTRACTThe problem of unsteady boundary layer flow of a nanofluid over a stretching surface is studied. Heat transfer due to melting is analyzed. Using a similarity transformation the governing coupled nonlinear partial differential equations of the model are reduced to a system of nonlinear ordinary differential equations, and then solved numerically by a Runge-Kutta method with a shooting technique. Dual solutions are observed numerically and their characteristics are analyzed. The effects of the pertinent parameters such as the acceleration parameter, the Brownian motion parameter, the thermophoresis parameter, the Prandtl number and the Lewis number on the velocity, temperature and concentration fields are discussed. Also the effects of these parameters on the skin friction coefficient, the Nusselt number and the Sherwood number are analyzed through graphs. It is observed that the melting phenomenon has a significant effect on the flow, heat and mass transfer characteristics.

scholarly journals A Numerical Approach for an Unsteady Tangent Hyperbolic Nanofluid Flow past a Wedge in the Presence of Suction/Injection

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
U. Shahzad ◽  
M. Mushtaq ◽  
S. Farid ◽  
K. Jabeen ◽  
R.M.A. Muntazir
Keyword(s):  
Differential Equations ◽  
Graphical Representation ◽  
Numerical Technique ◽  
Darcy Number ◽  
Numerical Approach ◽  
Nanofluid Flow ◽  
Similarity Transformations ◽  
Flow Past ◽  
Layer Flow ◽  
The Impact

The analysis of unsteady tangent hyperbolic nanofluid flow past a wedge with injection-suction, because of its beneficial uses, has gained a lot of attention. The present study is mainly concerned with tangent hyperbolic nanofluid (non-Newtonian nanofluid). First, we have converted the system of partial differential equations (PDEs) to a system of ordinary differential equations (ODEs) with the help of appropriate similarity transformations. Boundary conditions are also transformed by utilizing suitable similarity transformation. Now, for the obtained ODEs, we have used the numerical technique bvp 4 c and investigated the velocity, temperature, and concentration profiles. The accuracy of the flow model is validated by applying MAPLE d-solve command having good agreement while comparing the numerical results obtained by bvp4c for both suction and injection cases. The effects of distinct dimensionless parameters on the various profiles are being analyzed. The novel features such as thermophoresis and Brownian motion are also discussed to investigate the characteristics of heat and mass transfer. Graphical representation of the impact of varying parameters and the solution method for the abovementioned model is thoroughly discussed. It was observed that suction or injection can play a key role in controlling boundary layer flow and brings stability in the flow. It was also noticed that by increasing the Darcy number, velocity profile increases in both injection-suction cases.

scholarly journals Numerical investigation of mixed convection boundary layer flow for nanofluids under quasilinearization technique

2021 ◽  
Vol 3 (11) ◽  
Author(s):  
Srimanta Maji ◽  
Akshaya K. Sahu
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Differential Equations ◽  
Mixed Convection ◽  
Boundary Layer Flow ◽  
Dual Solutions ◽  
Nonlinear Pdes ◽  
Convection Boundary Layer ◽  
Physical Parameters ◽  
Layer Flow

AbstractThe study of boundary layer flow under mixed convection has been investigated numerically for various nanofluids over a semi-infinite flat plate which has been placed vertically upward for both buoyancy-induced assisting and buoyancy-induced opposing flow cases. To facilitate numerical calculations, a suitable transformation has been made for the governing partial differential equations (PDEs). Then, similarity method has been applied locally to approximate the nonlinear PDEs into a coupled nonlinear ordinary differential equations (ODEs). Then, quasilinearization method has been taken for linearizing the nonlinear terms which are present in the governing equations. Thereafter, implicit trapezoidal rule has been taken for integration numerically along with principle of superposition. The effect of physical parameters which are involved in the study are analyzed on the flow and heat transfer characteristics. This study reveals the presence of dual solutions in case of opposing flow. Further, this study shows that with increasing $$\phi$$ ϕ and Pr, the range of existence of dual solutions becomes wider. Also, it has been noted that nanofluids enhance the process of heat transfer for buoyancy assisting flow and it delays the separation point in case of opposing flow.

scholarly journals Boundary layer flow of magneto-micropolar nanofluid flow with Hall and ion-slip effects using variable thermal diffusivity

2017 ◽  
Vol 65 (3) ◽  
pp. 383-390 ◽  
Author(s):  
M. Bilal ◽  
S. Hussain ◽  
M. Sagheer
Keyword(s):  
Thermal Diffusivity ◽  
Differential Equations ◽  
Skin Friction Coefficient ◽  
Nanofluid Flow ◽  
Similarity Transformations ◽  
Slip Effects ◽  
Micropolar Nanofluid ◽  
Ion Slip ◽  
Layer Flow ◽  
Linear Differential

AbstractIn the present article, magneto-micropolar nanofluid flow with suction or injection in a porous medium over a stretching sheet for the heat and mass transfer is analyzed numerically. Both Hall and ion-slip effects are considered along with variable thermal diffusivity. The governing partial differential equations are transformed to ordinary differential equations using usual similarity transformations. These coupled non-linear differential equations are solved using the shooting method. Effects of prominent parameter on velocities, temperature and concentration are discussed graphically. Numerical values of skin-friction coefficient, local Nusselt number and local Sherwood number are also tabulated and discussed.

scholarly journals Magnetohydrodynamic(MHD) Boundary Layer Flow of Eyring-Powell Nanofluid Past Stretching Cylinder With Cattaneo-Christov Heat Flux Model

2019 ◽  
Vol 8 (1) ◽  
pp. 303-317 ◽  
Author(s):  
Wubshet Ibrahim ◽  
Bullo Hindebu
Keyword(s):  
Differential Equations ◽  
Magnetic Parameter ◽  
Skin Friction Coefficient ◽  
Local Skin ◽  
Fluid Parameter ◽  
Non Linear ◽  
Local Skin Friction ◽  
Curvature Parameter ◽  
Layer Flow ◽  
Mhd Boundary Layer Flow

Abstract This study analyzed the MHD boundary layer flow of Eyring-Powell nanofluid past stretching cylinder with Cattaneo-Christov heat flux model. The governing non-linear partial differential equations corresponding to the momentum, energy and concentration have been formulated and transformed into a set of non-linear ordinary differential equations by using similarity transformations. Then the resulting non-linear high order ordinary differential equations of momentum, energy and concentration, subjected to boundary conditions were solved numerically by utilizing the second-order accurate implicit finite difference method known as Keller-Box which is programmed in the MATLABR2017b software. The results indicated that the velocity profile increases as the Eyring-Powell fluid parameter M and the curvature parameter γ increase but it decreases as the magnetic parameter Ha increases. Both the temperature and the concentration profiles have revealed an increment pattern for large values of the magnetic parameter Ha and the thermophoresis parameter Nt but a decrement manner with increasing values of the Eyring-Powell fluid parameter M. The Brownian motion parameter Nb has shown an opposite influence on the temperature and the concentration profiles. The results also depicted that the local skin friction coefficient increases with increasing in Eyring-Powell fluid parameter M, magnetic parameter Ha. Besides, it is found that both the local Nusselt number Nux and the local Sherwood number Shx are higher for large vales of Eyring-Powell fluid parameter M and curvature parameter γ. Furthermore, the present results for the local skin friction coefficient, the local Nusselt number and the local Sherwood number are validated with the data of previously published literature for various limiting conditions where a very sound agreement has been attained.

Sign in / Sign up

Export Citation Format

Share Document