Calcium Methoxide Synthesis from Quick Lime Using as Solid Catalyst in Refined Palm Oil Biodiesel Production

2013 ◽  
Vol 834-836 ◽  
pp. 550-554 ◽  
Author(s):  
Warakom Suwanthai ◽  
Vittaya Punsuvon ◽  
Pilanee Vaithanomsat
Keyword(s):  
Palm Oil ◽  
Acid Methyl Ester ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
Solid Catalyst ◽  
Solid Base ◽  
Quick Lime ◽  
X Ray ◽  
Refined Palm Oil

In this research, calcium methoxide was synthesized as solid base catalyst from quick lime for biodiesel production. The catalyst was further characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), attenuated total reflection fourier transform (ATR-FTIR) and Energy-dispersive X-ray spectroscopies (EDX) to evaluate its performance. The transesterification of refined palm oil using calcium methoxide and the process parameters affecting the fatty acid methyl ester (FAME) content such as catalyst concentration, methanol:oil molar ratio and reaction time were investigated. The results showed that the FAME content at 97% was achieved within 3 h using 3 %wt catalyst loading, 12:1 methanol:oil molar ratio and 65 °C reaction temperature. The result of FAME suggested calcium methoxide was the promising solid catalyst for substitution of the conventional liquid catalyst.

scholarly journals Synthesis and Characterization of Sodium Silicate Produced from Corncobs as a Heterogeneous Catalyst in Biodiesel Production

2020 ◽  
Vol 21 (1) ◽  
pp. 88
Author(s):  
Alwi Gery Agustan Siregar ◽  
Renita Manurung ◽  
Taslim Taslim
Keyword(s):  
Sodium Silicate ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Gas Chromatography Mass Spectrometry ◽  
Catalyst Loading ◽  
Solid Catalyst ◽  
Biodiesel Fuel ◽  
Solid Base ◽  
X Ray ◽  
Biodiesel Synthesis

In this study, silica derived from corncobs impregnated with sodium hydroxide to obtain sodium silicate was calcined, prepared, and employed as a solid base catalyst for the conversion of oils to biodiesel. The catalyst was characterized by X-Ray Diffraction (XRD), Fourier-Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscope Energy Dispersive X-Ray Spectroscopy (SEM-EDS), and Brunauer-Emmet-Teller (BET) and Barrett-Joyner-Halenda (BJH) methods. Gas Chromatography-Mass Spectrometry (GC-MS) was used to characterize the biodiesel products. The optimum catalyst conditions were calcination temperature of 400 °C for 2 h, catalyst loading of 2%, and methanol: oil molar ratio of 12:1 at 60 °C for 60 min, that resulted in a yield of 79.49%. The final product conforms to the selected biodiesel fuel properties of European standard (EN14214) specifications. Calcined corncob-derived sodium silicate showed high potential for use as a low-cost, high-performance, simple-to-prepare solid catalyst for biodiesel synthesis.

Transesterification of Pongamia pinnata Oil into Biodiesel Using Quick Lime Based Calcium Methoxide as Catalyst

2014 ◽  
Vol 625 ◽  
pp. 324-327 ◽  
Author(s):  
Sasikarn Panpraneecharoen ◽  
Vittaya Punsuvon
Keyword(s):  
Catalyst Concentration ◽  
Acid Methyl Ester ◽  
Attenuated Total Reflection ◽  
Pongamia Pinnata ◽  
Biodiesel Production ◽  
Bet Surface Area ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
Quick Lime ◽  
X Ray

The calcium methoxide was synthesized as catalyst from quick lime for biodiesel production of Pongamia pinnata (P. pinnata) oil. The catalyst was further characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), attenuated total reflection fourier transform (ATR-FTIR), energy dispersive X-ray spectroscopies (EDX) and BET surface area analysis to evaluate its performance. The parameters affecting the fatty acid methyl ester (FAME) content such as catalyst concentration, methanol to oil molar ratio and reaction time were investigated. Under optimized reaction condition, the FAME yield at 93.94 % was achieved within 3 h using 3 % wt catalyst concentration, 15:1 methanol to oil molar ratio, 65 °C reaction temperature and 750 rpm stirring rate. The result of FAME suggested that calcium methoxide catalyst has promising viability in transesterification for biodiesel production.

scholarly journals Synthesis of Magnetic Base Catalyst from Industrial Waste for Transesterification of Palm Oil

2021 ◽  
Vol 17 (1) ◽  
pp. 53-64
Author(s):  
Shamala Gowri Krishnan ◽  
Fei-Ling Pua ◽  
Hong-Hua Lim
Keyword(s):  
Palm Oil ◽  
Industrial Waste ◽  
Catalytic Performance ◽  
Raw Material ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
Impregnation Method ◽  
X Ray ◽  
Carbon Dioxide Co2

Industrial waste is produced in large amounts annually; without proper planning, the waste might cause a serious threat to the environment. Hence, an industrial waste-based heterogeneous magnetic catalyst was synthesized using carbide lime waste (CLW) as raw material for biodiesel production via transesterification of palm oil. The catalyst was successfully synthesized by the one-step impregnation method and calcination at 600 °C. The synthesized catalyst, C-CLW/g-Fe2O3, was characterized by temperature-programmed desorption of carbon dioxide (CO2-TPD), scanning electron microscopy (SEM), electron dispersive X-ray spectroscopy (EDX), X-ray Diffraction (XRD), Brunauer-Emmett-Teller (BET), vibrating sample magnetometer (VSM), and Fourier transform infrared spectroscopy (FT-IR). The catalyst has a specific surface area of 18.54 m2/g and high basicity of 3,637.20 µmol/g. The catalytic performance shows that the optimum reaction conditions are 6 wt% catalyst loading, 12:1 methanol to oil molar ratio with the reaction time of 3 h at 60 °C to produce 90.5% biodiesel yield. The catalyst exhibits good catalytic activity and magnetism, indicating that the CLW can be a potential raw material for catalyst preparation and application in the biodiesel industry. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

Biodiesel Production From Waste Palm Oil Using Palm Empty Fruit Bunch-Derived Novel Carbon Acid Catalyst

2017 ◽  
Vol 140 (3) ◽  
Author(s):  
P. G. I. Thushari ◽  
S. Babel
Keyword(s):  
Palm Oil ◽  
Alternative Energy ◽  
Acid Methyl Ester ◽  
Acid Catalyst ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Empty Fruit Bunch ◽  
X Ray ◽  
Ft Ir ◽  
Carbon Acid

Production of biodiesel from waste palm oil (WPO) can provide alternative energy and at the same time reduce the problems created by disposal of WPO. In this study, a novel, inexpensive, and environmental benign carbon acid catalyst is prepared by direct in situ concentrated H2SO4 impregnation of palm empty fruit bunch (PEFB) powder and employed for biodiesel production using WPO. The structure and the physiochemical properties of the prepared catalyst (PEFB-DS-SO3H) are analyzed by acid-base back titration data, energy dispersive X-ray spectroscopy (scanning electron microscopy (SEM)-EDS), SEM, Fourier transform infrared (FT-IR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and using N2 adsorption and desorption isotherm data. It is observed that the catalyst has a unique amorphous structure with total acid density of 5.40 mmolg−1, surface area of 5.5 m2g−1, and 0.31 cm3g−1 pore volume. In addition, FT-IR, XPS, and EDS results confirm a successful sulfonation during the catalyst preparation. It is found that fatty acid methyl ester (FAME) yield increases with increasing methanol:oil (molar ratio) and reaction time up to an optimum value. The highest biodiesel yield of 91% is reported under reaction conditions of 5 wt % catalyst, 14:1 methanol: oil (molar ratio), at 65–70 °C after 14 h in an open reflux system. Results show that the catalyst can be reused for four consecutive cycles without significant loss of catalytic activity. Fuel properties of the produced biodiesel are compatible with the international fuel standards for biodiesel.

Natural Hydroxyapatite (NHAp) Derived from Pork Bone as a Renewable Catalyst for Biodiesel Production via Microwave Irradiation

2015 ◽  
Vol 659 ◽  
pp. 216-220 ◽  
Author(s):  
Achanai Buasri ◽  
Thaweethong Inkaew ◽  
Laorrut Kodephun ◽  
Wipada Yenying ◽  
Vorrada Loryuenyong
Keyword(s):  
Reaction Time ◽  
Microwave Power ◽  
Raw Materials ◽  
Raw Material ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
X Ray ◽  
Animal Bone ◽  
Natural Hydroxyapatite

The use of waste materials for producing biodiesel via transesterification has been of recent interest. In this study, the pork bone was used as the raw materials for natural hydroxyapatite (NHAp) catalyst. The calcination of animal bone was conducted at 900 °C for 2 h. The raw material and the resulting heterogeneous catalyst were characterized using X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopy (SEM) and the Brunauer-Emmett-Teller (BET) method. The effects of reaction time, microwave power, methanol/oil molar ratio, catalyst loading and reusability of catalyst were systematically investigated. The optimum conditions, which yielded a conversion of oil of nearly 94%, were reaction time 5 min and microwave power 800 W. The results indicated that the NHAp catalysts derived from pork bone showed good reusability and had high potential to be used as biodiesel production catalysts under microwave-assisted transesterification of Jatropha Curcas oil with methanol.

Esterification of Waste Palm Oil in Wastewater Pond for Community Biodiesel Production

2014 ◽  
Vol 692 ◽  
pp. 133-138
Author(s):  
Athitan Timyamprasert ◽  
Vittaya Punsuvon ◽  
Kasem Chunkao ◽  
Juan L. Silva ◽  
Tae Jo Kim
Keyword(s):  
Fatty Acid ◽  
Methyl Ester ◽  
Optimum Condition ◽  
Palm Oil ◽  
Fatty Acid Content ◽  
Sulfuric Acid Concentration ◽  
Acid Methyl Ester ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Methyl Ester Content

The aim of this research was to develop a two-step technique to prepare biodiesel from waste palm oil (WPO) with high free fatty acid content. The developed process consists of esterification and transesterification steps. Response surface methodology (RSM) was applied for investigating the experimental design for esterification step. Design of experiment was performed by application of 5-levels-3-factors central composite design in order to study the optimum condition for decreasing FFA in WPO. The WPO with low FFA was further experimented in transesterification step to obtain fatty acid methyl ester (FAME). The investigated results showed that the WPO containing 48.62%wt of high FFA. The optimum condition of esterification step was 28 moles of methanol to FFA in WPO molar ratio, 5.5% sulfuric acid concentration in 90 min of reaction time and 60 °C of reaction temperature. After transesterification step, WPO biodiesel gave methyl ester content at 84.05% according to EN 14103 method. The properties of WPO methyl ester meet the standards of Thailand community biodiesel that can be used as fuel in agricultural machine.

scholarly journals Calcium Oxide Derived from Waste Shells of Mussel, Cockle, and Scallop as the Heterogeneous Catalyst for Biodiesel Production

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Achanai Buasri ◽  
Nattawut Chaiyut ◽  
Vorrada Loryuenyong ◽  
Phatsakon Worawanitchaphong ◽  
Sarinthip Trongyong
Keyword(s):  
Calcium Oxide ◽  
Heterogeneous Catalysts ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
X Ray ◽  
Bet Method ◽  
Xrf Scanning ◽  
Waste Shell ◽  
Calcination Method

The waste shell was utilized as a bioresource of calcium oxide (CaO) in catalyzing a transesterification to produce biodiesel (methyl ester). The economic and environmen-friendly catalysts were prepared by a calcination method at 700–1,000°C for 4 h. The heterogeneous catalysts were characterized by X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopy (SEM), and the Brunauer-Emmett-Teller (BET) method. The effects of reaction variables such as reaction time, reaction temperature, methanol/oil molar ratio, and catalyst loading on the yield of biodiesel were investigated. Reusability of waste shell catalyst was also examined. The results indicated that the CaO catalysts derived from waste shell showed good reusability and had high potential to be used as biodiesel production catalysts in transesterification of palm oil with methanol.

scholarly journals Optimization of Biodiesel Production Using Nanomagnetic CaO-Based Catalysts with Subcritical Methanol Transesterification of Rubber Seed Oil

Energies ◽  
2019 ◽  
Vol 12 (2) ◽  
pp. 230 ◽  
Author(s):  
Veronica Winoto ◽  
Nuttawan Yoswathana
Keyword(s):  
Reaction Time ◽  
Seed Oil ◽  
Acid Methyl Ester ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
Optimum Conditions ◽  
Rubber Seed Oil ◽  
Box Behnken Design ◽  
Rubber Seed

The molar ratio of methanol to rubber seed oil (RSO), catalyst loading, and the reaction time of RSO biodiesel production were optimized in this work. The response surface methodology, using the Box–Behnken design, was analyzed to determine the optimum fatty acid methyl ester (FAME) yield. The performance of various nanomagnetic CaO-based catalysts—KF/CaO-Fe3O4, KF/CaO-Fe3O4-Li (Li additives), and KF/CaO-Fe3O4-Al (Al additives)—were compared. Rubber seed biodiesel was produced via the transesterification process under subcritical methanol conditions with nanomagnetic catalysts. The experimental results indicated that the KF/CaO-Fe3O4-Al nanomagnetic catalyst produced the highest FAME yield of 86.79%. The optimum conditions were a 28:1 molar ratio of methanol to RSO, 1.5 wt % catalyst, and 49 min reaction time. Al additives of KF/CaO-Fe3O4 nanomagnetic catalyst enhanced FAME yield without Al up to 18.17% and shortened the reaction time by up to 11 min.

scholarly journals Oyster andPyramidellaShells as Heterogeneous Catalysts for the Microwave-Assisted Biodiesel Production fromJatropha curcasOil

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Achanai Buasri ◽  
Tidarat Rattanapan ◽  
Chalida Boonrin ◽  
Chosita Wechayan ◽  
Vorrada Loryuenyong
Keyword(s):  
Jatropha Curcas ◽  
Heterogeneous Catalysts ◽  
Biodiesel Production ◽  
Bet Surface Area ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
X Ray ◽  
Microwave Assisted ◽  
Xrf Scanning ◽  
Waste Shell

Microwave-assisted biodiesel production via transesterification ofJatropha curcasoil with methanol using solid oxide catalyst derived from waste shells of oyster andPyramidellawas studied. The shells were calcined at 900°C for 2 h and calcium oxide (CaO) catalyst characterizations were carried out by X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscope (SEM), and the Brunauer-Emmett-Teller (BET) surface area measurements. The effects of reaction variables such as reaction time, microwave power, methanol/oil molar ratio, and catalyst loading on the yield of biodiesel were investigated. Reusability of waste shell catalyst was also examined. The results indicated that the economic and environmentally friendly catalysts derived from oyster andPyramidellashells showed good reusability and had high potential to be used as biodiesel production catalysts under microwave-assisted transesterification ofJatropha curcasoil with methanol.

Utilization of Waste Enamel Venus Shell as Friendly Environmental Catalyst for Synthesis of Biodiesel

2015 ◽  
Vol 659 ◽  
pp. 237-241 ◽  
Author(s):  
Achanai Buasri ◽  
Teera Sriboonraung ◽  
Kittika Ruangnam ◽  
Pattarapon Imsombati ◽  
Vorrada Loryuenyong
Keyword(s):  
Catalytic Activity ◽  
Waste Material ◽  
Raw Material ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
X Ray ◽  
Environmental Catalyst ◽  
Gas Chromatograph Mass Spectrometry ◽  
Alkali Catalysts

Calcium oxide (CaO) is one of the most promising heterogeneous alkali catalysts since it is cheap, abundantly available in nature, and some of the sources of this compound are renewable (waste material consisting of calcium carbonate (CaCO3)). In this study, the waste enamel venus shell was used as the raw material for CaO catalyst. The calcination of bio-waste was conducted at 900 °C for 2 h. The raw material and the resulting CaO catalyst were characterized using X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning electron microscopy (SEM) and the Brunauer-Emmett-Teller (BET) method. The effects of reaction variables such as reaction time, microwave power, methanol/oil molar ratio, and catalyst loading on the yield of biodiesel were investigated by gas chromatograph-mass spectrometry (GC-MS). From the experimental results, it was found that the CaO catalysts derived from waste material showed good catalytic activity (the conversion of oil of nearly 93%, a very similar catalytic activity with laboratory CaO) and had high potential to be used as biodiesel production catalysts in transesterification of Jatropha Curcas oil with methanol.

Sign in / Sign up

Export Citation Format

Share Document