Fabrication and Fuel-Cell Properties of Sm-Doped CeO2 Electrolyte Film by Electrophoretic Deposition

2007 ◽  
Vol 350 ◽  
pp. 175-178 ◽  
Author(s):  
Satoshi Nakayama ◽  
Masaru Miyayama
Keyword(s):  
Fuel Cell ◽  
Solid Oxide Fuel Cells ◽  
Electrophoretic Deposition ◽  
Film Formation ◽  
Solid Oxide ◽  
Oxide Fuel ◽  
Electrolyte Film ◽  
A Cell ◽  
Free Films ◽  
Electrolyte Resistance

Electrolyte films of Ce0.8Sm0.2O1.9 (SDC) were prepared on NiO-SDC anode substrates by electrophoretic deposition (EPD) for intermediate-temperature solid oxide fuel cells (SOFCs). Dense and crack-free films were fabricated by cofiring the films and substrates. A cell using an SDC electrolyte film with a La0.6Sr0.4CoO3-δ cathode exhibited a power density of 281 mW/cm2 and an electrolyte resistance of 0.064 cm2 at 600°C. The film formation of SDC by EPD was found effective in decreasing the electrolyte resistance.

scholarly journals Integrated Cr and S poisoning of a La0.6Sr0.4Co0.2Fe0.8O3−δ (LSCF) cathode for solid oxide fuel cells

RSC Advances ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 7-14
Author(s):  
Cheng Cheng Wang ◽  
Mortaza Gholizadeh ◽  
Bingxue Hou ◽  
Xincan Fan
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Solid Oxide Fuel Cells ◽  
Solid Oxide Fuel Cell ◽  
Solid Oxide ◽  
Cell Performance ◽  
Oxide Fuel ◽  
Performance Deterioration

Strontium segregation in a La0.6Sr0.4Co0.2Fe0.8O3−δ (LSCF) electrode reacts with Cr and S in a solid oxide fuel cell (SOFC), which can cause cell performance deterioration.

Operation of anode-supported thin electrolyte film solid oxide fuel cells at 800°C and below

1998 ◽  
Vol 71 (1-2) ◽  
pp. 302-305 ◽  
Author(s):  
L.G.J de Haart ◽  
K Mayer ◽  
U Stimming ◽  
I.C Vinke
Keyword(s):  
Fuel Cells ◽  
Solid Oxide Fuel Cells ◽  
Solid Oxide ◽  
Oxide Fuel ◽  
Electrolyte Film

New buffer layer material La(Pr)CrO3for intermediate temperature solid oxide fuel cell using LaGaO3-based electrolyte film

2012 ◽  
Vol 27 (15) ◽  
pp. 1906-1914 ◽  
Author(s):  
Young-Wan Ju ◽  
Jong-Eun Hong ◽  
Junji Hyodo ◽  
Toru Inagaki ◽  
Shintaro Ida ◽  
...  
Keyword(s):  
Fuel Cell ◽  
Solid Oxide Fuel Cell ◽  
Buffer Layer ◽  
Solid Oxide ◽  
Intermediate Temperature ◽  
Oxide Fuel ◽  
Layer Material ◽  
Electrolyte Film ◽  
Image Position

Abstract

Location of deuterium sites at operating temperature from neutron diffraction of BaIn0.6Ti0.2Yb0.2O2.6−n(OH)2n, an electrolyte for proton-solid oxide fuel cells

2016 ◽  
Vol 18 (23) ◽  
pp. 15751-15759 ◽  
Author(s):  
Angélique Jarry ◽  
Olivier Joubert ◽  
Emmanuelle Suard ◽  
Jean Marc Zanotti ◽  
Eric Quarez
Keyword(s):  
Fuel Cell ◽  
Neutron Diffraction ◽  
Solid Oxide Fuel Cells ◽  
Solid Oxide Fuel Cell ◽  
Operating Temperature ◽  
Solid Oxide ◽  
Oxide Fuel ◽  
Proton Diffusion ◽  
Hydration Mechanism ◽  
Fundamental Understanding

A fundamental understanding of the doping effect on the hydration mechanism and related proton diffusion pathways are keys to the progress of Proton-Solid Oxide Fuel Cell (H+-SOFC) technologies.

Al2O3 toughening ScSZ electrolyte fabricated by water-based tape casting technique for solid oxide fuel cells

2021 ◽  
pp. 1-17
Author(s):  
Haoran Wang ◽  
Ze Lei ◽  
Han Zhang ◽  
Yongkang Li ◽  
Junmeng Jing ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Solid Oxide Fuel Cells ◽  
Bending Strength ◽  
Tape Casting ◽  
Solid Oxide ◽  
Electrical Performance ◽  
Oxide Fuel ◽  
Casting Technique ◽  
Electrolyte Film ◽  
Water Based

Abstract A water-based tape casting slurry is reported to prepare the ceria and scandia co-doped zirconia (ScSZ) electrolyte films. The slurry is characterized and optimized through Zeta potential and rheological property measurements. Smooth and flat ScSZ electrolyte films are obtained by improving the sintering process. The microstructure, electrical performance, and mechanical property of ScSZ with adding different contents of Al2O3 are also investigated. The results show that a proper amount of Al2O3 has a beneficial effect on the densification of ScSZ. Significant decrease at the grain boundary resistance of ScSZ is observed by Al2O3 addition. The bending strength of the sample with 0.5 wt.% Al2O3 (ScSZ-0.5A) is about 400 MPa, which is 20% higher than pure ScSZ. The ScSZ-0.5A electrolyte film fabricated by water-based tape casting method shows appropriate electrical conductivity and high mechanical strength, which is promising for the practical application in solid oxide fuel cells (SOFCs).

scholarly journals A robust and active hybrid catalyst for facile oxygen reduction in solid oxide fuel cells

2017 ◽  
Vol 10 (4) ◽  
pp. 964-971 ◽  
Author(s):  
Yu Chen ◽  
Yan Chen ◽  
Dong Ding ◽  
Yong Ding ◽  
YongMan Choi ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Fuel Cell ◽  
Solid Oxide Fuel Cells ◽  
Solid Oxide Fuel Cell ◽  
Oxygen Reduction ◽  
Electrocatalytic Activity ◽  
Solid Oxide ◽  
Oxide Fuel ◽  
Hybrid Catalyst ◽  
Fuel Cell Cathode

A hybrid catalyst coating dramatically enhances the electrocatalytic activity and durability of a solid oxide fuel cell cathode.

Sign in / Sign up

Export Citation Format

Share Document