The Effect of Co Addition on Glassy Forming Ability and Soft Magnetic Properties of Fe-Si-B-P Bulk Metallic Glass

2012 ◽  
Vol 508 ◽  
pp. 112-116 ◽  
Author(s):  
Xue Li ◽  
Yan Zhang ◽  
Hidemi Kato ◽  
Akihiro Makino ◽  
Akihisa Inoue

We Successfully Prepared the Rod Glassy Samples of (Fe1-xCox)76Si9B10P5 (x = 0~0.4) Bulk Metallic Glass (BMG) with the Diameters up to 3.0 mm by Substituting Fe for a Small Amount of Co Element. A Certain Amount of Co Substitution for Fe Contributes to the Increase of the Glass-Forming Ability (GFA) while Maintaining Good Mechanical Properties (the Fracture Strength up to 3700 MPa). This Co-Added Ferromagnetic Bulk Glassy Alloy System Also Exhibits a Higher Saturation Magnetization of 1.49 T and Lower Coercive Force (Hc, 1.2 A/m). The Fe-Based BMGs with Alloying a Small Amount of Co Element Demonstrate Excellent Combination of High GFA, Good Soft-Magnetic Properties as Well as High Strength.

2017 ◽  
Vol 898 ◽  
pp. 703-708 ◽  
Author(s):  
Qi Kui Man ◽  
Ya Qiang Dong ◽  
Chun Tao Chang ◽  
Xin Min Wang ◽  
Run Wei Li

The thermal stability, glass-forming ability, soft-magnetic properties and mechanical properties of Co46Fe19+xB22.5Si5.5Nb7–x (x=0–2) bulk metallic glasses were investigated. The 5.5 at% Nb addition was found to be effective in approaching alloy to a eutectic point, resulting in an increase in glass-forming ability. By copper mold casting, bulk metallic glass rods with diameters up to 5 mm were produced. Except for high glass-forming ability, the bulk metallic glasses also exhibit good soft-magnetic properties, i.e., low coercive force of 1.34–2.14 A/m, high effective permeability at 1 kHz of 2.26–3.06×104, and high fractures strength (σf) of 4010–4460 MPa. This Co-based bulk metallic glass system with high strengths and excellent soft-magnetic properties is promising for future applications as a new functional material.


2014 ◽  
Vol 216 ◽  
pp. 45-48
Author(s):  
Dragoş Buzdugan ◽  
Cosmin Codrean ◽  
Viorel Aurel Şerban ◽  
Mircea Vodǎ

Development of Fe-based bulk metallic glasses (BMG) with good mechanical and soft magnetic properties has become a major objective in the materials science field. Bulk metallic glasses present an interesting combination of properties. They exhibit very high strength (both in tension and compression), large elastic elongation limit, high hardness, excellent corrosion resistance, and good soft magnetic properties. These properties makes them suitable for many applications like high resistant control cables, pressure vessels, micro-components, pressure sensors, microgears for motors, magnetic cores for power supplies and hard fibers in composite materials. Multi-component Fe60Co14Ga2P10B5Si3Al3C3bulk metallic glass was synthesized in rod form with a diameter of 1 mm by copper mould casting technique using raw industrial materials. The obtained alloy was analyzed by X-ray diffraction (XRD), differential thermal analysis (DTA) and scanning electron microscopy (SEM) techniques, in order to determine the phase constituent, the thermal stability and the fracture surfaces of as-cast samples. The mechanical behaviour was investigated by microhardness and compression tests. The values recorded for hardness and fracture strength includes this alloy in the category of high resistant materials.


ChemInform ◽  
2015 ◽  
Vol 46 (26) ◽  
pp. no-no
Author(s):  
Jianfeng Wang ◽  
Wenbo Cao ◽  
Liguo Wang ◽  
Shijie Zhu ◽  
Shaokang Guan ◽  
...  

2007 ◽  
Vol 48 (5) ◽  
pp. 1157-1160 ◽  
Author(s):  
Tao Zhang ◽  
Fengjuan Liu ◽  
Shujie Pang ◽  
Ran Li

Sign in / Sign up

Export Citation Format

Share Document