Direct Aerosol Printing of Lithium-ion Batteries

2017 ◽  
Vol 2017 (1) ◽  
pp. 000391-000397 ◽  
Author(s):  
Xiaowei Yu ◽  
I-Meng Chen ◽  
Susmita Sarkar ◽  
Jonghyun Park ◽  
Heng Pan ◽  
...  
Keyword(s):  
Lithium Ion Batteries ◽  
Lithium Ion ◽  
Li Ion Battery ◽  
Active Materials ◽  
Polymer Substrates ◽  
Aerosol Printing ◽  
Jet Printing ◽  
Li Ion ◽  
Aerosol Jet Printing ◽  
First Time

Abstract Recently, additive manufacturing (AM) has brought new opportunities to the manufacturing of lithium-ion batteries (LIBs). In this study, aerosol jet printing, as a branch of AM technologies was demonstrated to fabricate lithium-ion batteries for the first time. Printable inks of two pairs of active materials for cathode and anode were developed. The effect of ink composition on the printing characteristics was studied. The developed inks were printed into Li-ion battery electrodes with specific capacities comparable to conventional slurry cast electrodes. Next, to demonstrate fully-printed electrodes, gold and copper inks were printed on top of polymer substrates and thermal/flash sintered as the current collectors for cathode and anode.

Enhancing Co/Co2VO4 Li-ion Battery Anode Performances via 2D-2D Heterostructure Engineering

Nanoscale ◽  
2021 ◽  
Author(s):  
Kun Wang ◽  
Yongyuan Hu ◽  
Jian Pei ◽  
Fengyang Jing ◽  
Zhongzheng Qin ◽  
...  
Keyword(s):  
Lithium Ion Batteries ◽  
Anode Material ◽  
Output Voltage ◽  
High Capacity ◽  
Lithium Ion ◽  
Li Ion Battery ◽  
Li Ion ◽  
Battery Anode

High capacity Co2VO4 becomes a potential anode material for lithium ion batteries (LIBs) benefiting from its lower output voltage during cycling than other cobalt vanadates. However, the application of this...

scholarly journals Lithium-Ion Batteries: Graphene Sandwiched Mesostructured Li-Ion Battery Electrodes (Adv. Mater. 35/2016)

2016 ◽  
Vol 28 (35) ◽  
pp. 7695-7695 ◽  
Author(s):  
Jinyun Liu ◽  
Qiye Zheng ◽  
Matthew D. Goodman ◽  
Haoyue Zhu ◽  
Jinwoo Kim ◽  
...  
Keyword(s):  
Lithium Ion Batteries ◽  
Lithium Ion ◽  
Li Ion Battery ◽  
Li Ion

One pot hydrothermal synthesis of graphene like MoS2 nanosheets for application in high performance lithium ion batteries

RSC Advances ◽  
2015 ◽  
Vol 5 (71) ◽  
pp. 57666-57670 ◽  
Author(s):  
Chandrasekar Perumal Veeramalai ◽  
Fushan Li ◽  
Hongyuan Xu ◽  
Tae Whan Kim ◽  
Tailiang Guo
Keyword(s):  
Hydrothermal Synthesis ◽  
Lithium Ion Batteries ◽  
High Performance ◽  
Lithium Ion ◽  
Li Ion Battery ◽  
Mos2 Nanosheets ◽  
Excellent Performance ◽  
One Pot ◽  
Li Ion ◽  
Battery Anode

The excellent performance of hydrothermally synthesized MoS2 few layer nanosheets as a Li-ion battery anode material is demonstrated.

Multi-slice nanostructured WS2@rGO with enhanced Li-ion battery performance and a comprehensive mechanistic investigation

2015 ◽  
Vol 17 (44) ◽  
pp. 29824-29833 ◽  
Author(s):  
Honglin Li ◽  
Ke Yu ◽  
Hao Fu ◽  
Bangjun Guo ◽  
Xiang Lei ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Lithium Ion Batteries ◽  
Lithium Ion ◽  
Reversible Capacity ◽  
Hybrid Structure ◽  
Li Ion Battery ◽  
Cycle Stability ◽  
Reduced Graphene ◽  
Mechanistic Investigation ◽  
Li Ion

We studied the WS2 and reduced graphene oxide hybrid structure for use as anode material in lithium ion batteries. The composite delivered a significant enhanced reversible capacity and cycle stability compared with pristine WS2.

scholarly journals In situ fabrication of a graphene-coated three-dimensional nickel oxide anode for high-capacity lithium-ion batteries

RSC Advances ◽  
2018 ◽  
Vol 8 (14) ◽  
pp. 7414-7421 ◽  
Author(s):  
Chiwon Kang ◽  
Eunho Cha ◽  
Sang Hyub Lee ◽  
Wonbong Choi
Keyword(s):  
Nickel Oxide ◽  
Lithium Ion Batteries ◽  
Three Dimensional ◽  
High Capacity ◽  
Lithium Ion ◽  
Li Ion Battery ◽  
In Situ Fabrication ◽  
Li Ion ◽  
Oxide Anode

The processing of graphene coated NiO–Ni anode using one CVD system delivered high Li-ion battery performance.

A novel strategy for the synthesis of highly stable ternary SiOx composites for Li-ion-battery anodes

2019 ◽  
Vol 7 (26) ◽  
pp. 15969-15974 ◽  
Author(s):  
Xiaotian Guo ◽  
Yi-Zhou Zhang ◽  
Fan Zhang ◽  
Qing Li ◽  
Dalaver H. Anjum ◽  
...  
Keyword(s):  
Lithium Ion Batteries ◽  
High Performance ◽  
Lithium Ion ◽  
Li Ion Battery ◽  
Nitrogen Doped ◽  
Li Ion ◽  
Novel Strategy ◽  
Nitrogen Doped Carbon

A facile method is used to prepare a series of high-performance Ni/SiOx/nitrogen-doped carbon ternary anodes for lithium-ion batteries.

Bamboo leaf derived ultrafine Si nanoparticles and Si/C nanocomposites for high-performance Li-ion battery anodes

Nanoscale ◽  
2015 ◽  
Vol 7 (33) ◽  
pp. 13840-13847 ◽  
Author(s):  
Lei Wang ◽  
Biao Gao ◽  
Changjian Peng ◽  
Xiang Peng ◽  
Jijiang Fu ◽  
...  
Keyword(s):  
Lithium Ion Batteries ◽  
High Performance ◽  
Lithium Ion ◽  
Li Ion Battery ◽  
Bamboo Leaves ◽  
Si Nanoparticles ◽  
Li Ion

Ultrafine Si nanoparticles and Si@C/RGO nanocomposites are produced from bamboo leaves and show promising applications in lithium ion batteries.

Crumpled N-doped carbon nanotubes encapsulated with peapod-like Ge nanoparticles for high-rate and long-life Li-ion battery anodes

2016 ◽  
Vol 4 (20) ◽  
pp. 7585-7590 ◽  
Author(s):  
Kaifu Huo ◽  
Lei Wang ◽  
Changjian Peng ◽  
Xiang Peng ◽  
Yuanyuan Li ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Lithium Ion Batteries ◽  
High Performance ◽  
High Capacity ◽  
Rate Capability ◽  
Lithium Ion ◽  
High Rate ◽  
Li Ion Battery ◽  
Li Ion ◽  
Long Life

Peapod-like Ge/CNx is designed as a high-performance anode for lithium-ion batteries, which boasts high capacity, excellent cyclability and rate capability.

A new method to prepare vanadium oxide nano-urchins as a cathode for lithium ion batteries

RSC Advances ◽  
2015 ◽  
Vol 5 (59) ◽  
pp. 47522-47528 ◽  
Author(s):  
Jichao Wang ◽  
Chaojun Cui ◽  
Guohua Gao ◽  
Xiaowei Zhou ◽  
Jiandong Wu ◽  
...  
Keyword(s):  
Vanadium Oxide ◽  
Lithium Ion Batteries ◽  
Lithium Ion ◽  
New Method ◽  
Li Ion Battery ◽  
Li Ion ◽  
Vanadium Oxide Nanotubes

Urchin-like vanadium oxide nanotubes clusters and post-annealed clusters synthesized by a new method acted as the cathodes for Li-ion battery.

Crystalline Cu-silicide stabilizes the performance of a high capacity Si-based Li-ion battery anode

2016 ◽  
Vol 4 (48) ◽  
pp. 19140-19146 ◽  
Author(s):  
Wenqing Ma ◽  
Xizheng Liu ◽  
Xi Wang ◽  
Zhifeng Wang ◽  
Ruie Zhang ◽  
...  
Keyword(s):  
Lithium Ion Batteries ◽  
High Capacity ◽  
Lithium Ion ◽  
Li Ion Battery ◽  
Metal Silicides ◽  
Li Ion ◽  
Battery Anode

Metal-silicides have demonstrated bright prospects as advanced anodes for lithium-ion batteries (LIBs).

Sign in / Sign up

Export Citation Format

Share Document