Dynamic Analysis of the Libralato Thermodynamic Cycle Based Rotary Engine

Author(s):  
Guangyu Dong ◽  
Xiaoran Han ◽  
Richard Stobart ◽  
Shuo Lu
2010 ◽  
Vol 2010 ◽  
pp. 1-9 ◽  
Author(s):  
Demos P. Georgiou ◽  
Nikolaos G. Theodoropoulos ◽  
Kypros F. Milidonis

The Meletis-Georgiou is a patented Vane Rotary Engine concept that incorporates separate compression-expansion chambers and a modified Otto (or Miller) cycle, characterized by (Exhaust) Gas Recirculation at elevated pressures. This is implemented by transferring part of the expansion chamber volume into the compression one through the coordinated action of two vane diaphragms. This results into a very high gas temperature at the end of the compression, something that permits autoignition under all conditions for a Homogeneous Compression Ignition (HCCI) version of the engine. The relevant parametric analysis of the ideal cycle shows that the new cycle gives ideal thermal efficiencies of the order of 60% to 70% under conditions corresponding to homogeneous compression engines but at reduced pressures when compared against the corresponding Miller cycle.


2020 ◽  
Vol 92 (1) ◽  
pp. 10906
Author(s):  
Jeroen Schoenmaker ◽  
Pâmella Gonçalves Martins ◽  
Guilherme Corsi Miranda da Silva ◽  
Julio Carlos Teixeira

Organic Rankine Cycle (ORC) systems are increasingly gaining relevance in the renewable and sustainable energy scenario. Recently our research group published a manuscript identifying a new type of thermodynamic cycle entitled Buoyancy Organic Rankine Cycle (BORC) [J. Schoenmaker, J.F.Q. Rey, K.R. Pirota, Renew. Energy 36, 999 (2011)]. In this work we present two main contributions. First, we propose a refined thermodynamic model for BORC systems accounting for the specific heat of the working fluid. Considering the refined model, the efficiencies for Pentane and Dichloromethane at temperatures up to 100 °C were estimated to be 17.2%. Second, we show a proof of concept BORC system using a 3 m tall, 0.062 m diameter polycarbonate tube as a column-fluid reservoir. We used water as a column fluid. The thermal stability and uniformity throughout the tube has been carefully simulated and verified experimentally. After the thermal parameters of the water column have been fully characterized, we developed a test body to allow an adequate assessment of the BORC-system's efficiency. We obtained 0.84% efficiency for 43.8 °C working temperature. This corresponds to 35% of the Carnot efficiency calculated for the same temperature difference. Limitations of the model and the apparatus are put into perspective, pointing directions for further developments of BORC systems.


2011 ◽  
Vol 131 (2) ◽  
pp. 166-170 ◽  
Author(s):  
Yoshihiro Nakata ◽  
Hiroshi Ishiguro ◽  
Katsuhiro Hirata

Sign in / Sign up

Export Citation Format

Share Document