Thermo-Mechanical Fatigue Study of Gasoline Engine Exhaust Manifold Based on Weak Coupling of CFD and FE

2016 ◽  
Author(s):  
Zhien Liu ◽  
Jiangmi Chen ◽  
Sheng-hao Xiao
2011 ◽  
Vol 11 (1) ◽  
pp. 3461-3492
Author(s):  
S.-M. Li ◽  
J. Liggio ◽  
L. Graham ◽  
G. Lu ◽  
J. Brook ◽  
...  

Abstract. This paper presents the results of laboratory studies on the condensational uptake of gaseous organic compounds in the exhaust of a light-duty gasoline engine onto preexisting sulfate and nitrate seed particles. Significant condensation of the gaseous organic compounds in the exhaust occurs onto pre-existing inorganic particles on a time scale of 2–5 min. The amount of condensed organic mass (COM) is proportional to the seed particle mass, suggesting that the uptake is due to dissolution, not adsorption. The solubility decreases as a power function with increased dilution of the exhaust, ranging from 0.23 g/g at a dilution ratio of 81, to 0.025 g/g at a dilution ratio of 2230. The solubility increases nonlinearly with increasing concentration of the total hydrocarbons in the gas phase (THC), rising from 0.12 g/g to 0.26 g/g for a CTHC increase of 1 to 18 μg m−3, suggesting that more organics are partitioned into the particles at higher gas phase concentrations. In terms of gas-particle partitioning, the condensational uptake of THC gases in gasoline engine exhaust can account for up to 30% of the total gas+particle THC. By incorporating the present findings, regional air quality modelling results suggest that the condensational uptake of THC onto sulfate particles alone can be comparable to the primary particle mass under moderately polluted ambient conditions. These findings are important for modelling and regulating the air quality impacts of gasoline vehicular emissions.


1977 ◽  
Vol 99 (3) ◽  
pp. 234-238 ◽  
Author(s):  
J. E. Chart ◽  
H. T. Michels

The performance of several austenitic alloys ranging from low alloy content stainless steels to nickel-base alloys has been evaluated at temperatures from 704–1093°C (1300–2000°F) in cyclic air + 10 percent water vapor and from 704–982°C (1300–1800°F) in gasoline engine exhaust. The gasoline engine exhaust was found to be the more aggresive of the two test environments. A general trend of increasing performance with increasing nickel content was observed. At the highest test temperatures in both tests, the nickel-base alloys clearly displayed superior performance.


Sign in / Sign up

Export Citation Format

Share Document