Semi-Active Control Algorithms for Magneto-Rheological Dampers

2015 ◽  
Author(s):  
M.T. Braz-Cesar ◽  
R. Rio ◽  
R.C. Barros
Keyword(s):  
Active Control ◽  
Control Algorithms ◽  
Magneto Rheological

The Use of Damping Based Semi-Active Control Algorithms in the Mechanical Smart-Spring System

2017 ◽  
Vol 140 (2) ◽  
Author(s):  
Wander Gustavo Rocha Vieira ◽  
Fred Nitzsche ◽  
Carlos De Marqui
Keyword(s):  
Active Control ◽  
Control Algorithm ◽  
Control Strategies ◽  
Vibration Reduction ◽  
Flow Analysis ◽  
Coupled Systems ◽  
Control Technique ◽  
Control Algorithms ◽  
Control Techniques ◽  
Spring Mechanism

In recent decades, semi-active control strategies have been investigated for vibration reduction. In general, these techniques provide enhanced control performance when compared to traditional passive techniques and lower energy consumption if compared to active control techniques. In semi-active concepts, vibration attenuation is achieved by modulating inertial, stiffness, or damping properties of a dynamic system. The smart spring is a mechanical device originally employed for the effective modulation of its stiffness through the use of semi-active control strategies. This device has been successfully tested to damp aeroelastic oscillations of fixed and rotary wings. In this paper, the modeling of the smart spring mechanism is presented and two semi-active control algorithms are employed to promote vibration reduction through enhanced damping effects. The first control technique is the smart-spring resetting (SSR), which resembles resetting control techniques developed for vibration reduction of civil structures as well as the piezoelectric synchronized switch damping on short (SSDS) technique. The second control algorithm is referred to as the smart-spring inversion (SSI), which presents some similarities with the synchronized switch damping (SSD) on inductor technique previously presented in the literature of electromechanically coupled systems. The effects of the SSR and SSI control algorithms on the free and forced responses of the smart-spring are investigated in time and frequency domains. An energy flow analysis is also presented in order to explain the enhanced damping behavior when the SSI control algorithm is employed.

Frequency Shaped Semi-Active Control for Magnetorheological Fluid-Based Vibration Control Systems

2013 ◽  
Author(s):  
Young-Tai Choi ◽  
Norman M. Wereley ◽  
Gregory J. Hiemenz
Keyword(s):  
Vibration Control ◽  
Control Systems ◽  
Active Control ◽  
Control Algorithm ◽  
Active Vibration Control ◽  
Control Algorithms ◽  
Model Parameters ◽  
Mr Fluid ◽  
Control Current ◽  
Active Vibration

Novel semi-active vibration controllers are developed in this study for magnetorheological (MR) fluid-based vibration control systems, including: (1) a band-pass frequency shaped semi-active control algorithm, (2) a narrow-band frequency shaped semi-active control algorithm. These semi-active vibration control algorithms designed without resorting to the implementation of an active vibration control algorithms upon which is superposed the energy dissipation constraint. These new Frequency Shaped Semi-active Control (FSSC) algorithms require neither an accurate damper (or actuator) model, nor system identification of damper model parameters for determining control current input. In the design procedure for the FSSC algorithms, the semi-active MR damper is not treated as an active force producing actuator, but rather is treated in the design process as a semi-active dissipative device. The control signal from the FSSC algorithms is a control current, and not a control force as is typically done for active controllers. In this study, two FSSC algorithms are formulated and performance of each is assessed via simulation. Performance of the FSSC vibration controllers is evaluated using a single-degree-of-freedom (DOF) MR fluid-based engine mount system. To better understand the control characteristics and advantages of the two FSSC algorithms, the vibration mitigation performance of a semi-active skyhook control algorithm, which is the classical semi-active controller used in base excitation problems, is compared to the two FSSC algorithms.

Comparative research on semi-active control strategies for magneto-rheological suspension

2009 ◽  
Vol 59 (3) ◽  
pp. 433-453 ◽  
Author(s):  
Xiao-min Dong ◽  
Miao Yu ◽  
Chang-rong Liao ◽  
Wei-min Chen
Keyword(s):  
Active Control ◽  
Comparative Research ◽  
Control Strategies ◽  
Magneto Rheological

Active Control Algorithms for the Control of Rotor Vibrations Using HSFDs

2000 ◽  
Author(s):  
A. El-Shafei
Keyword(s):  
Active Control ◽  
Gain Scheduling ◽  
Rotating Machinery ◽  
Squeeze Film ◽  
Control Algorithms ◽  
Critical Stage ◽  
Squeeze Film Damper ◽  
Active Vibration

The Hybrid Squeeze Film Damper (HSFD) has proven itself to be an effective controlling device of vibration in rotating machinery. The critical stage in the development of the HSFD as an active vibration suppressant, is the development of the control algorithms for active control of rotor vibrations. This paper summarizes, evaluates and compares the control algorithms for HSFD supported rotors. Quantitative as well as qualitative measures of the effectiveness of the control algorithms are presented. The study includes the PID-type controllers, LQR, gain scheduling, adaptive and bang-bang controllers. The adaptive, gain scheduling and nonlinear proportional controllers, have proved to be quite effective in the active control of HSFD supported rotors, with impressive results.

Application of some semi-active control algorithms to a smart base-isolated building employing MR dampers

2006 ◽  
Vol 13 (2-3) ◽  
pp. 693-704 ◽  
Author(s):  
Hyung-Jo Jung ◽  
Kang-Min Choi ◽  
Billie F. Spencer ◽  
In-Won Lee
Keyword(s):  
Active Control ◽  
Control Algorithms ◽  
Mr Dampers
Sign in / Sign up

Export Citation Format

Share Document