scholarly journals Carbon Footprint and Life Cycle Assessment of PET Bottle Manufacturing Process

2018 ◽  
Author(s):  
Salman Alfarisi ◽  
Rangga Primadasa
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Carbon Footprint ◽  
Manufacturing Process

scholarly journals Life-Cycle Assessment of Carbon Footprint of Bike-Share and Bus Systems in Campus Transit

2020 ◽  
Vol 13 (1) ◽  
pp. 158
Author(s):  
Sishen Wang ◽  
Hao Wang ◽  
Pengyu Xie ◽  
Xiaodan Chen
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Energy Consumption ◽  
Carbon Footprint ◽  
Co2 Emission ◽  
Raw Material ◽  
Transit System ◽  
Two Systems ◽  
Bus System ◽  
Bike Share

Low-carbon transport system is desired for sustainable cities. The study aims to compare carbon footprint of two transportation modes in campus transit, bus and bike-share systems, using life-cycle assessment (LCA). A case study was conducted for the four-campus (College Ave, Cook/Douglass, Busch, Livingston) transit system at Rutgers University (New Brunswick, NJ). The life-cycle of two systems were disaggregated into four stages, namely, raw material acquisition and manufacture, transportation, operation and maintenance, and end-of-life. Three uncertain factors—fossil fuel type, number of bikes provided, and bus ridership—were set as variables for sensitivity analysis. Normalization method was used in two impact categories to analyze and compare environmental impacts. The results show that the majority of CO2 emission and energy consumption comes from the raw material stage (extraction and upstream production) of the bike-share system and the operation stage of the campus bus system. The CO2 emission and energy consumption of the current campus bus system are 46 and 13 times of that of the proposed bike-share system, respectively. Three uncertain factors can influence the results: (1) biodiesel can significantly reduce CO2 emission and energy consumption of the current campus bus system; (2) the increased number of bikes increases CO2 emission of the bike-share system; (3) the increase of bus ridership may result in similar impact between two systems. Finally, an alternative hybrid transit system is proposed that uses campus buses to connect four campuses and creates a bike-share system to satisfy travel demands within each campus. The hybrid system reaches the most environmentally friendly state when 70% passenger-miles provided by campus bus and 30% by bike-share system. Further research is needed to consider the uncertainty of biking behavior and travel choice in LCA. Applicable recommendations include increasing ridership of campus buses and building a bike-share in campus to support the current campus bus system. Other strategies such as increasing parking fees and improving biking environment can also be implemented to reduce automobile usage and encourage biking behavior.

scholarly journals Carbon Footprint and Related Production Costs of System Components of a Field-Grown Cercis canadensis L. ‘Forest Pansy’ Using Life Cycle Assessment

2013 ◽  
Vol 31 (3) ◽  
pp. 169-176 ◽  
Author(s):  
Dewayne L. Ingram ◽  
Charles R. Hall
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Carbon Footprint ◽  
Production System ◽  
Carbon Dioxide Emission ◽  
Ghg Emissions ◽  
International Standards ◽  
Production Costs ◽  
System Component ◽  
Cercis Canadensis

Life cycle assessment (LCA) was utilized to analyze the global warming potential (GWP), or carbon footprint, and associated costs of the production components of a field-grown, spade-dug, 5 cm (2 in) caliper Cercis canadensis ‘Forest Pansy’ in the Lower Midwest, U.S. A model production system was determined from interviews of nursery managers in the region. Input materials, equipment use and labor were inventoried for each production system component using international standards of LCA. The seed-to-landscape GWP, expressed in kilograms of carbon dioxide emission equivalent (CO2e), was determined to be 13.707. Equipment use constituted the majority (63%) of net CO2-e emissions during production, transport to the customer, and transplanting in the landscape. The model was queried to determine the possible impact of production system modifications on carbon footprint and costs to aid managers in examining their production system. Carbon sequestration of a redbud growing in the landscape over its 40 year life, weighted proportionally for a 100 year assessment period, was calculated to be −165 kg CO2e. The take-down and disposal activities following its useful life would result in the emission of 88.44 kg CO2e. The life-cycle GWP of the described redbud tree, including GHG emissions during production, transport, transplanting, take down and disposal would be −63 kg CO2e. Total variable costs associated with the labor, materials, and equipment use incurred in the model system were $0.069, $2.88, and $34.81 for the seedling, liner, and field production stages, respectively. An additional $18.83 was needed for transport to the landscape and planting in the landscape and after the 40 year productive life of the tree in the landscape, another $60.86 was needed for take-down and disposal activities.

Life cycle assessment of organic Parmesan Cheese considering the whole dairy supply chain

2019 ◽  
Author(s):  
Giulia Borghesi ◽  
Giuseppe Vignali
Keyword(s):  
Life Cycle Assessment ◽  
Supply Chain ◽  
Life Cycle ◽  
Environmental Impact ◽  
Carbon Footprint ◽  
Water Consumption ◽  
Organic Agriculture ◽  
Water Footprint ◽  
Dairy Farm ◽  
Parmesan Cheese

Agriculture and food manufacturing have a considerable effect on the environment emissions: holdings and farms play an important role about greenhouse gas emissions and water consumption. This study aims at evaluating the environmental impact of one of the most important Italian DOP product: organic Parmesan Cheese. Environmental performances of the whole dairy supply chain have been assessed according to the life cycle assessment approach (LCA). In this analysis Parmesan Cheese is made from an organic dairy farm in Emilia Romagna, which uses the milk from three different organic livestock productions. Organic agriculture is different from conventional; the major difference is represented by the avoidance of the use of synthetic fertilizers and pesticides made in chemical industry process. Organic agriculture uses organic fertilizers to encourage the natural fertility of the soil respecting the environment and the agro-system. In this case, life cycle approach is used to assess the carbon footprint and the water footprint of organic Parmesan Cheese considering the milk and cheese production. The object at this level is investigating the environmental impact considering the situation before some improvement changes. The functional unit is represented by 1 kg of organic Parmesan Cheese; inventory data refer to the situation in year 2017 and system boundaries consider the inputs related to the cattle and dairy farm until the ripening (included). The carbon footprint is investigated using IPCC 2013 Global Warming Potential (GWP) 100a method, developed by Intergovernmental Panel on Climate Change, and reported in kg of CO2eq. Otherwise, water footprint allows to measure the water consumption and in this work it is assessed using AWARE method (Available Water REmaining).

scholarly journals Life-Cycle Assessment and Monetary Measurements for the Carbon Footprint Reduction of Public Buildings

2020 ◽  
Vol 12 (8) ◽  
pp. 3460 ◽  
Author(s):  
Maria Rosa Trovato ◽  
Francesco Nocera ◽  
Salvatore Giuffrida
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Carbon Footprint ◽  
Co2 Emission ◽  
Temperate Climate ◽  
Residual Value ◽  
Public Buildings ◽  
Energy Retrofit ◽  
Low Co2 ◽  
Study Results

Energy consumption in public buildings increased drastically over the last decade. Significant policy actions towards the promotion of energy efficiency in the building sector have been developed involving sustainable low-CO2-emission technologies. This paper presents the results of an economic–environmental valuation of a standard energy retrofit project for a public building in a Mediterranean area, integrating a life-cycle assessment (LCA) into the traditional economic–financial evaluation pattern. The study results show that simple retrofit of sustainable low-CO2-emission strategies such as wooden double-glazed windows, organic external wall insulation systems, and green roofs can reduce energy needs for heating and cooling by 58.5% and 33.4%, respectively. Furthermore, the implementation of an LCA highlights that the use of sustainable materials reduces the building’s carbon footprint index by 54.1% after retrofit compared to standard materials, thus providing an additional increase in the socio-environmental–economic–financial results of 18%. Some proposals are made about the accounting of the replacement costs and the residual value as requested in the logic of life-cycle cost (that is the economic extension of the LCA), namely concerning the method to take into account the replacement costs and the residual value. The economic calculation highlights the fundamental role played by tax benefits supporting the building energy retrofit, also in temperate climate zones, thus allowing the creation of environmental benefits in addition to remarkable cost savings.

scholarly journals Ecodesign — Carbon Footprint — Life Cycle Assessment — Life Cycle Sustainability Analysis. A Flexible Framework for a Continuum of Tools

2010 ◽  
Vol 4 (-1) ◽  
pp. 42-46 ◽  
Author(s):  
Reinout Heijungs
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Carbon Footprint ◽  
Full Spectrum ◽  
Work Related ◽  
Sustainability Analysis ◽  
Special Cases ◽  
Flexible Framework ◽  
Answering Questions

Ecodesign — Carbon Footprint — Life Cycle Assessment — Life Cycle Sustainability Analysis. A Flexible Framework for a Continuum of Tools Life cycle assessment (LCA) is a tool for answering questions related to environmental impacts of products. It is a comprehensive tool, addressing the entire life cycle, and addressing the full spectrum of environmental impacts. There are two opposite movements occurring: LCA is getting smaller, and it is getting broader. This presentation presents the general framework for a broader life cycle sustainability analysis (LCSA), and shows how the practical work related to doing an LCA, a carbon footprint, or an analysis for ecodesign, can be seen as special cases.

Assessing Water Consumption of S-PVC Resin Manufacturing Process by Life Cycle Assessment

2014 ◽  
Vol 931-932 ◽  
pp. 619-623
Author(s):  
Sun Olapiriyakul
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Water Resources ◽  
Water Use ◽  
Manufacturing Process ◽  
Eastern Region ◽  
Industrial Manufacturing ◽  
Sustainable Water Resources Management ◽  
Local Water

The rapid growth of industry has resulted in increased severity of water scarcity in the Eastern region of Thailand over the past decade. The assessment of water use by industrial manufacturing processes located in areas experiencing water stress is necessary to ensure a sustainable water resources management. The objective of this study is to demonstrate the use of life cycle assessment as a tool for assessing water use in an industrial manufacturing process. A case study of S-PVC resin manufacturing process located in Map Ta Phut Industrial Estate, Rayong province, Thailand, is presented. The studying results indicate that the amount of water used to produce 1 Kg of S-PVC resin is 14.72 liters, of which 6.22 liters are withdrawn from local water resources. Additionally, the direct and indirect water use along the production supply chain is accounted for in a streamlined life cycle assessment.

Sign in / Sign up

Export Citation Format

Share Document