Development on the Corrosion of Steel Fiber and Prevention in the Ultra-High Performance Concrete (UHPC)

2021 ◽  
Vol 1036 ◽  
pp. 358-370
Author(s):  
Zhen Wen Guo ◽  
Xin Zhi Duan ◽  
Qiang Wang ◽  
Si Jia Wang ◽  
Xiao Lu Guo
Keyword(s):  
High Performance ◽  
Steel Fiber ◽  
High Performance Concrete ◽  
Chloride Ions ◽  
Control Methods ◽  
Ultra High Performance Concrete ◽  
Hybrid Fibers ◽  
Steel Bar ◽  
Corrosion Of Steel

Chloride ions, water, and oxygen could cause the corrosion of steel fiber in the aggressive environment. The corrosion of steel fiber in UHPC is a long-term process and the rate is very slow. As one of the important components of ultra-high performance concrete (UHPC), the corrosion of steel fiber is the result of multiple factors. The characteristics of steel fiber corrosion in UHPC, the factors influencing the corrosion of steel fiber in UHPC (including nanomaterials, curing condition and crack width), and effects of steel fiber corrosion on the UHPC performance (including mechanical properties, matrix rehydration and corrosion of steel bar), are emphatically elaborated. And the control methods of steel fiber corrosion in UHPC are briefly introduced, i.e. hybrid fibers and stainless steel fibers.

Research on Long-Term Expansive Deformation of Steel Fiber Reinforced Expansive Concrete

2009 ◽  
Vol 417-418 ◽  
pp. 945-948
Author(s):  
Huan An He ◽  
You Gang Wang
Keyword(s):  
High Performance ◽  
Steel Fiber ◽  
High Performance Concrete ◽  
Volume Fraction ◽  
Steel Fibers ◽  
Fiber Reinforced ◽  
Fiber Volume ◽  
Expansive Concrete ◽  
Steel Bar

The inherent low tensile strength and shrinkage result in cracking of concrete under work loads. A new way to improve cracking properties is distributing steel fibers into expansive concrete to form a type of composite which is called steel fiber reinforced expansive concrete. This type of high performance concrete could compensate shrinkage as well as improving crack strength. For this concrete, the key point to ensure high performance and safety of concrete structure is to keep a stable expansive deformation during long-term service. A series of tests were carried out to measure long-term restrained expansive deformations of steel fiber reinforced expansive concrete with ages under various restrictions like steel bars and steel fibers. The test investigated some 3-year specimens. For all specimens, test parameters included 2 ratios of steel bar reinforcement, 4 volume fractions of steel fiber and 4 dosages of expansion admixture. The test results showed that the expansion of concrete decreased with increasing of steel bar reinforcing ratio as well as steel fiber volume fraction. In addition, when being in a lower dosage of expansion admixture, the specimens presented remarkable retraction of the expansive deformation. However, when beyond a certain dosage of expansion admixture, the long-term expansive deformation had less change with ages and almost remained the same with 90-day deformation, namely less losses of deformation. Hence, for steel fiber reinforced expansive concrete, using an appropriate dosage of expansion admixture could meet the requirements of designed strengthening and compensating shrinkage.

scholarly journals Tensile Behavior of Hybrid Fiber-Reinforced Ultra-High-Performance Concrete

2021 ◽  
Vol 8 ◽  
Author(s):  
Jiayue Li ◽  
Zongcai Deng
Keyword(s):  
Fracture Energy ◽  
High Performance ◽  
Steel Fiber ◽  
High Performance Concrete ◽  
Strengthening Effect ◽  
Peak Strain ◽  
Fiber Reinforced ◽  
Ultra High Performance Concrete ◽  
Hybrid Fiber ◽  
Hybrid Fibers

Thirty dog bone-shaped specimens were tested to study the effects of steel fiber mixed with seven kinds of non-metallic fibers on the tensile properties of ultra-high-performance concrete (UHPC). Through experiments and micromorphological analysis, the effects of hybrid fibers on the compressive strength, tensile strength, peak strain, fracture energy, and characteristic length of UHPC were analyzed. The results showed that the hybrid fiber-reinforced UHPC showed good ductile failure characteristics, which reflected the good crack resistance and toughening effect of different fibers. The tensile stress–strain curves of UHPC with different hybrid fibers can be divided into two parts: ascending section and softening section, and the softening section was greatly affected by the type and content of fibers. Basalt fiber with a diameter of 0.02 mm had the most obvious strengthening effect on UHPC, and polyvinyl alcohol fiber with a diameter of 0.2 mm and length of 8 mm had the best toughening effect. The mixing of steel fiber and non-metallic fiber cannot only reduce the preparation cost but also improve the fracture energy and toughness of UHPC.

scholarly journals Flexural Strength Evaluation of Reinforced Concrete Members with Ultra High Performance Concrete

2016 ◽  
Vol 2016 ◽  
pp. 1-10 ◽  
Author(s):  
Baek-Il Bae ◽  
Hyun-Ki Choi ◽  
Chang-Sik Choi
Keyword(s):  
Flexural Strength ◽  
High Performance ◽  
Strain Softening ◽  
Steel Fiber ◽  
High Performance Concrete ◽  
High Strength ◽  
Tension Stress ◽  
Compression Stress ◽  
Ultra High Performance Concrete ◽  
Stress Block

Flexural strength evaluation models for steel fiber reinforced ultra high strength concrete were suggested and evaluated with test results. Suggested flexural strength models were composed of compression stress blocks and tension stress blocks. Rectangular stress block, triangular stress block, and real distribution shape of stress were used on compression side. Under tension, rectangular stress block distributed to whole area of tension side and partial area of tension side was used. The last model for tension side is realistic stress distribution. All these models were verified with test result which was carried out in this study. Test was conducted by four-point loading with 2,000 kN actuator for slender beam specimen. Additional verifications were carried out with previous researches on flexural strength of steel fiber reinforced concrete or ultra high strength concrete. Total of 21 test specimens were evaluated. As a result of comparison for flexural strength of section, neutral axis depth at ultimate state, models with triangular compression stress block, and strain-softening type tension stress block can be used as exact solution for ultra high performance concrete. For the conservative and convenient design of section, modified rectangular stress block model can be used with strain softening type tension stress block.

Sign in / Sign up

Export Citation Format

Share Document