scholarly journals Comparative evaluation of demineralization of radicular dentin with 17% ethylenediaminetetraacetic acid, 10% citric acid, and MTAD at different time intervals: An in vitro study

2016 ◽  
Vol 6 (1) ◽  
pp. 44 ◽  
Author(s):  
Jitendra Lohar ◽  
Yogender Kumar ◽  
Sureka Bhat ◽  
Manisha Bhati ◽  
Aanesh Gandhi ◽  
...  
Keyword(s):  
Citric Acid ◽  
Comparative Evaluation ◽  
Ethylenediaminetetraacetic Acid ◽  
In Vitro Study ◽  
Vitro Study ◽  
Time Intervals

scholarly journals A Comparative Evaluation of Six Commonly used Types of Die Materials for the Property of Abrasion Resistance, at Two Time Intervals: An in vitro Study

2013 ◽  
Vol 3 (1) ◽  
pp. 1-6
Author(s):  
Sattyam V Wankhade ◽  
Kaushal V Sanghavi ◽  
Vilas Rajguru ◽  
Jyoti Lokade
Keyword(s):  
Abrasion Resistance ◽  
Comparative Evaluation ◽  
In Vitro Study ◽  
Vitro Study ◽  
Time Intervals ◽  
Type Iv ◽  
Die Materials ◽  
Die Material ◽  
Type V

ABSTRACT Background and objectives This in vitro study evaluated and compared the abrasion resistance of types IV and V gypsums, resin-modified type IV and type V gypsums, synthetic gypsum, and epoxy resin die material at two different time intervals spanning a period of 24 hours. Materials and methods A total of 10 dies of each die material were fabricated and tested for abrasion resistance at each time interval. An average of five readings was taken for the test, measuring the rate of abrasion of the materials. Results All the tested properties of the epoxy resin material were far superior to those of the other materials (being tested). Resin-modified type IV gypsum had significantly better abrasion resistance than its type V counterpart at setting. However, when tested at 24 hours, both materials had comparable resistance to abrasion, which was the highest among the gypsum-based materials. Interpretation and conclusion Epoxy die resin had the most superior physical properties of all. A significant decrease in the rate of abrasion (-38 to -83%) was noted, when the gypsumbased products were tested at 24 hours. From the data obtained in this study, it is recommended that when gypsum-based materials are used, to wait at least 24 hours prior to separating casts from impressions (and subsequent laboratory procedures) to avoid damage to the casts and dies. Abbreviations RR IV: Resin modified type IV gypsum; RR V: Resin modified type V gypsum; S: Synthetic gypsum; V: Type V gypsum; IV: Type IV gypsum. How to cite this article Wankhade SV, Sanghavi KV, Rajguru V, Lokade J. A Comparative Evaluation of Six Commonly used Types of Die Materials for the Property of Abrasion Resistance, at Two Time Intervals: An in vitro Study. Int J Prosthodont Restor Dent 2013;3(1):1-6.

scholarly journals Effect of Citric Acid on Color Changes of Calcium Silicate-Based Cements an In Vitro Study

2021 ◽  
Vol 11 (5) ◽  
pp. 2339
Author(s):  
Joanna Metlerska ◽  
Till Dammaschke ◽  
Mariusz Lipski ◽  
Irini Fagogeni ◽  
Anna Machoy-Mokrzyńska ◽  
...  
Keyword(s):  
Citric Acid ◽  
Calcium Silicate ◽  
In Vitro Study ◽  
Vitro Study ◽  
Color Measurement ◽  
Color Changes ◽  
Naked Eye ◽  
Root Canal Irrigants ◽  
The Difference

The aim of the present in vitro study was to investigate the effects of 10% and 40% citric acid (CA) on the color of calcium silicate–based cements (CSCs) in comparison to the effects of common root canal irrigants. Samples of six CSCs (n = 6)—ProRoot MTA (Dentsply, Tulsa, OK, USA), Biodentine (Septodont, Saint-Maur-des-Fossés, France), MTA Plus (Avalon Biomed Inc, by Prevest Denpro Limited, Jammu, India), MTA Repair HP (Angelus, Londrina, PR, Brazil), Ortho MTA (BioMTA, Seoul, Korea), and Retro MTA (BioMTA, Seoul, Korea)—were immersed in 10% and 40% CA as well as 15% EDTA, 2% NaOCl, 2% CHX, and 0.9% NaCl for 15 min, 1 h, and 24 h. ΔE values, representing the difference between the final and baseline values of the color components, were then determined using a VITA Easyshade Compact 5.0 spectrophotometer. Naked-eye evaluation of the changes in color and structures of the materials was performed using our own scale. Upon immersion of the materials in both 10% and 40% CA, there were statistically significant differences between spectrophotometric color measurement results for all CSCs (P < 0.05). However, CA does not cause dark discoloration, observable with the naked eye, of any of the materials, such as NaOCl and CHX. Significant statistical differences were also found between all CSCs in terms of submersion duration (P < 0.05). CA, which could be an alternative to EDTA use, caused greater CSCs discoloration and changed some of their structures. Unless required by the therapeutic procedure, clinicians should pay attention to the fact that the irrigant may affect the CSCs discoloration and minimize the contact time of irrigant with CSCs.

Sign in / Sign up

Export Citation Format

Share Document