Unit Cell Parameters and Densities of the Solid Solution Pd(B)

2000 ◽  
Vol 321-324 ◽  
pp. 604-609 ◽  
Author(s):  
M. Beck ◽  
M. Ellner ◽  
Eric J. Mittemeijer
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Myroslava Horiacha ◽  
Galyna Nychyporuk ◽  
Rainer Pöttgen ◽  
Vasyl Zaremba

Abstract Phase formation in the solid solution TbNiIn1−x Ga x at 873 K was investigated in the full concentration range by means of powder X-ray diffraction and EDX analysis. The samples were synthesized by arc-melting of the pure metals with subsequent annealing at 873 K for one month. The influence of the substitution of indium by gallium on the type of structure and solubility was studied. The solubility ranges have been determined and changes of the unit cell parameters were calculated on the basis of powder X-ray diffraction data: TbNiIn1–0.4Ga0–0.6 (ZrNiAl-type structure, space group P 6 ‾ 2 m $P‾{6}2m$ , a = 0.74461(8)–0.72711(17) and c = 0.37976(5)–0.37469(8) nm); TbNiIn0.2–0Ga0.8–1.0 (TiNiSi-type structure, space group Pnma, а = 0.68950(11)–0.68830(12), b = 0.43053(9)–0.42974(6), с = 0.74186(10)–0.73486(13) nm). The crystal structures of TbNiGa (TiNiSi type, Pnma, a = 0.69140(5), b = 0.43047(7), c = 0.73553(8) nm, wR2=0.0414, 525 F 2 values, 21 variables), TbNiIn0.83(1)Ga0.17(1) (ZrNiAl type, P 6 ‾ 2 m $P‾{6}2m$ , a = 0.74043(6), c = 0.37789(3) nm, wR2 = 0.0293, 322 F 2 values, 16 variables) and TbNiIn0.12(2)Ga0.88(2) (TiNiSi type, Pnma, a = 0.69124(6), b = 0.43134(9), c = 0.74232(11) nm, wR2 = 0.0495, 516 F 2 values, 21 variables) have been determined. The characteristics of the solid solutions and the variations of the unit cell parameters are briefly discussed.


2004 ◽  
Vol 443-444 ◽  
pp. 353-356
Author(s):  
M. Vennström ◽  
Y. Andersson

Pd3P, which crystallises in the cementite, Fe3C-type structure, forms a solid solution with nickel. The crystal structure contains two crystallographically different palladium sites (8d and 4c). Refinements of neutron powder diffraction intensities using the Rietveld method show that all nickel atoms occupy the eight-fold position. The unit cell parameters were refined to a=5.7812(4) Å, b=7.4756(6) Å and c=5.1376(4) Å, for Pd2.7Ni0.3P0.94.


2007 ◽  
Vol 130 ◽  
pp. 97-100 ◽  
Author(s):  
Małgorzata Karolus ◽  
Edward Rówiński ◽  
Eugeniusz Łągiewka

Electrolytical layers of Ni-Mo alloys with polypyrrole, polytiofene and polyethylene were deposited on steel substrate (St3S, 4 cm2). After structural analyses of as quenched samples performed by X-ray diffraction it was noticed that the solid solution of Mo in Ni is observed. After annealing in an argon atmosphere the solid solution of Mo in Ni is becomeing more stable and crystalites are growing to the size of 200 – 300 Å. After annealing in an air atmosphere X-ray diffraction patterns show presence of phases: NiO, MoO, NiCO3, Mo2N. The unit cell parameters of solid solution after annealing are smaller than parameters of as quenched samples what means that the solid solution has been decomposing.


2013 ◽  
Vol 28 (4) ◽  
pp. 269-275
Author(s):  
Sytle M. Antao

Twenty-seven scapolite samples from various localities and with compositions between Me6–93 were obtained using electron microprobe analysis (EMPA). Their unit-cell parameters were obtained using synchrotron high-resolution powder X-ray diffraction (HRPXRD) data and Rietveld structure refinements using space group P42/n. The EMPA data show the well-known discontinuity at Me75. In addition, the unit-cell parameters, especially c, show a discontinuity at Me75 (=five Al atoms per formula unit, apfu), ideally NaCa3[Al5Si7O24](CO3), where the scapolite solid solution is divided into two (Me% = [Ca/(Ca + Na + K)] × 100). A maximum c parameter value occurs at Me37.5 (=four Al apfu ideally), where complete Al–Si, Na–Ca, and Cl–CO3 order occurs. The unit-cell volume, V, varies smoothly with Me% and Al apfu across the series.


Author(s):  
Joanna Kulaszewska ◽  
Sandra Dann ◽  
Peter Warwick ◽  
Caroline Kirk

Mineral phases which can be thought of as members of a metatorbernite–metazeunerite solid solution (Cu(UO 2 ) 2 (PO 4 ) 2− x (AsO 4 ) x .8H 2 O have been identified in radioactive samples from spoil heaps at the uranium mine site in South Terras, Cornwall (grid reference SW935523) . A complete solid solution (0 <  x  < 2) was synthesized by precipitation from solution using uranium (VI) nitrate and copper (II) chloride and phosphoric acid/arsenic acid in the appropriate molar proportions. Refined unit cell parameters determined by Pawley fitting of powder X-ray diffraction data showed a linear variation in the a unit cell parameter according to Vegard's Law, allowing the composition of the natural mineral phases found at South Terras to be determined from measurement of their unit cell parameters. High-resolution variable-temperature synchrotron powder X-ray diffraction studies were carried out at the Diamond Light Source on three members of this solid solution ( x  = 0, 1, 2) and showed different structural behaviour as a function of composition and temperature. Metatorbenite ( x  = 0) retains its tetragonal symmetry at low temperatures and dehydrates to an amorphous phase at 473 K, whereas metazeunrite ( x  = 2) transforms to an orthorhombic phase at low temperatures, regains its tetragonal symmetry on heating to 323 K and undergoes a further transition to an, as yet, unidentified phase at 473 K. This article is part of the theme issue ‘Fifty years of synchrotron science: achievements and opportunities’.


1996 ◽  
Vol 11 (1) ◽  
pp. 2-4
Author(s):  
Mohamed Ezahri ◽  
Georges Coffy ◽  
Bernard F. Mentzen

X-ray powder diffraction data are reported for the [(NH4)3Al1−xFex/2Crx/2(C2O4)3]·3H2O solid solution. The crystal system is triclinic with space group P1. Refined unit-cell parameters are given for the compositions x=0.10, 0.50 and 0.80.


2004 ◽  
Vol 824 ◽  
Author(s):  
John M. Hanchar ◽  
Boris E. Burakov ◽  
Maria V. Zamoryanskaya ◽  
Vladimir M. Garbuzov ◽  
Alexander A. Kitsay ◽  
...  

AbstractIn order to obtain Pu-doped zircon, (Zr,Pu)SiO4, with a maximum Pu content in the form of solid solution, zircon single crystals have been grown using the flux method from starting materials overloaded with Pu. The crystals obtained ranged from 0.2-0.5 to 3.5-4.5 mm in size, are transparent, and characterized by deep pink-brown color. No inclusions of separate Pu phases were observed in the crystals. The distribution of Pu in crystals is zoned and the Pu content varying from approximately 5 to 14 wt.% el. The zircon unit cell parameters calculated from XRD data of bulk powdered sample were: a=6.620(1); c=5.989(2). The results obtained allow us to conclude that the capacity of the zircon structure to incorporate Pu exceeds 10 wt.% el.; however, additional research is required to study the extent of solid solution, (Zr,Pu)SiO4, at higher Pu contents.


2016 ◽  
Vol 4 (15) ◽  
pp. 5730-5736 ◽  
Author(s):  
David N. Miller ◽  
Abdul K. Azad ◽  
Heloise Delpouve ◽  
Lucille Quazuguel ◽  
Jun Zhou ◽  
...  

Solid solution of rocksalt TiO1−xCx showing influence of decreasing defect concentration on the evolution of unit cell parameters.


Author(s):  
I.N. Yadhikov ◽  
S.K. Maksimov

Convergent beam electron diffraction (CBED) is widely used as a microanalysis tool. By the relative position of HOLZ-lines (Higher Order Laue Zone) in CBED-patterns one can determine the unit cell parameters with a high accuracy up to 0.1%. For this purpose, maps of HOLZ-lines are simulated with the help of a computer so that the best matching of maps with experimental CBED-pattern should be reached. In maps, HOLZ-lines are approximated, as a rule, by straight lines. The actual HOLZ-lines, however, are different from the straights. If we decrease accelerating voltage, the difference is increased and, thus, the accuracy of the unit cell parameters determination by the method becomes lower.To improve the accuracy of measurements it is necessary to give up the HOLZ-lines substitution by the straights. According to the kinematical theory a HOLZ-line is merely a fragment of ellipse arc described by the parametric equationwith arc corresponding to change of β parameter from -90° to +90°, wherevector, h - the distance between Laue zones, g - the value of the reciprocal lattice vector, g‖ - the value of the reciprocal lattice vector projection on zero Laue zone.


Author(s):  
Gunnel Karlsson ◽  
Jan-Olov Bovin ◽  
Michael Bosma

RuBisCO (D-ribulose-l,5-biphosphate carboxylase/oxygenase) is the most aboundant enzyme in the plant cell and it catalyses the key carboxylation reaction of photosynthetic carbon fixation, but also the competing oxygenase reaction of photorespiation. In vitro crystallized RuBisCO has been studied earlier but this investigation concerns in vivo existance of RuBisCO crystals in anthers and leaves ofsugarbeets. For the identification of in vivo protein crystals it is important to be able to determinethe unit cell of cytochemically identified crystals in the same image. In order to obtain the best combination of optimal contrast and resolution we have studied different staining and electron accelerating voltages. It is known that embedding and sectioning can cause deformation and obscure the unit cell parameters.


Sign in / Sign up

Export Citation Format

Share Document