Advanced High-Strength Steels and Hydroforming Reduce Mass and Improve Dent Resistance of Light Weight Doors In UltraLight Steel Auto Closures Project

2001 ◽  
Author(s):  
Marcel Van Schaik
Keyword(s):  
High Strength Steels ◽  
High Strength ◽  
Light Weight ◽  
Advanced High Strength Steels

Structural Bonding for Lightweight Construction

2009 ◽  
Vol 618-619 ◽  
pp. 49-56 ◽  
Author(s):  
Martin Hornung ◽  
Michael Hajj
Keyword(s):  
High Strength Steels ◽  
High Strength ◽  
Light Weight ◽  
Maximum Weight ◽  
Lightweight Construction ◽  
Structural Adhesives ◽  
Advanced High Strength Steels ◽  
Structural Bonding ◽  
Processing Cost ◽  
High Processing

The demand for safer, lighter and more fuel efficient vehicles has led to the market entry of light weight construction, with the use of advanced high strength steels, engineering plastic and light weight metals. Maximum weight savings potential will be limited if these are used in isolation. Chemistry based structural adhesives and foams enable the intelligent use of all three weight saving methodologies to overcome the problems of safety, quality and high processing cost.

Numerical modeling of stress-strain relationships for advanced high strength steels

2021 ◽  
Vol 182 ◽  
pp. 106687
Author(s):  
Yu Xia ◽  
Chu Ding ◽  
Zhanjie Li ◽  
Benjamin W. Schafer ◽  
Hannah B. Blum
Keyword(s):  
Numerical Modeling ◽  
High Strength Steels ◽  
High Strength ◽  
Stress Strain ◽  
Advanced High Strength Steels

scholarly journals Heat Treatment Design for a QP Steel: Effect of Partitioning Temperature

Metals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1136
Author(s):  
Marcel Carpio ◽  
Jessica Calvo ◽  
Omar García ◽  
Juan Pablo Pedraza ◽  
José María Cabrera
Keyword(s):  
Retained Austenite ◽  
High Strength Steels ◽  
High Strength ◽  
Tensile Tests ◽  
Quenching Temperature ◽  
Advanced High Strength Steels ◽  
New Family ◽  
Automotive Parts ◽  
Fresh Martensite ◽  
Industry Needs

Designing a new family of advanced high-strength steels (AHSSs) to develop automotive parts that cover early industry needs is the aim of many investigations. One of the candidates in the 3rd family of AHSS are the quenching and partitioning (QP) steels. These steels display an excellent relationship between strength and formability, making them able to fulfill the requirements of safety, while reducing automobile weight to enhance the performance during service. The main attribute of QP steels is the TRIP effect that retained austenite possesses, which allows a significant energy absorption during deformation. The present study is focused on evaluating some process parameters, especially the partitioning temperature, in the microstructures and mechanical properties attained during a QP process. An experimental steel (0.2C-3.5Mn-1.5Si (wt%)) was selected and heated according to the theoretical optimum quenching temperature. For this purpose, heat treatments in a quenching dilatometry and further microstructural and mechanical characterization were carried out by SEM, XRD, EBSD, and hardness and tensile tests, respectively. The samples showed a significant increment in the retained austenite at an increasing partitioning temperature, but with strong penalization on the final ductility due to the large amount of fresh martensite obtained as well.

Selection and use of coated advanced high-strength steels for automotive applications

2004 ◽  
Vol 101 (7-8) ◽  
pp. 551-558 ◽  
Author(s):  
R. Bode ◽  
M. Meurer ◽  
T. W. Schaumann ◽  
W. Warnecke
Keyword(s):  
High Strength Steels ◽  
High Strength ◽  
Automotive Applications ◽  
Advanced High Strength Steels

Influence of the contact with friction on the deformation behavior of advanced high strength steels in the Nakajima test

2021 ◽  
pp. 030932472110212
Author(s):  
Mohammad Mehdi Kasaei ◽  
Marta C Oliveira
Keyword(s):  
Finite Element ◽  
Friction Coefficient ◽  
Strain Rate ◽  
Contact Pressure ◽  
Deformation Behaviour ◽  
High Strength Steels ◽  
High Strength ◽  
Advanced High Strength Steels ◽  
Deformation Mechanics ◽  
Nakajima Test

This work presents a new understanding on the deformation mechanics involved in the Nakajima test, which is commonly used to determine the forming limit curve of sheet metals, and is focused on the interaction between the friction conditions and the deformation behaviour of a dual phase steel. The methodology is based on the finite element analysis of the Nakajima test, considering different values of the classic Coulomb friction coefficient, including a pressure-dependent model. The validity of the finite element model is examined through a comparison with experimental data. The results show that friction affects the location and strain path of the necking point by changing the strain rate distribution in the specimen. The strain localization alters the contact status from slip to stick at a portion of the contact area from the pole to the necking zone. This leads to the sharp increase of the strain rate at the necking point, as the punch rises further. The influence of the pressure-dependent friction coefficient on the deformation behaviour is very small, due to the uniform distribution of the contact pressure in the Nakajima test. Moreover, the low contact pressure range attained cannot properly replicate real contact condition in sheet metal forming processes of advanced high strength steels.

scholarly journals Materials for Automotive Lightweighting

2019 ◽  
Vol 49 (1) ◽  
pp. 327-359 ◽  
Author(s):  
Alan Taub ◽  
Emmanuel De Moor ◽  
Alan Luo ◽  
David K. Matlock ◽  
John G. Speer ◽  
...  
Keyword(s):  
Galvanic Corrosion ◽  
Low Carbon Steel ◽  
High Strength Steels ◽  
High Strength ◽  
Low Carbon ◽  
New Materials ◽  
Specific Strength ◽  
Advanced High Strength Steels ◽  
Strength And Stiffness ◽  
The Cost

Reducing the weight of automobiles is a major contributor to increased fuel economy. The baseline materials for vehicle construction, low-carbon steel and cast iron, are being replaced by materials with higher specific strength and stiffness: advanced high-strength steels, aluminum, magnesium, and polymer composites. The key challenge is to reduce the cost of manufacturing structures with these new materials. Maximizing the weight reduction requires optimized designs utilizing multimaterials in various forms. This use of mixed materials presents additional challenges in joining and preventing galvanic corrosion.

Sign in / Sign up

Export Citation Format

Share Document