Characterization of Coal Fly Ash, Bottom Ash and their Possibilities as Catalysts for Biodiesel Production

2021 ◽  
Vol 904 ◽  
pp. 413-418
Author(s):  
Wilasinee Kingkam ◽  
Sasikarn Nuchdang ◽  
Dussadee Rattanaphra
Keyword(s):  
Fly Ash ◽  
Palm Oil ◽  
Power Plants ◽  
Coal Fly Ash ◽  
Bottom Ash ◽  
Biodiesel Production ◽  
Catalyst Loading ◽  
Free Lime ◽  
Operation Conditions ◽  
Class C

Coal fly ash (CFA) and bottom ash (BA) obtained from coal fired power plants in Thailand and local supplier were characterized using XRF, XRD and N2 adsorption-desorption techniques. Their possibilities for conversion of palm oil into biodiesel were investigated. Selected CFA was also modified with lanthanum (La) at different La loading and the influence of La loading on biodiesel conversion was evaluated. The resulted showed that the Class C CFA as contained large amount of CaO (free lime) could catalyze the transesterification to achieve the highest FAME content of 89% under the operation conditions; the reaction temperature of 200 °C, the reaction pressure of 39 bars, the catalyst loading of 5 wt% of oil, the molar of oil to methanol of 1:30 and the stirring speed of 600 rpm for 5 h. The addition of La on the Class C CFA had a negative effect on conversion of palm oil. The FAME content decreased gradually from 89 to 62% with increasing La loading from 0 to 1 wt%.

Zinc Oxide Recovery from Solid Waste of Electric Arc Furnace Dust (EAFD) Using Hydrometallurgical Method

2020 ◽  
Vol 849 ◽  
pp. 108-112
Author(s):  
Widi Astuti ◽  
Agus Haerudin ◽  
Istihanah Nurul Eskani ◽  
Fajar Nurjaman ◽  
Aulia Pertiwi Tri Yuda ◽  
...  
Keyword(s):  
Fly Ash ◽  
Enrichment Factor ◽  
Power Plants ◽  
Coal Fly Ash ◽  
Bottom Ash ◽  
Coal Ash ◽  
Atomic Emission ◽  
Xrd Analysis ◽  
Unburned Carbon ◽  
Amorphous Glass

Indonesia coal ash is predicted to reach 10.8 million tons in the year 2020 but its utilization is still limited. In the last decade, coal ash has become a promising REY source candidate. To determine the potency of REY in Indonesia coal ash, information about element concentration and mineralogy of the ash is essential. In this study, coal ash samples were taken from Paiton-2, Pacitan, Rembang, and Tanjung Jati coal-fired power plants. Element content and mineralogy were analyzed using Inductive Couple Plasma Mass Spectroscopy/Atomic Emission Spectroscopy (ICP-MS/AES), X-Ray Diffractometer (XRD) and petrographic. The results showed that coal fly ash and bottom ash contains critical REY in the range of 38% to 41% with Coutlook larger than one. XRD analysis showed that both fly ash and bottom ash have similar mineral phases with slightly different concentrations. The mineral phase is dominated by amorphous glass, quartz, Fe-bearing minerals, and unburned carbon. The amorphous glass phase in fly ash is in the range of 23 to 34% while in bottom ash between 14 and 34%. Unburned carbon content in fly ash and bottom ashes are 7-13% and 7-19%, respectively. Fe-bearing mineral content in fly ash is 15-20% and bottom ash is 13-20%. In addition, Indonesia coal ash has a higher Heavy-REY enrichment factor than Light-REY. The Enrichment Factor of HREY in fly ash is as much as 1.3 times (in average) of the bottom ash.

Potency of Rare Earth Elements and Yttrium in Indonesia Coal Ash

2020 ◽  
Vol 849 ◽  
pp. 102-107
Author(s):  
Widya Rosita ◽  
Dea Anisa Ayu Besari ◽  
I Made Bendiyasa ◽  
Indra Perdana ◽  
Ferian Anggara ◽  
...  
Keyword(s):  
Fly Ash ◽  
Enrichment Factor ◽  
Power Plants ◽  
Coal Fly Ash ◽  
Bottom Ash ◽  
Coal Ash ◽  
Atomic Emission ◽  
Xrd Analysis ◽  
Unburned Carbon ◽  
Amorphous Glass

Indonesia coal ash is predicted to reach 10.8 million tons in the year 2020 but its utilization is still limited. In the last decade, coal ash has become a promising REY source candidate. To determine the potency of REY in Indonesia coal ash, information about element concentration and mineralogy of the ash is essential. In this study, coal ash samples were taken from Paiton-2, Pacitan, Rembang, and Tanjung Jati coal-fired power plants. Element content and mineralogy were analyzed using Inductive Couple Plasma Mass Spectroscopy/Atomic Emission Spectroscopy (ICP-MS/AES), X-Ray Diffractometer (XRD) and petrographic. The results showed that coal fly ash and bottom ash contains critical REY in the range of 38% to 41% with Coutlook larger than one. XRD analysis showed that both fly ash and bottom ash have similar mineral phases with slightly different concentrations. The mineral phase is dominated by amorphous glass, quartz, Fe-bearing minerals, and unburned carbon. The amorphous glass phase in fly ash is in the range of 23 to 34% while in bottom ash between 14 and 34%. Unburned carbon content in fly ash and bottom ashes are 7-13% and 7-19%, respectively. Fe-bearing mineral content in fly ash is 15-20% and bottom ash is 13-20%. In addition, Indonesia coal ash has a higher Heavy-REY enrichment factor than Light-REY. The Enrichment Factor of HREY in fly ash is as much as 1.3 times (in average) of the bottom ash.

UTILIZATION OF COAL FLY ASH FROM POWER PLANTS - I. ASH CHARACTERIZATION

2008 ◽  
Vol 7 (3) ◽  
pp. 289-293 ◽  
Author(s):  
Maria Harja ◽  
Marinela Barbuta ◽  
Lacramioara Rusu ◽  
Nicolae Apostolescu
Keyword(s):  
Fly Ash ◽  
Power Plants ◽  
Coal Fly Ash

Synthesis and characterization of coal fly ash supported zinc oxide catalyst for biodiesel production using used cooking oil as feed

2021 ◽  
Vol 170 ◽  
pp. 302-314
Author(s):  
Adeyinka S. Yusuff ◽  
Aman K. Bhonsle ◽  
Jayati Trivedi ◽  
Dinesh P. Bangwal ◽  
Lok P. Singh ◽  
...  
Keyword(s):  
Zinc Oxide ◽  
Fly Ash ◽  
Oxide Catalyst ◽  
Coal Fly Ash ◽  
Biodiesel Production ◽  
Synthesis And Characterization ◽  
Cooking Oil ◽  
Used Cooking Oil

scholarly journals Preparation of Synthetic Zeolites from Coal Fly Ash by Hydrothermal Synthesis

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1267
Author(s):  
David Längauer ◽  
Vladimír Čablík ◽  
Slavomír Hredzák ◽  
Anton Zubrik ◽  
Marek Matik ◽  
...  
Keyword(s):  
Fly Ash ◽  
Coal Combustion ◽  
Power Plants ◽  
Coal Fly Ash ◽  
Thermal Power ◽  
Product Analysis ◽  
Coal Combustion Products ◽  
X Ray ◽  
Wide Range ◽  
Silica Alumina

Large amounts of coal combustion products (as solid products of thermal power plants) with different chemical and physical properties cause serious environmental problems. Even though coal fly ash is a coal combustion product, it has a wide range of applications (e.g., in construction, metallurgy, chemical production, reclamation etc.). One of its potential uses is in zeolitization to obtain a higher added value of the product. The aim of this paper is to produce a material with sufficient textural properties used, for example, for environmental purposes (an adsorbent) and/or storage material. In practice, the coal fly ash (No. 1 and No. 2) from Czech power plants was firstly characterized in detail (X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopy with energy dispersive X-ray analysis (SEM-EDX), particle size measurement, and textural analysis), and then it was hydrothermally treated to synthetize zeolites. Different concentrations of NaOH, LiCl, Al2O3, and aqueous glass; different temperature effects (90–120 °C); and different process lengths (6–48 h) were studied. Furthermore, most of the experiments were supplemented with a crystallization phase that was run for 16 h at 50 °C. After qualitative product analysis (SEM-EDX, XRD, and textural analytics), quantitative XRD evaluation with an internal standard was used for zeolitization process evaluation. Sodalite (SOD), phillipsite (PHI), chabazite (CHA), faujasite-Na (FAU-Na), and faujasite-Ca (FAU-Ca) were obtained as the zeolite phases. The content of these zeolite phases ranged from 2.09 to 43.79%. The best conditions for the zeolite phase formation were as follows: 4 M NaOH, 4 mL 10% LiCl, liquid/solid ratio of 30:1, silica/alumina ratio change from 2:1 to 1:1, temperature of 120 °C, process time of 24 h, and a crystallization phase for 16 h at 50 °C.

Calcium Methoxide Synthesis from Quick Lime Using as Solid Catalyst in Refined Palm Oil Biodiesel Production

2013 ◽  
Vol 834-836 ◽  
pp. 550-554 ◽  
Author(s):  
Warakom Suwanthai ◽  
Vittaya Punsuvon ◽  
Pilanee Vaithanomsat
Keyword(s):  
Palm Oil ◽  
Acid Methyl Ester ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
Solid Catalyst ◽  
Solid Base ◽  
Quick Lime ◽  
X Ray ◽  
Refined Palm Oil

In this research, calcium methoxide was synthesized as solid base catalyst from quick lime for biodiesel production. The catalyst was further characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), attenuated total reflection fourier transform (ATR-FTIR) and Energy-dispersive X-ray spectroscopies (EDX) to evaluate its performance. The transesterification of refined palm oil using calcium methoxide and the process parameters affecting the fatty acid methyl ester (FAME) content such as catalyst concentration, methanol:oil molar ratio and reaction time were investigated. The results showed that the FAME content at 97% was achieved within 3 h using 3 %wt catalyst loading, 12:1 methanol:oil molar ratio and 65 °C reaction temperature. The result of FAME suggested calcium methoxide was the promising solid catalyst for substitution of the conventional liquid catalyst.

scholarly journals Reactivity of Ground Coal Bottom Ash to Be Used in Portland Cement

J ◽  
2021 ◽  
Vol 4 (3) ◽  
pp. 223-232
Author(s):  
Esperanza Menéndez ◽  
Cristina Argiz ◽  
Miguel Ángel Sanjuán
Keyword(s):  
Fly Ash ◽  
Coal Fly Ash ◽  
Bottom Ash ◽  
Blended Cement ◽  
Coal Ash ◽  
Pozzolanic Reaction ◽  
Natural Sand ◽  
Coal Bottom Ash ◽  
Novel Material ◽  
Pozzolanic Properties

Ground coal bottom ash is considered a novel material when used in common cement production as a blended cement. This new application must be evaluated by means of the study of its pozzolanic properties. Coal bottom ash, in some countries, is being used as a replacement for natural sand, but in some others, it is disposed of in a landfill, leading thus to environmental problems. The pozzolanic properties of ground coal bottom ash and coal fly ash cements were investigated in order to assess their pozzolanic performance. Proportions of coal fly ash and ground coal bottom ash in the mixes were 100:0, 90:10, 80:20, 50:50, 0:100. Next, multicomponent cements were formulated using 10%, 25% or 35% of ashes. In general, the pozzolanic performance of the ground coal bottom ash is quite similar to that of the coal fly ash. As expected, the pozzolanic reaction of both of them proceeds slowly at early ages, but the reaction rate increases over time. Ground coal bottom ash is a promising novel material with pozzolanic properties which are comparable to that of coal fly ashes. Then, coal bottom ash subjected to an adequate mechanical grinding is suitable to be used to produce common coal-ash cements.

Total reflection X-ray fluorescence analysis of fly ash from Bulgarian coal-fired power plants

2015 ◽  
Vol 69 (5) ◽  
Author(s):  
Albena K. Detcheva ◽  
Svilen E. Mitsiev ◽  
Paunka S. Vassileva ◽  
Juri H. Jordanov ◽  
Metody G. Karadjov ◽  
...  
Keyword(s):  
Fly Ash ◽  
Power Plants ◽  
Coal Fly Ash ◽  
Internal Standard ◽  
Fluorescence Analysis ◽  
Total Reflection ◽  
X Ray

AbstractThe contents of Cl, Ca, K, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, As, Se, Rb, Sr, Ba and Pb in raw coal fly ash from five Bulgarian power plants were determined by total reflection X-ray fluorescence (TXRF), using gallium as the internal standard. The samples were analysed as in slurry form in Triton

Treatment of Coal Fly Ash And Its Environmentally Friendly Use In Rubber And Plastic Industry

2021 ◽  
Author(s):  
Zawar Hussain ◽  
Gao Lizhen ◽  
Wang Haitao ◽  
Tehreem Ayaz ◽  
Amir Zeb Khan
Keyword(s):  
Fly Ash ◽  
Calcium Carbonate ◽  
Barium Sulfate ◽  
Power Plants ◽  
Coal Fly Ash ◽  
Conveyor Belt ◽  
Plastic Waste ◽  
Talcum Powder ◽  
Coal Power Plants ◽  
Coal Power

Abstract Coal power plants are the major contributor of electricity but these power plants are also producing waste in the form of coal fly ash (CFA). However, it can cause high risk of environmental pollution and pulmonary diseases in humans. Plastic waste is also a problematic waste for many countries in terms of its reuse and recycling. Therefore, this study aims to reuse the waste product (CFA) of coal power plants in rubber conveyer belt instead of calcium carbonate or talcum powder and in recycling of plastic propylene as bonding filler material instead of barium sulfate to increase the durability of plastic products and reduce cost, CFA waste and plastic waste. For this purpose, CFA was treated by different pulverization techniques for the production of conveyor belt. The study found that the most favorable technique was shear based pulverization technique. Application of CFA with rubber was compared with two different chemicals (calcium carbonate and talcum powder) and found that the elongation at break of conveyor belt was 35% increased and abrasion volume was 64% reduced by using treated CFA. Furthermore, CFA was used in molten mass of plastic instead of barium sulfate and the results showed that the use of CFA has improved the dimensional stability of plastic material reducing the cost per ton by 2410 CNY. The study concluded that the performance was increased by applying CFA with a reduction in price as compared to other chemicals.

Sign in / Sign up

Export Citation Format

Share Document