scholarly journals Effect of adhesion boosters on the shear bond strength of new brackets bonded to a debonded tooth surface – An In vitro study

2020 ◽  
Vol 11 (1) ◽  
pp. 46
Author(s):  
Vidya Madaparambil ◽  
Vincy Antony ◽  
Vineeth Menon ◽  
Mohamed Nayaz ◽  
GazanaferRoshan Mohamed Jasim
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
In Vitro Study ◽  
Vitro Study ◽  
Tooth Surface

scholarly journals Indirect versus Direct Bonding—A Shear Bond Strength Comparison: An in vitro Study

2011 ◽  
Vol 12 (4) ◽  
pp. 232-238 ◽  
Author(s):  
Vinaya S Pai ◽  
S Nandini ◽  
M Swetha ◽  
N Sanjay
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
In Vitro Study ◽  
Adhesive System ◽  
Vitro Study ◽  
Tooth Surface ◽  
Indirect Bonding ◽  
Significant Difference ◽  
Bonding Technique

ABSTRACT Aim The process of bonding orthodontic appliances to the enamel surface of the teeth has come to the forefront as a major improvement in bonding techniques. The purpose of this study is to compare the shear bond strength of stainless steel orthodontic brackets bonded using conventional direct bonding and indirect bonding as described by Thomas. Materials and methods Forty sound human premolars were divided into two groups of 20 each. Group I samples were bonded directly on the tooth surface using concise two paste adhesive system after etching and drying. Group II samples were bonded indirectly on the tooth surface according to Thomas indirect bonding technique using concise two paste adhesive system. The stored specimen was tested for shear bond strength in an Instron universal testing machine at a crosshead speed of 0.5 mm/minute. Data obtained were subjected to statistical analysis. Results The results showed that there was no statistically significant difference in the shear bond strength between direct and indirect bonding techniques. Chi-square test showed that there were significant differences among the adhesive remnant index scores between direct and indirect bonding groups. Conclusion In vitro shear bond strength comparison between direct and indirect-bonded attachments showed no significant difference between the two groups. Bond strength obtained with Thomas indirect bonding technique was comparable with direct bonding technique. Clinical significance Thomas indirect bonding technique can be used for bonding of the posterior teeth, where the risk of moisture contamination is high during bonding. How to cite this article Swetha M, Pai VS, Sanjay N, Nandini S. Indirect versus Direct Bonding—A Shear Bond Strength Comparison: An in vitro Study. J Contemp Dent Pract 2011; 12(4):232-238.

scholarly journals Comparison of shear bond strength of orthodontic bracket bonding to teeth using light-curing units between halogen and LED: An in vitro study

2019 ◽  
Vol 45 (1) ◽  
pp. 17-22
Author(s):  
Md Kamal Abdullah ◽  
Tanzila Rafique ◽  
Ashis Kumar Biswas ◽  
Ranjit Ghosh ◽  
Md Abdul Gafur ◽  
...  
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
In Vitro Study ◽  
Vitro Study ◽  
Tooth Surface ◽  
Advantages And Disadvantages ◽  
Adhesive Remnant Index ◽  
Halogen Light ◽  
Light Curing

Background: Light-cured bonding systems have been widely accepted among orthodontists. Various light curing units are available now. Recently, the light emitting diode (LED) has been introduced alongside halogen light curing units. There is lack of information on the advantages and disadvantages of different light curing systems. The aim of this in vitro study was to compare the shear bond strength of orthodontic brackets and adhesive remnant index (ARI) of an adhesive cured with two different orthodontic light sources i.e. LED and halogen. Methods: Forty four (22 in each group) extracted human premolars without any defects were etched with 37% phosphoric acid and cleansed with water spray and air dried. The sealant (Ortho Solo) was applied on the tooth surface and the brackets were bonded using adhesive (Enlight). Adhesives were cured with Halogen (Litex) and LED (D-LUX) for 40 seconds. Then the specimens were debonded later using a universal testing machine, with crosshead speed of 0.2 mm/min until the brackets were detached. Adhesive remnant index (ARI) scores were assessed under stereomicroscope at ×10 magnification. Results: The shear bond strength in Halogen group was 19.73 ± 3.44 MPa and in the LED group 20.81±3.02 MPa which is little higher than halogen group. The proportion of being adhesive remaining index for ARI Score 1 in Halogen group was 5 (22.7%) and in LED group 7 (31.8%). While ARI Score 2 in the Halogen group was 13 (59.1%) compared to LED group 8 (36.4%). However, ARI Score 3 in Halogen group was 4 (18.2%) and in LED group 7 (31.8%). The overall model showing no significant difference. Conclusion: Within limitations, this in vitro study showed the shear bond strength of orthodontic adhesives cured with a LED was statistically equivalent to those cured with a halogen light curing unit. There were significant differences in the ARI scores of the light-curing units tested. LED light-curing units can be suggested for the polymerization of orthodontic bonding adhesives because it showed a balanced effect on ARI index. Bangladesh Med Res Counc Bull 2019; 45: 17-22

Shear bond strength of metal/ceramic Interface after different surface treatments: an in vitro study. Resistência ao cisalhamento da interface metal/cerâmica após diferentes tratamentos de superfície: estudo in vitro

2013 ◽  
Author(s):  
Sílvia Fontes Do Amaral Pereira
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
In Vitro Study ◽  
Surface Treatments ◽  
Vitro Study ◽  
Metal Ceramic

O objetivo do presente estudo in vitro foi verificar, através de teste de cisalhamento, a resistência de união da liga Wironia®light, à base de níquel-cromo sem berílio, sujeita a diferentes tratamentos de superfície, às cerâmicas Vita VM13 e Noritake. Foram confeccionados oitenta espécimes cilíndricos metálicos, com o auxílio de uma matriz de aço, nas dimensões de 4 mm de diâmetro por 4 mm de altura. Os espécimes foram divididos em oito grupos (n=10), de acordo com o tipo de tratamento superficial aplicado à liga metálica e com o tipo de cerâmica testada. Estes foram avaliados de acordo com os critérios de resistência ao cisalhamento e, com o auxílio de microscopia óptica, foi avaliada a área de cerâmica remanescente aderida ao metal após a fratura. Os corpos-de-prova do G6 (fabricados em Cerâmica Noritake com jateamento-26,401 ± 11,637 MPa) apresentaram maior resistência ao cisalhamento (p> 0,05) enquanto que os menores valores foram registrados no G4 (Cerâmica Vita com utilização de broca-13,440 ± 7,766 MPa). G6 (19425,4 μm2) apresentou a maior área de cerâmica aderida ao metal (p> 0,05) enquanto que o G4 (2310,2 μm2) apresentou a menor área. Concluiu-se que G6 obteve os valores mais altos de resistência ao cisalhamento e de remanescente cerâmico aderido à superfície metálica enquanto que o G4 obteve os valores mais baixos. Descritores: Restaurações metalo-cerâmicas; ligas de níquel-cromo;porcelana dentária.

scholarly journals Assessment of shear bond strength of brackets bonded by direct and indirect techniques: an in vitro study

2012 ◽  
Vol 17 (4) ◽  
pp. 1-7 ◽  
Author(s):  
Roberto Hideo Shimizu ◽  
Karlos Giovani Grando ◽  
Isabela Almeida Shimizu ◽  
Augusto Ricardo Andriguetto ◽  
Ana Cláudia Moreira Melo ◽  
...  
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
In Vitro Study ◽  
Adhesive System ◽  
Vitro Study ◽  
Group Iii ◽  
Indirect Bonding ◽  
Group I ◽  
Group Ii

OBJECTIVE: This in vitro study was designed to evaluate the shear bond strength (SBS) of orthodontic metal brackets bonded by direct and indirect techniques. METHODS: Thirty healthy human maxillary premolar teeth were used. The teeth were divided into three groups of 10 teeth each: Group I - indirect bonding with SondhiTM Rapid-Set system (3M/Unitek), Group II - indirect bonding with TransbondTM XT adhesive system (3M/Unitek) and Group III - direct bonding with TransbondTM XT adhesive system (3M/Unitek). After bonding and obtaining the specimens for the study, the specimens were subjected to SBS testing in a universal testing machine (Emic, model DL-500). The Kolmogorov-Smirnov test was applied to ascertain that the data had a normal distribution and the Bartlett test to check whether there was homogeneity of variance. One-factor analysis of variance was performed and, subsequently, Tukey's test for paired means. A 5% significance level was adopted. RESULTS: The results of Group I were 67.6 (N) and 5.9 (MPa); Group II, 68.9 (N) and 6.1 (MPa) and Group III (control), 92.5 (N) and 8.1 (MPa). CONCLUSION: It can therefore be concluded that the means for Group III were significantly higher compared with Groups I and II in both Newton (N) and Megapascal (MPa) values. The means attained by the indirect bonding technique used in Groups I and II, however, exhibited no statistically significant differences.

Sign in / Sign up

Export Citation Format

Share Document