scholarly journals Die ontwikkeling van ’n opleidingsmikrobeheerder vir nie - elektroniese ingenieurs

1997 ◽  
Vol 16 (3) ◽  
pp. 135-139
Author(s):  
A. J. Lubbe
Keyword(s):  
Personal Computer ◽  
Engineering Students ◽  
Communication Protocol ◽  
Control Programme ◽  
Industrial Engineering ◽  
Training Requirements ◽  
University Of Pretoria ◽  
The University

During training of Industrial engineering students at the University of Pretoria it was realized that no suitable micro controller system for the training of non-electronic engineers in the application of micro controllers was locally available. A micro controller system which complies with the unique training requirements of non-electronic engineers was developed. The systems were made availcdyle to the students during training and after two years in use, the design was revised and the deficiencies corrected. A software control programme was developed that combines into one, all the different programmes needed to programme the micro controller Software was also written fo r the controller which handles the communication protocol between the personal computer and the micro controller.

scholarly journals Evasion of Industrial Engineering students of FT/UFAM

2019 ◽  
Vol 7 (10) ◽  
pp. 551-564
Author(s):  
Jéssica Barbosa Da Silva ◽  
Jonas Gomes da Silva
Keyword(s):  
Engineering Students ◽  
Industrial Engineering ◽  
Electronic Questionnaire ◽  
First Semester ◽  
Vocational Orientation ◽  
The University ◽  
E Mail

The undergraduate degree in Industrial Engineering at the Faculty of Technology (FT) of the Federal University of Amazonas (UFAM) completed 15 years in the first semester of 2019. During this period, enrolled 837 students, of which 238 (28%) have already graduated, 335 (40 %) continue to study and 263 (32%) have left the course. Given this percentage of dropout and the need to research more about the topic, this article aims to investigate the main causes of abandonment in this course in order to propose strategies to minimize the problem. The method used was the Survey, which applied a five-part electronic questionnaire sent to 203 dropout students who had e-mail. After analyzing the answers of 39 (19.21%), it was concluded that most students did not receive vocational orientation before joining the University and the main reasons that influenced the students to quit the course were the didactic-pedagogical deficiency of the teachers, the difficulty in conciliating study and work, and the course did not satisfy their expectations.

scholarly journals Integration of Environmental Management in an industrial and logistic engineer course in Morocco

2018 ◽  
Author(s):  
SAFIA LAMRANI
Keyword(s):  
Environmental Management ◽  
Waste Management ◽  
Communication Skills ◽  
Engineering Students ◽  
Technical Aspect ◽  
Industrial Engineering ◽  
Real Case ◽  
Project Approach ◽  
The University

This work describes a real case study of integration of Environmental Management in the training of State engineers in Industrial and Logistics Engineering, from the National Superior School of Electricity and Mechanics (ENSEM) in Casablanca to Morocco. The study focused on the particular aspect of waste management within the university institution. The principle adopted is mainly that of 3R (Reduction; Reuse; Recycling). The project approach was adopted. In addition to the technical aspect, the acquisition, by the engineering students, of managerial and communication skills was made possible thanks to this approach. A multitude of tools inspired by industrial engineering and logistics techniques have been deployed in response to the problems encountered in the field.

scholarly journals Analysis of Learning Motivation in Industrial Engineering Teaching in University of Extremadura (Spain)

2020 ◽  
Vol 12 (12) ◽  
pp. 4987
Author(s):  
Gonzalo Sánchez-Barroso ◽  
Jaime González-Domínguez ◽  
Justo García-Sanz-Calcedo ◽  
Francisco Zamora-Polo
Keyword(s):  
Engineering Students ◽  
Industrial Engineering ◽  
Fear Of Failure ◽  
Teaching Methodologies ◽  
Homogeneous Groups ◽  
Training Stage ◽  
Motivation For Learning ◽  
High Motivation ◽  
High Level ◽  
The University

Motivational orientations predispose and condition behaviour, and determine the degree of assimilation of concepts by students during their training stage. Knowing them allows professors to conduct their lessons in order to favour maximum achievement for students. The objective of this work is to evaluate the motivation that guides the learning process of Industrial Engineering students at the University of Extremadura (Spain). About three quarters of the students present a high motivation for learning; half of them tend to be result-oriented and less than 10% show a high level of fear of failure. Homogeneous groups were formed based on the level of each dimension, and influential teaching methodologies were discussed. Therefore, it is possible to create a context that favors the acquisition of knowledge by students according to their motivations, and thus achieve maximum academic performance from them. The results shown here may be interesting for the design of promotional activities for SDGs in the university context.

Engineering for good: A case of community driven engineering innovation

2018 ◽  
Vol 6 (1) ◽  
Author(s):  
Chinweike Eseonu ◽  
Martin A Cortes
Keyword(s):  
Engineering Students ◽  
Technology Innovation ◽  
Local Communities ◽  
First Year ◽  
Engineering Curriculum ◽  
Engineering Design Process ◽  
The World ◽  
The University ◽  
Social Consideration

There is a culture of disengagement from social consideration in engineering disciplines. This means that first year engineering students, who arrive planning to change the world through engineering, lose this passion as they progress through the engineering curriculum. The community driven technology innovation and investment program described in this paper is an attempt to reverse this trend by fusing community engagement with the normal engineering design process. This approach differs from existing project or trip based approaches – outreach – because the focus is on local communities with which the university team forms a long-term partnership through weekly in-person meetings and community driven problem statements – engagement.

scholarly journals Compartmental Learning versus Joint Learning in Engineering Education

Mathematics ◽  
2021 ◽  
Vol 9 (6) ◽  
pp. 662
Author(s):  
María Jesús Santos ◽  
Alejandro Medina ◽  
José Miguel Mateos Roco ◽  
Araceli Queiruga-Dios
Keyword(s):  
Engineering Students ◽  
Chemical Engineering ◽  
Linear Equations ◽  
Mathematical Software ◽  
Mathematical Concepts ◽  
Joint Learning ◽  
The University ◽  
Academic Year ◽  
Non Linear Equations ◽  
Mathematics And Physics

Sophomore students from the Chemical Engineering undergraduate Degree at the University of Salamanca are involved in a Mathematics course during the third semester and in an Engineering Thermodynamics course during the fourth one. When they participate in the latter they are already familiar with mathematical software and mathematical concepts about numerical methods, including non-linear equations, interpolation or differential equations. We have focused this study on the way engineering students learn Mathematics and Engineering Thermodynamics. As students use to learn each matter separately and do not associate Mathematics and Physics, they separate each matter into different and independent compartments. We have proposed an experience to increase the interrelationship between different subjects, to promote transversal skills, and to make the subjects closer to real work. The satisfactory results of the experience are exposed in this work. Moreover, we have analyzed the results obtained in both courses during the academic year 2018–2019. We found that there is a relation between both courses and student’s final marks do not depend on the course.

scholarly journals A Simple but Efficient Concept of Blended Teaching of Mathematics for Engineering Students during the COVID-19 Pandemic

2021 ◽  
Vol 11 (2) ◽  
pp. 56
Author(s):  
Saray Busto ◽  
Michael Dumbser ◽  
Elena Gaburro
Keyword(s):  
Facial Expressions ◽  
Engineering Students ◽  
Video Quality ◽  
Lecture Hall ◽  
Ex Post ◽  
Teaching Of Mathematics ◽  
Online Streaming ◽  
The University ◽  
Blended Teaching

In this article we present a case study concerning a simple but efficient technical and logistic concept for the realization of blended teaching of mathematics and its applications in theoretical mechanics that was conceived, tested and implemented at the Department of Civil, Environmental and Mechanical Engineering (DICAM) of the University of Trento, Italy, during the COVID-19 pandemic. The concept foresees traditional blackboard lectures with a reduced number of students physically present in the lecture hall, while the same lectures are simultaneously made available to the remaining students, who cannot be present, via high-quality low-bandwidth online streaming. The case study presented in this paper was implemented in a single University Department and was carried out with a total of n=1011 students and n=68 professors participating in the study. Based on our first key assumption that traditional blackboard lectures, including the gestures and the facial expressions of the professor, are even nowadays still a very efficient and highly appreciated means of teaching mathematics at the university, this paper deliberately does not want to propose a novel pedagogical concept of how to teach mathematics at the undergraduate level, but rather presents a technical concept of how to preserve the quality of traditional blackboard lectures even during the COVID-19 pandemic and how to make them available to the students at home via online streaming with adequate audio and video quality even at low internet bandwidth. The second key assumption of this paper is that the teaching of mathematics is a dynamic creative process that requires the physical presence of students in the lecture hall as audience so that the professor can instantaneously fine-tune the evolution of the lecture according to his/her perception of the level of attention and the facial expressions of the students. The third key assumption of this paper is that students need to have the possibility to interact with each other personally, especially in the first years at the university. We report on the necessary hardware, software and logistics, as well as on the perception of the proposed blended lectures by undergraduate students from civil and environmental engineering at the University of Trento, Italy, compared to traditional lectures and also compared to the pure online lectures that were needed as emergency measure at the beginning of the COVID-19 pandemic. The evaluation of the concept was carried out with the aid of quantitative internet bandwidth measurements, direct comparison of transmitted video signals and a careful analysis of ex ante and ex post online questionnaires sent to students and professors.

Sign in / Sign up

Export Citation Format

Share Document