Research on Creep Constitutive Model of TC11 Titanium Alloy Based on RBFNN

2008 ◽  
Vol 575-578 ◽  
pp. 1050-1055 ◽  
Author(s):  
Xiang Hua Peng ◽  
Ying She Luo ◽  
Jing Ye Zhou ◽  
Min Yu ◽  
Tao Luo

The paper is aimed to exploit a creep constitutive mode of TC11 titanium alloy based on RBF neural network. Creep testing data of TC11 titanium alloy obtained under the same temperature and different stress are considered as knowledge base and the characteristics of rheological forming of materials and radial basis function neural network (RBFNN) are also combined when exploiting the model. A part of data extracted from knowledge base is divided into two groups: one is learning sample and the other testing sample, which are being performed training, learning and simulating. Then predicting value is compared with the creep testing value and the theoretical value deduced by primary model, which validates that the RBFNN model has higher precision and generalizing ability.

2007 ◽  
Vol 340-341 ◽  
pp. 725-729 ◽  
Author(s):  
Ying She Luo ◽  
Min Yu ◽  
Xiang Hua Peng

The heat rheological forming of the TC11 titanium alloy vane disk has been studied. The dies of rheological forming were 3D-modeled based on UG and the heat rheological forming of the TC11 titanium alloy under a certain temperature and a low strain rate was analyzed by DEFORM 3D based on variation principle of rigid viscoplastic non-compressed material. A series of results including rheological forming procedure, equivalent strain field, temperature field and load-stroke curves of punch and cavity die, were obtained by finite element method. The deformation characteristic of the TC11 titanium alloy was well known and its heat rheological forming process and parameters were determined. Moreover, the local underfilled phenomenon in practical manufacture was predicted and analyzed, and we found that the defects could be restricted by reducing the forming velocity.


Author(s):  
Renqiang Wang ◽  
Qinrong Li ◽  
Shengze Miao ◽  
Keyin Miao ◽  
Hua Deng

Abstract: The purpose of this paper was to design an intelligent controller of ship motion based on sliding mode control with a Radial Basis Function (RBF) neural network optimized by the genetic algorithm and expansion observer. First, the improved genetic algorithm based on the distributed genetic algorithm with adaptive fitness and adaptive mutation was used to automatically optimize the RBF neural network. Then, with the compensation designed by the RBF neural network, anti-saturation control was realized. Additionally, the intelligent control algorithm was introduced by Sliding Mode Control (SMC) with the stability theory. A comparative study of sliding mode control integrated with the RBF neural network and proportional–integral–derivative control combined with the fuzzy optimization model showed that the stabilization time of the intelligent control system was 43.75% faster and the average overshoot was reduced by 52% compared with the previous two attempts. Background: It was known that the Proportional-Integral-Derivative (PID) control and self-adaptation control cannot really solve the problems of frequent disturbance from external wind and waves, as well as the problems with ship nonlinearity and input saturation. So, the previous ship motion controller should be transformed by advanced intelligent technology, on the basis of referring to the latest relevant patent design methods. Objective: An intelligent controller of ship motion was designed based on optimized Radial Basis Function Neural Network (RBFNN) in the presence of non-linearity, uncertainty, and limited input. Methods: The previous ship motion controller was remodeled based on Sliding Mode Control (SMC) with RBFNN optimized by improved genetic algorithm and expansion observer. The intelligent control algorithm integrated with genetic neural network solved the problem of system model uncertainty, limited control input, and external interference. Distributed genetic with adaptive fitness and adaptive mutation method guaranteed the adequacy of search and the global optimal convergence results, which enhanced the approximation ability of RBFNN. With the compensation designed by the optimized RBFNN, it was realized anti-saturation control. The chattering caused by external disturbance in SMC controller was reduced by the expansion observer. Results: A comparative study with RBFNN-SMC control and fuzzy-PID control, the stabilization time of the intelligent control system was 43.75% faster, the average overshoot was reduced by 52%, compared to the previous two attempts. Conclusion: The intelligent control algorithm succeed in dealing with the problems of nonlinearity, uncertainty, input saturation, and external interference. The intelligent control algorithm can be applied into research and development ship steering system, which would be created a new patent.


Sign in / Sign up

Export Citation Format

Share Document