Correlating an Air Motion Number to Combustion Metrics and Initial Flame Kernel Development

This paper offers new insights into a partial fuel stratification (PFS) combustion strategy that has proven to be effective at stabilizing overall lean combustion in direct injection spark ignition engines. To this aim, high spatial and temporal resolution optical diagnostics were applied in an optically accessible engine working in PFS mode for two fuels and two different durations of pilot injection at the time of spark: 210 µs and 330 µs for E30 (gasoline blended with ethanol by 30% volume fraction) and gasoline, respectively. In both conditions, early injections during the intake stroke were used to generate a well-mixed lean background. The results were compared to rich, stoichiometric and lean well-mixed combustion with different spark timings. In the PFS combustion process, it was possible to detect a non-spherical and highly wrinkled blue flame, coupled with yellow diffusive flames due to the combustion of rich zones near the spark plug. The initial flame spread for both PFS cases was faster compared to any of the well-mixed cases (lean, stoichiometric and rich), suggesting that the flame propagation for PFS is enhanced by both enrichment and enhanced local turbulence caused by the pilot injection. Different spray evolutions for the two pilot injection durations were found to strongly influence the flame kernel inception and propagation. PFS with pilot durations of 210 µs and 330 µs showed some differences in terms of shapes of the flame front and in terms of extension of diffusive flames. Yet, both cases were highly repeatable.

Download Full-text

Spark Ignition of SPP Injector Under Sub-Atmospheric Conditions

10.1115/gt2021-58699 ◽

2021 ◽

Author(s):

Qianpeng Zhao ◽

Yong Mu ◽

Jinhu Yang ◽

Yulan Wang ◽

Gang Xu

Keyword(s):

High Speed ◽

Spark Ignition ◽

Test Facility ◽

Propagation Mode ◽

Inlet Temperature ◽

Reacting Flow ◽

Atmospheric Conditions ◽

Flame Kernel ◽

Flame Development ◽

Initial Flame

Abstract The sub-atmospheric ignition performance of an SPP (Stratified Partially Premixed) injector and combustor is investigated experimentally on the high-altitude test facility. In order to explore the influence of sub-atmospheric pressure on reignition performance and flame propagation mode, experiments are conducted under different pressures ranging from 19 kPa to 101 kPa. The inlet temperature and pressure drop of the injector (ΔPsw/P3t) are kept constant at 303 K and 3% respectively. The transparent quartz window mounted on the sidewall of the model combustor provides optical access of flame signals. Ignition fuel-air ratio (FAR) under different inlet pressures are experimentally acquired. The spark ignition processes, including the formation of flame kernel, the flame development and stabilization are recorded by a high-speed camera at a rate of 5kHz. Experimental results indicate that the minimum ignition FAR grows rapidly as the inlet air pressure decreases. An algorithm is developed to track the trajectory of flame kernels within 25ms following the spark during its breakup and motion processes. Results show that the calculated trajectory provides a clear description of the flame evolution process. Under different inlet air pressures, the propagation trajectories of flame kernels share similarities in initial phase. It is pivotal for a successful ignition that the initial flame kernel keeps enough intensity and moves into CTRZ (Center-Toroidal Recirculation Zone) along radial direction. Finally, the time-averaged non-reacting flow field under inlet pressure of 54kPa and fuel mass flow of 8kg/h is simulated. The effects of flow structure and fuel spatial distribution on kernel propagation and flame evolution are analyzed.

Download Full-text