GROWTH RETARDANTS FOR CONTROL OF LODGING IN FLAX

1976 ◽  
Vol 56 (4) ◽  
pp. 799-803 ◽  
Author(s):  
G. H. GUBBELS
Keyword(s):  
Succinic Acid ◽  
Plant Height ◽  
Seed Yield ◽  
Linum Usitatissimum ◽  
Trimethylammonium Chloride ◽  
Growth Retardants ◽  
Linum Usitatissimum L ◽  
Reduced Height ◽  
Early Late ◽  
Number Of Seeds

Redwood 65 and Linott flax (Linum usitatissimum L.) were grown in the field with and without added nitrogen to evaluate the use of growth retardants in reducing lodging. BAS 0660W (N-dimethylmorpholiniumchloride) at 0.21 and 0.63 kg/ha, chlormequat [(2- chloroethyl) trimethylammonium chloride] at 4.2 and 8.4 kg/ha, and ancymidol (α-cyclopropyl-α-(4-methoxyphenyl)-5-pyrimidinemethanol) at 1.05 and 3.15 kg/ha reduced plant height but failed to reduce lodging or increase seed yield when applied at 1,044 liters/ha. Two years of tests with SADH (succinic acid-2, 2-dimethylhydrazide) at 4.2 and 8.4 kg/ha also resulted in no benefits. A third year of testing with SADH, applied early, late and early + late, resulted in reduced duration of flowering, delayed maturity, reduced height and marginally increased lodging, but no effect on seed yield. Number of capsules per plant was increased, but this was offset by a decrease in number of seeds per capsule.

Genetic variability, mean performance and analysis of variance in Linseed (Linum usitatissimum L.)

2019 ◽  
Vol 4 (01) ◽  
pp. 89-95
Author(s):  
Ravindra Kumar Kasana ◽  
P. K. Singh ◽  
Amit Tomar ◽  
Mahak Singh
Keyword(s):  
Genetic Variability ◽  
Plant Height ◽  
Analysis Of Variance ◽  
Seed Yield ◽  
Linum Usitatissimum ◽  
Harvest Index ◽  
Linum Usitatissimum L ◽  
Days To Maturity ◽  
Biological Yield ◽  
Number Of Seeds

The most promising lines showing highest seed yield with high mean performance for other yield contributing characters were identified as EC-22672, NDLS-164, NDLS-169 and NDLS-205-03-02. The genotypes exhibiting highest mean performance for different characters such as EC-22672 for seed yield per plant, SLS-50, NDL-204, Meera and NDLS-204 for early days to 50% flowering, NDLS-181 for early days to maturity, EC- 41494 for plant height, NDLS-77 for primary branches per plant, NDLS-169 for secondary branches per plant, EC-41404 for number of capsules per plant, EC-41494 for number of seeds per capsule, Shekhar for biological yield, EC-23269 for harvest index and SLS-48 for test weight.

EFFECT OF SEEDING RATE ON PLANT AND SEED CHARACTERISTICS OF NEW FLAX CULTIVARS

1989 ◽  
Vol 69 (3) ◽  
pp. 791-795 ◽  
Author(s):  
G. H. GUBBELS ◽  
E. O. KENASCHUK
Keyword(s):  
Iodine Number ◽  
Plant Height ◽  
Seed Yield ◽  
Linum Usitatissimum ◽  
Seed Weight ◽  
Oil Content ◽  
Seeding Rate ◽  
Linum Usitatissimum L ◽  
Volume Weight ◽  
Seed Characteristics

Five flax (Linum usitatissimum L.) cultivars, Dufferin, McGregor, Linott, NorLin and NorMan were grown in the field in 1985, 1986 and 1987 at seeding rates of 200, 400, 600 and 800 seeds m−2. Averaged over all cultivars and years, as seeding rate increased from 200 to 800 seeds m−2, maturity was hastened 2.1 d, seed weight decreased 0.16 g 1000−1 seeds, oil content decreased 0.6%, iodine number decreased 1.3 units and volume weight was not markedly changed. Lodging increased and basal branching decreased from 1.68 to 0.18 branches per plant as seeding rate increased. Plant height increased 0.6 cm from the 200 to the 400 seeds m−2 rate then decreased 1.8 cm from the 400 to the 800 seeds m−2 rate. Seed yield increased from 110 to 124 g m−2 as seeding rate increased from 200 to 600 seeds m−2, then decreased to 121 g m−2 at 800 seeds m−2. Although yields of the five cultivars varied somewhat in their response to seeding rate and year, most yielded near optimum at the 600 seeds m−2 seeding rate.Key words: Flax, Linum usitatissimum L., seeding rate, lodging

Analysis of yield factors in segregating populations and their implications in selection of flax (Linum usitatissimum)

1983 ◽  
Vol 25 (5) ◽  
pp. 495-501 ◽  
Author(s):  
S. K. Rao ◽  
S. P. Singh
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Linum Usitatissimum ◽  
Seed Weight ◽  
Correlation Coefficients ◽  
Positive Association ◽  
Direct Selection ◽  
Linum Usitatissimum L ◽  
Selection Indices ◽  
Efficient Prediction

Correlation coefficients were calculated in all possible combinations between days to maturity, plant height, number of capsules, primary branches, secondary branches, average number of seeds per capsule, 1000-seed weight, and seed yield per plant in 48 F3 populations of flax (Linum usitatissimum L.). None of these attributes had negative association with seed yield. The majority of the yield components had a strong positive association with seed yield and the correlation coefficient of plant height with seed yield was negligible. Multiple regression analysis revealed that the regression equation involving number of secondary branches and number of capsules per plant had efficient prediction power. Path analysis studies also revealed that number of capsules followed by secondary branches and 1000-seed weight were the major components influencing seed yield. Selection indices based on primary branches, secondary branches, number of capsules, 1000-seed weight, and seed yield per plant were 203.83% superior to direct selection for seed yield.

STUDY OF EFFECT OF EMS, MMS AND GR ON YIELD CONTRIBUTING TRAITS IN URDBEAN, VIGNA MUNGO

2017 ◽  
Vol 23 (1) ◽  
Author(s):  
A. B. SAGADE
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Seed Weight ◽  
Inhibitory Effect ◽  
Individual Plant ◽  
Mean Values ◽  
Methane Sulphonate ◽  
Pod Length ◽  
100 Seed Weight ◽  
Number Of Seeds

The study of the effect of three well known mutagens, ethyl methane sulphonate (EMS), methyl methane sulphonate (MMS) and gamma rays (GR) on the yield contributing traits of the urdbean variety TPU-4 were carried out in the M3 generation. Effect of selected mutagenic treatments/doses of EMS (0.02, 0.03 and 0.04 M), MMS (0.0025, 0.05 and 0.01 M) and (GR) (30, 40 and 50 KR) on different yield contributing traits like plant height, plant spread, number of pods per plant, pod length, number of seeds per pod, seed yield per plant and 100 seed weight were analyzed in the M3 populations of the variety TPU-4. Seeds of M2 plants and control were harvested separately and sown to raise M3 population.. Genetic variabilty in the mutagen administered M3 progeny of the urdbean variety TPU-4 was analyzed by employing statistical methods. Data on mean values and shift in the mean of seven quantitative traits was evaluated on individual plant basis. The experimental findings revealed that concentrations / dose of the all these mutagens showed inhibitory effect on plant height, number of pods per plant, pod length and number of seeds per pod. Lower concentrations of mutagens exerted a promotory effect on plant spread, 100 seed weight and seed yield per plant while higher concentrations of these mutagens inhibited them to different extent.

Combining ability and heterosis studies across environments in linseed (Linum usitatissimum L.)

2011 ◽  
Vol 59 (1) ◽  
pp. 87-102 ◽  
Author(s):  
S. Sood ◽  
N. Kalia ◽  
S. Bhateria
Keyword(s):  
Seed Yield ◽  
Linum Usitatissimum ◽  
Combining Ability ◽  
Yield Components ◽  
Block Design ◽  
Linum Usitatissimum L ◽  
Randomized Block Design ◽  
Component Traits ◽  
Parental Lines ◽  
Fibre Yield

Combining ability and heterosis were calculated for fourteen lines of linseed in a line × tester mating design using twelve lines and two diverse testers in two different environments. The hybrids and parental lines were raised in a completely randomized block design with three replications to investigate seed and fibre yield and their component traits. Genetic variation was significant for most of the traits over environments. Combining ability studies revealed that the lines KL-221 and LCK-9826 were good general combiners for seed yield and most of its components, whereas LMH-62 and LC-2323 were good general combiners for yield components only. Moreover, KL-221 was also a good general combiner for fibre yield. Similarly, B-509 and Ariane were good general combiners for fibre yield and most of its components. Among the specific cross combinations, B-509 × Flak-1 was outstanding for seed yield per plant and B-509 × KL-187 and LC-2323 × LCK-9826 for fibre yield per plant, with high SCA effects. In general, the hybrids excelled their respective parents and the standard checks for most of the characters studied. Based on the comparison of mean performance, SCA effects and the extent of heterosis, the hybrids LC-2323 × LCK-9826 and B-509 × KL-221 appeared to be the most promising for both seed and fibre yield. Other promising combinations were LC-2323 × KL-210 and B-509 × Ariane for seed and fibre yield, respectively. The superiority of LC-2323, LCK-9826, KL-221, B-509 and Ariane as good general combiners was further confirmed by the involvement of these parents in the desirable cross combinations.

scholarly journals Effect of sulphur on the seed yield and oil content of sesame (Sesamum indicum L.)

2019 ◽  
Vol 17 (1) ◽  
pp. 33-38
Author(s):  
Swapan Kumar Paul ◽  
Mosa Morsheda Khatun ◽  
Md Abdur Rahman Sarkar
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Dry Matter ◽  
Oil Content ◽  
Dry Matter Production ◽  
Production Plant ◽  
Matter Production ◽  
Stover Yield ◽  
Number Of Seeds ◽  
Number Of Branches

Sulphur is a component of plant amino acids, proteins, vitamins, and enzyme structures which influence the productivity of oil seed and total oil content. The experiment was conducted to find out the effect of sulphur on the seed yield and oil content of sesame in Bangladesh. The experiment comprised three varieties of sesame viz. Binatil-2, Binatil-3 and BARI Til-4 and six levels of sulphur (S) viz. 0, 10, 20, 30, 40 and 50 kg S ha–1. The experiment was laid out in a randomized complete block design with three replications. Dry matter production, crop characters, yield components, seed yield and oil content were significantly influenced by variety, level of sulphur and their interaction. The highest dry matter production plant–1 at 50 DAS (17.56 g), plant height (101.3 cm), number of branches plant–1 (3.66),  number of pods plant-1 (41.56), number of seeds pod-1 (58.83),  seed yield    (747.2 kg ha-1), stover yield (2243.0 kg ha–1) and oil content (40.03%) were obtained in BARI Til-4 while the corresponding lowest values of all parameters were recorded in Binatil-2. In case of sulphur application, the highest dry matter production plant–1 at 50 DAS (20.81 g), plant height (109.7 cm), number of branches plant–1 (3.87),  number of pods plant–1 (46.13),  number of seeds pod-1 (56.67),  seed yield (800.0 kg ha–1), stover yield (2787 kg ha–1 ) and oil content (43.97%) were obtained when crop was fertilized with 30 kg S ha–1 while the lowest seed yield (502.2 kg ha–1), stover yield (1550.0 kg ha–1) and oil content (32.80%) were obtained in control (0 kg S ha–1). BARI Til-4 fertilized with 30 kg S ha–1 produced the highest dry matter plant–1 at 50 DAS (24.80 g), number of pods plant–1 (51.13), seeds pod–1 (62.0) and seed yield (1011.0 kg ha–1). The highest oil content (43.97%) was also recorded in BARI Til-4 fertilized with 30 kg S ha–1, which was as good as that of BARI Til-4 fertilized with 40 kg S ha–1. Therefore, BARI Til-4 fertilized with 30 kg S ha–1 can be considered as a promising practice in respect of seed yield and oil content of sesame in Bangladesh. J. Bangladesh Agril. Univ. 17(1): 33–38, March 2019

scholarly journals Inoculation and Soil Texture Effects on Yield and Yield Components of Mungbean

2018 ◽  
Vol 10 (9) ◽  
pp. 6 ◽  
Author(s):  
Andre A. Diatta ◽  
Wade E. Thomason ◽  
Ozzie Abaye ◽  
Larry J. Vaughan ◽  
Thomas L. Thompson ◽  
...  
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Soil Texture ◽  
Loamy Sand ◽  
Plant Residue ◽  
Silt Loam ◽  
Sand Soil ◽  
Loamy Sand Soil ◽  
Group I ◽  
Number Of Seeds

Mungbean [Vigna radiata (L.) Wilczek] is a short-duration and relatively drought-tolerant crop grown predominantly in the tropics. This grain legume can improve soil fertility through biological nitrogen (N) fixation. To assess the effects of Bradyrhizobium (group I) inoculation on yield and yield attributes of mungbean, a greenhouse study was conducted during Fall 2016 with two mungbean cultivars (‘Berken’ and ‘OK2000’), two inoculum treatments (inoculated and uninoculated), and two soil textures (loamy sand and silt loam). Pots were laid out in a completely randomized design and treatment combinations were replicated seven times. The main effects of cultivar and soil texture significantly (P ≤ 0.05) affected mungbean seed weight and plant residue mass. Seed yield (13%), plant residue (22%), and protein content (6%) of OK2000 were significantly higher than Berken cultivar. A 31% seed yield and 40% plant residue increase were recorded on silt loam soil compared to loamy sand soil. Significant increase in plant height (18%) and number of pods per plant (21%) were also recorded when mungbean plants were grown on silt loam compared to loamy sand soil. Bradyrhizobium inoculation significantly increased the number of pods per plant, the number of seeds per plant, and seed yield. [Cultivar × inoculation] and [cultivar × soil texture] interactions had significant (P ≤ 0.05) effects on number of seeds per pods and plant height, respectively. Understanding the agronomic practices and soil physical properties that may limit mungbean production could help in optimizing its establishment and growth in non-traditional growing areas.

Flax (Linum usitatissimum L.) responses to chilling and heat stress on flowering and seed yield

1997 ◽  
Vol 77 (1) ◽  
pp. 97-99 ◽  
Author(s):  
L. V. Gusta ◽  
B. J. O'Connor ◽  
R. S. Bhatty
Keyword(s):  
Heat Stress ◽  
Seed Yield ◽  
Linum Usitatissimum ◽  
Oil Quality ◽  
Oil Composition ◽  
Flowering Stage ◽  
Linum Usitatissimum L ◽  
Flower Yield ◽  
Delayed Flowering ◽  
Chilling Treatment

The effect of a 5 °C chilling treatment at the seedling stage on days to flower, yield and oil quality and quantity was determined for seven cultivars of flax (Linum usitatissimum L.). Three days of chilling delayed flowering in Dufferin, McGregor and NorLin, whereas 5 d of chilling delayed flowering in all cultivars except Andro and Noralta. Seven days of chilling reduced the seed yield of only McGregor, Norlin, NorMan and Vimy. The effect of a 40 °C heat stress at the flowering stage on yield and oil composition was determined for the same seven cultivars. A heat stress of 40 °C for 3 d reduced the seed yield of NorMan, whereas, a 5 d stress reduced the seed yield of all cultivars except McGregor and Noralta. The composition of the oil was not affected by the heat stress. These results suggest genetic variability exists among flax cultivars for tolerance to chilling and heat stresses. Controlled tests can be used to select superior stress tolerant genotypes. Key words: Flax, chilling, heat, flowering, yield

DIPLOID, ANEUPLOID AND TRIPLOID PLANTS FROM HAPLOID × DIPLOID CROSSES IN FLAX (LINUM USITATISSIMUM)

1980 ◽  
Vol 22 (4) ◽  
pp. 591-596 ◽  
Author(s):  
Beatrice E. Murray
Keyword(s):  
Seed Yield ◽  
Doubled Haploid ◽  
Linum Usitatissimum ◽  
Low Fertility ◽  
Doubled Haploid Lines ◽  
Linum Usitatissimum L ◽  
Twinning Frequency

Flax (Linum usitatissimum L.) haploids (2n = x = 15), selected from haploid-diploid twin seedlings in the cultivar Rocket 4 and crossed with diploid sibs, differed in boll-set; in frequency of diploid, aneuploid and triploid plants in each F1 family (58, 20 and 22%, respectively); and in frequency of twins in F2 families. The diploid plants of the F1 progeny were fertile and high in seed yield which contrasted with the sterility of the triploids and low fertility, or sterility, of the aneuploids. Twinning frequency and boll-set was stabilized at specific levels in some doubled haploid lines. The advantages of haploid × diploid crosses for genetic experimentation are discussed.

Sign in / Sign up

Export Citation Format

Share Document