Investigation of Nitrogen Containing Austenitic Stainless Steel

2020 ◽  
Vol 989 ◽  
pp. 152-159
Author(s):  
Alexander N. Maznichevsky ◽  
Radii V. Sprikut ◽  
Yuri N. Goikhenberg
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Steel Corrosion ◽  
Strength Properties ◽  
Austenitic Steels ◽  
Strength Increase ◽  
Low Carbon ◽  
Aisi 304L ◽  
Nitrogen Alloying ◽  
Austenite Grains

An important factor in solving the problem of stainless steel corrosion resistance is carbon concentration reduction. However, a decrease in carbon content of austenitic steels leads to a drop in level of their strength properties. Theoretically, nitrogen alloying can lead to a strength increase in all types of austenitic corrosion-resistant steels. Practically, nitrogen alloying is effectively only with low-carbon compositions. This work shows the effect of nitrogen on the mechanical properties of middle-alloying nitrogen, containing stainless steel, and a study of AISI 304L and pilot steel with different nitrogen content (from 0.16 to 0.30 wt. %). Nitrogen increases strength of steel, which is approximately 30-60% higher than for steel without nitrogen, but reduces technological plasticity. Pilot steels show high corrosion resistance and fine austenite grains.

A Review on Welding of AISI 304L Austenitic Stainless Steel

2014 ◽  
Vol 14 (1) ◽  
pp. 1-11 ◽  
Author(s):  
Kondapalli Siva Prasad ◽  
Chalamalasetti Srinivasa Rao ◽  
Damera Nageswara Rao
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Austenitic Stainless Steel ◽  
Carbide Precipitation ◽  
Optimum Combination ◽  
Low Carbon ◽  
Aisi 304L ◽  
Mechanical Switch ◽  
Welding Processes ◽  
Strength And Ductility

AbstractAISI 304L is an austenitic Chromium-Nickel stainless steel offering the optimum combination of corrosion resistance, strength, and ductility. These attributes make it a favorite for many mechanical switch components. The low carbon content reduces susceptibility to carbide precipitation during welding. In the present paper a thorough review on welding of AISI 304L austenitic Stainless Steel by various welding processes was made. From the review it is understood that AISI 304L austenitic Stainless Steel is the best material where there is a problem of intergranular corrosion. Also it is one of the best materials frequently used in manufacturing non heat treatable components.

ATI 441 ALLOY

Alloy Digest ◽  
2013 ◽  
Vol 62 (7) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Exhaust System ◽  
Low Carbon ◽  
Temperature Performance ◽  
System Components ◽  
Low Nitrogen

Abstract ATI 441 is a low-carbon and low-nitrogen ferritic stainless steel with 18 Cr and columbium. The alloy is typically used for exhaust system components. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming. Filing Code: SS-1150. Producer or source: Allegheny Technologies Inc..

NIROSTA 4429

Alloy Digest ◽  
2000 ◽  
Vol 49 (5) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Pitting Corrosion ◽  
Intergranular Corrosion ◽  
Heat Treating ◽  
Low Carbon ◽  
High Nitrogen ◽  
Temperature Performance ◽  
Pitting Corrosion Resistance

Abstract Nirosta 4429 is a low-carbon, high-nitrogen version of type 316 stainless steel. The low carbon imparts intergranular corrosion resistance while the nitrogen imparts both higher strength and some increased pitting corrosion resistance. It is recommended for use as welded parts that need not or cannot be annealed after welding. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-787. Producer or source: ThyssenKrupp Nirosta.

VALINOX VLX 439L

Alloy Digest ◽  
1992 ◽  
Vol 41 (6) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
Fresh Water ◽  
Stress Corrosion Cracking ◽  
Heat Treating ◽  
Low Carbon ◽  
Boiler Water

Abstract VALINOX VLX 439L is a ferritic stainless steel with 18% chromium, low carbon, and titanium stabilization to present an entirely ferritic structure; resistance to corrosion in fresh water, boiler water, and cooling waters; and an almost freedom from stress-corrosion cracking problems due to chlorinated water. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming and heat treating. Filing Code: SS-531. Producer or source: Vallourec Inc..

CLC 18.10LN

Alloy Digest ◽  
2006 ◽  
Vol 55 (1) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Stainless Steels ◽  
The Other ◽  
Low Carbon ◽  
Good Corrosion Resistance ◽  
Temperature Performance

Abstract CLC 18.10LN is an austenitic stainless steel with 18% Cr, 9.5% Ni, and 0.14% N to provide good corrosion resistance at strengths above the other low-carbon stainless steels. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, machining, and joining. Filing Code: SS-950. Producer or source: Industeel USA, LLC.

ALLEGHENY STAINLESS TYPE 434

Alloy Digest ◽  
1974 ◽  
Vol 23 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Heat Treating ◽  
Low Carbon ◽  
Good Corrosion Resistance ◽  
Temperature Performance ◽  
Continuous Service ◽  
Oxidation Resistant ◽  
Corrosive Environments

Abstract ALLEGHENY STAINLESS TYPE 434 is a low-carbon ferritic stainless steel with good corrosion resistance to mildly corrosive environments and the atmosphere. It is oxidation resistant at temperatures up to 1600 F for intermittent service and up to 1450-1500 F for continuous service. It is used for automotive trim and other exterior environments. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-292. Producer or source: Allegheny Ludlum Corporation.

SANDVIK 2RE10

Alloy Digest ◽  
1972 ◽  
Vol 21 (5) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Nitric Acid ◽  
High Resistance ◽  
Heat Treating ◽  
Low Carbon ◽  
High Chromium ◽  
Temperature Performance ◽  
High Nickel

Abstract SANDVIK 2RE10 is a high-chromium, high-nickel, extra-low-carbon austenitic stainless steel with high resistance to oxidizing media such as concentrated nitric acid, high resistance to intergranular corrosion and good structural stability. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-272. Producer or source: Sandvik. See also Alloy Digest SS-491, November 1987.

ALLEGHENY LUDLUM TYPE 205

Alloy Digest ◽  
1997 ◽  
Vol 46 (10) ◽  
Keyword(s):  
Mechanical Properties ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Magnetic Permeability ◽  
Cold Working ◽  
High Strength ◽  
Heat Treating ◽  
Austenitic Steels

Abstract Allegheny Stainless Type 205 is a chromium-manganese nitrogen austenitic high strength stainless steel that maintains its low magnetic permeability even after large amounts of cold working. Annealed Type 205 has higher mechanical properties than any of the conventional austenitic steels-and for any given strength level, the ductility of Type 205 is comparable to that of Type 301. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fatigue. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SS-640. Producer or source: Allegheny Ludlum Corporation. Originally published March 1996, revised October 1997.

AISI TYPE 416 and 416Se

Alloy Digest ◽  
1964 ◽  
Vol 13 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
Low Carbon ◽  
Steel Mills ◽  
Temperature Performance ◽  
Aisi Type ◽  
Type Stainless Steel

Abstract AISI Types 416 and 416Se are free-maching grades of the low-carbon chromium type stainless steel. The former contains sulfur while the latter contains selenium to produce the free-cutting characteristics. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness, creep, and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-162. Producer or source: Stainless steel mills.

AVESTA STAINLESS 119

Alloy Digest ◽  
1985 ◽  
Vol 34 (11) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Low Carbon

Abstract AVESTA STAINLESS 119 is a hardenable duplex (martensite-austenite), low-carbon stainless steel with superior weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as heat treating, machining, and joining. Filing Code: SS-466. Producer or source: Avesta Stainless Inc..

Sign in / Sign up

Export Citation Format

Share Document