scholarly journals In vitro quality evaluation of brands of promethazine tablets marketed in Edo State, Nigeria

2021 ◽  
Vol 18 (2) ◽  
pp. 113-121
Author(s):  
Oluwatobi O. Olakojo ◽  
Isah S. Usman
Keyword(s):  
Quality Parameters ◽  
Dissolution Profile ◽  
Disintegration Time ◽  
British Pharmacopoeia ◽  
Continuous Quality ◽  
Weight Variation ◽  
Analysis Of Similarity ◽  
Promethazine Hydrochloride ◽  
Edo State

The increasing number of multisource pharmaceuticals has necessitated the need for continuous quality assessment of products available for atients’ consumption. Promethazine is an anti-histamine used in cases of nausea, vomiting, motion sickness etc. The study was to examine the in vitro quality parameters for ten brands of promethazine hydrochloride tablets sold in retail pharmacies in Edo State, Nigeria. The parameters determined were identification, weight variation, friability, hardness, disintegration, dissolution rate and assay. All samples were evaluated for conformity with British Pharmacopoeia (BP) 2017 standards. Results obtained showed tablet weight ranging from 0.08 g ± 1.77 % to 0.255 g ± 3.557 %, hardness from 4.36 ± 0.58 to 8.33 ± 3.21 kg/cm2, friability of < 1 %, disintegration time of 2.47 ± 0.90 to 69.66 ± 7.23 min and assay of 61.32 ± 2.04 to 183.19 ± 0.11%. The ten batches but one released more than 80 % of their drug content within 30 min. Analysis of similarity factor revealed other samples but PR-7 can be interchangeable with PR-1 based on dissolution profile. The results showed that not all samples examined passed all the pharmacopoeia tests for satisfactory quality. Thus, they all cannot be used interchangeably in clinical practice. Keywords: Promethazine; Quality Control; Dissolution; Pharmacopoeial specifications

scholarly journals In-vitro study of quality control parameters of three different brands of azithromycin tablets

2017 ◽  
Vol 6 (7) ◽  
pp. 1572
Author(s):  
Rashmi Singh ◽  
Monika Saxena ◽  
Deeksha Sahay ◽  
Sujata Singh
Keyword(s):  
In Vitro Study ◽  
Quality Parameters ◽  
Pharmaceutical Companies ◽  
Dissolution Profile ◽  
Test Procedures ◽  
Disintegration Time ◽  
Weight Variation ◽  
Quality Control Parameters ◽  
Standard Value

Background: Azithromycin, being a very important antibiotic, is manufactured by different pharmaceutical companies and available in numerous brands. Therefore, it requires a quantitative evaluation and assessment of tablets chemical, physical and bioavailability properties.Methods: The physicochemical quality pararametrs like weight variation, size, hardness, friability, disintegration time and dissolution profile of three brands of azithromycin tablets were assessed by performing various test procedures according to established methods.Results: The different brands of tablets showed very slight variations in weight and size, not exceeding more than 5% of standard value. Similarly, hardness of all the brands was less than 5kg/f and friability ranged from 0.2 to 0.5%. All the brands tested disintegrated in <6 minutes and all the brands released >75% of the active ingredient within 45 minutes.Conclusions: All the physiochemical quality parameters of three brands of azithromycin tablets were found to be within the pharmacopeial specifications therefore all the brands were pharmaceutically and chemically equivalent and can be freely interchanged.

scholarly journals Comparative Evaluation of Some Commercial Clopidogrel Tablets Available in Yemen

2018 ◽  
Vol 13 (2) ◽  
pp. 79
Author(s):  
Bassam Abduh Ali ◽  
Mohammed Gameel Al-haddad ◽  
Abdullah Ahmed Areqi
Keyword(s):  
Quality Parameters ◽  
In Vitro Dissolution ◽  
Dissolution Time ◽  
Dissolution Profile ◽  
Disintegration Time ◽  
Weight Variation ◽  
Quality Control Parameters ◽  
Variation Range

Clopidogrel is a medication to reduce the risk of heart disease and taken orally. Quality of drug characterizes the production process and every phamaceutical company strives for it but often it is very difficult to achieve. This study was to investigate quality control parameters of some marketed Clopidogrel tablets. To assess the quality, eight different marketed brands of Clopidogrel 75 mg tablets available in Yemeni market collected from different pharmacies in Hodeida city. Different quality parameters like weight variation, hardness, thickness and friability were determined according to established protocols. Then the in-vitro dissolution test, potency, disintegration time were also carried out. UV-spectrophotometer was used to determine the percentage released and assay at 218 nm. All the brands comply the requirements of Pharmacopoeia as they showed acceptable weight variation range. Friability of all brands was less than 1% and no significant differences in disintegration times as they disintegrated within 15 minutes. In case of dissolution profile, all brands except C6 showed acceptable dissolution time as they released more than 60% of drug in 45 minute. The hardness of only two brands was within the range. All brands also meet the potency specifications. This study suggested that most commercially Clopidogrel tablets in Yemen maintain the quality and comply with the pharmacopeia specifications.

scholarly journals Eight enteric-coated 50 mg diclofenac sodium tablet formulations marketed in Saudi Arabia: in vitro quality evaluation

2020 ◽  
Vol 13 (1) ◽  
Author(s):  
Muhammad M. Hammami ◽  
Rajaa F. Hussein ◽  
Reem AlSwayeh ◽  
Syed N. Alvi
Keyword(s):  
Quality Evaluation ◽  
Diclofenac Sodium ◽  
Dissolution Profile ◽  
Disintegration Time ◽  
United States Pharmacopoeia ◽  
Weight Variation ◽  
Tablet Formulations ◽  
Enteric Coated

Abstract Objective To evaluate in vitro quality of enteric-coated 50 mg diclofenac sodium tablet formulations on Saudi market. Results A reference and seven generic (G1-7) formulations were commercially available in December 2019/January 2020 and were assessed within 25–75% of manufacture-expiration period. Weight variation (range as% difference from mean, n = 20), active substance content (ASC, mean (SD) as% difference from label, n = 20), hardness (mean (SD), n = 10), and friability (% weight loss, n = 20) were 97–103%, 102.0% (3.4%), 15.4 (1.1) kg, and 0.24%, respectively, for the reference. For G2-7, they were ≤ ±5%, 98.6% (4.0%) to 109.9% (1.8%), 11.9 (0.9) to 18.3 (0.8) kg, and ≤ 0.00 to 0.75%, respectively. G1 ASC, hardness, and friability were 111.3% (1.7%), 20.1 (1.7) kg, and 1.10%, respectively. Disintegration time (n = 6) and dissolution profile (n = 8) were also determined. No formulation disintegrated or released ˃ 0.1% of label ASC in 0.1 N HCl for 2 h. The reference disintegrated in 15:00 min:seconds and released a mean (range) of 100% (99–103%) of label ASC by 45 min in phosphate buffer (pH = 6.8). G1-7 disintegrated in 8:53 to 20:37 min:seconds and released 81% (69–90%) (G1) to 109%. Except for borderline performance of G1, all formulations passed in vitro quality tests according to United States Pharmacopoeia.

Statistical assessment of in vitro drug release kinetics and quality evaluation of desloratadine orally disintegrating generic tablets available in Bangladesh

2020 ◽  
pp. 174113432094775
Author(s):  
Madhabi Lata Shuma ◽  
Shimul Halder
Keyword(s):  
Release Kinetics ◽  
The United States ◽  
Quality Parameters ◽  
In Vitro Dissolution ◽  
Dissolution Behavior ◽  
Dissolution Profile ◽  
Disintegration Time ◽  
In Vitro Drug Release ◽  
Orally Disintegrating Tablets

The objective of the present study was to compare the in vitro equivalence of different orally disintegrating tablets (ODT) of Desloratadine (DES) available in Bangladesh pharmaceutical market with the reference brand. The in vitro dissolution study was carried out using the United States Pharmacopoeia (USP) paddle method and a comparative study were also carried out with the reference brand. Other pharmacopoeial and non-pharmacopoeial quality assessment parameters including hardness, friability, water absorption ratio, and disintegration time etc. were also evaluated. From the results of the dissolution profile of the commercially available products, it found majority of the products didn’t exhibited compendial requirements in dissolution behavior to the reference brand with model-independent approach ( f2 > 50, f1 < 15) and showed statistically significant differences. Additionally, the data of different physical quality parameters revealed that all commercial products complied with the official specifications. From these findings, it could be suggested that the DES-ODT formulations’ available in the Bangladesh market could be prescribed; however additional experiments might require to clarify the interchangeability among the products.

scholarly journals In-vitro comparative evaluation of quality control parameters between paracetamol and paracetamol/caffeine tablets available in Bangladesh

2012 ◽  
Vol 1 (5) ◽  
pp. 103-109 ◽  
Author(s):  
Palash Karmakar ◽  
Md Golam Kibria
Keyword(s):  
Quality Control ◽  
Pharmaceutical Journal ◽  
Dissolution Profile ◽  
Control Parameters ◽  
Disintegration Time ◽  
Weight Variation ◽  
Quality Control Parameters ◽  
Standard Quality ◽  
Tablet Hardness

Paracetamol is a widely used non-prescription analgesic and antipyretic medicine. The study was conducted to assess the comparative in-vitro quality control parameters through the evaluation of weight variation, hardness, friability, disintegration time and dissolution profile between the commercially available tablet brands of paraceta-mol and paracetamol/caffeine combination in Bangladesh. Tablets of five top level manufacturers those have both of the formulations were evaluated in two groups. Both similarities and dissimilarities were found between the groups. All tablets either paracetamol (1.07 to 2.14%) or paracetamol/caffeine (0.98 to 2.09%) showed acceptable weight variation and friability (below 1%). Formulations were somewhat different in their hardness, disintegration time and dissolution profile. All tablets of paracetamol/caffeine were found harder than paracetamol tablets of the same manufacturer. 1 out of 5 for paracetamol and 3 out of 5 for paracetamol/caffeine tablets exceeded the limit of tablet hardness or crushing strength. The disintegration time in 0.1N HCl of paracetamol tablet brands (24 seconds to 4 minutes 52 seconds) were less than the paracetamol/caffeine (6 minutes 33 seconds to 17 minutes 43 seconds) brands. On the other hand in phosphate buffer, pH 7.4, paracetamol/caffeine tablets dissolved quickly and showed better release profile than tablets containing only paracetamol. It can be concluded that standard quality control parameters always should be maintained not only for paracetamol or its combination but also for all kinds of medicine for getting better drug products.DOI: http://dx.doi.org/10.3329/icpj.v1i5.10282International Current Pharmaceutical Journal 2012, 1(5): 103-109

scholarly journals In vitro Comparative Quality Evaluation of Different Brands of Marketed Paracetamol Tablets Available in Bangladesh

2021 ◽  
pp. 26-32
Author(s):  
Mahfuza Rahman ◽  
Khurshida Akter ◽  
Md. Shahin Sarker ◽  
Jinat Fatema Sharna ◽  
Mir Imam Ibne Wahed
Keyword(s):  
Quality Parameters ◽  
Dissolution Time ◽  
Disintegration Time ◽  
Hardness Tester ◽  
Weight Variation ◽  
Retail Outlets ◽  
General Quality ◽  
Almost All

Aim: This study was performed to evaluate the quality of five brands of Paracetamol 500mg tablets from different manufacturers. Methods: The general quality parameters of these tablets like weight variation, hardness, thickness, diameter, friability, disintegration time and also dissolution time were evaluated according to the established protocols. For measuring weight variation, an electric analytical balance was used. The hardness, thickness and diameter were determined by an automated hardness tester. Friability was measured by a friabilator. Disintegration time and dissolution time were analyzed by disintegration apparatus and dissolution tester respectively. Results: In this study, all the five brands of the tablets passed the BP or USP standards for in vitro evaluation tests with a very slight deviation. All brands complied with the standards for weight variation (550.1±5.88 mg to 631.1±4.71 mg), hardness (121.60±6.6 N to 220.20±7.6), disintegration time (3 minutes 15 seconds to 5 minutes 30 seconds). However, in case of friability, although brand A showed slight deviation, the remaining had shown the satisfactory results with the standard. In addition, the drug release rate of different brands of paracetamol was satisfactory within 30 minutes and ranged from 90.88% to 103.75%. Conclusion: It can be concluded that almost all the tablets of paracetamol purchased from retail outlets in Bangladesh are manufactured and marketed according to GMP. Further work is recommended on bioequivalence of these tablets.

scholarly journals A Comparative Study on In-vitro Quality Control Parameters of Different Brands of Loratadine Tablets Commercially Available in Bangladesh

2021 ◽  
pp. 50-58
Author(s):  
Rosy Fatema ◽  
Sumaiya Khan ◽  
A. S. M. Roknuzzaman ◽  
Ramisa Anjum ◽  
Nishat Jahan
Keyword(s):  
Research Work ◽  
Drug Market ◽  
Quality Standard ◽  
In Vitro Dissolution ◽  
Active Principle ◽  
Dissolution Profile ◽  
Disintegration Time ◽  
Weight Variation ◽  
Local Companies

Loratadine, a second generation H1-receptor antagonist, works by blocking the action of histamine and is widely prescribed for itching, runny nose, watery eyes, and sneezing from "hay fever" and other allergic conditions. To ensure quality the main requirements for a medicinal product are safety, potency, efficacy and stability. This research work aimed to compare and assess the quality levels of different local brands of loratadine tablets available in the drug market of Bangladesh. Six different brands of loratadine 10 mg tablet manufactured by the local companies were used for the analysis. The evaluation was performed through the determination of weight variation, hardness, friability, percent potency, disintegration time, and dissolution profile in accordance with USP-NF specifications. All brands showed acceptable weight variation and % friability. The percent potency for tested samples by UV method ranges from 97.02%-108%, showing none of the brands contains less than 90% of the active principle as per the specification. The result of the physical and chemical studies, such as in-vitro dissolution, disintegration, hardness, etc., has been found to differ but lie within the specified limit. After analyzing the data obtained from the tests, it can be claimed that loratadine 10 mg tablets manufactured and marketed by several local companies in Bangladesh meet the quality standard required to achieve the desired therapeutic outcomes.

scholarly journals In vitro Quality Analysis of Different Brands of Alprazolam Tablet Available in Bangladesh

2015 ◽  
Vol 16 (2) ◽  
pp. 185-188
Author(s):  
Golam Sarwar ◽  
Abhijit Das ◽  
Md Golam Kibria ◽  
Palash Karmakar ◽  
Mohammad Mafruhi Sattar
Keyword(s):  
Chemical Properties ◽  
Pharmaceutical Journal ◽  
Quality Analysis ◽  
Water Medium ◽  
Clinical Effects ◽  
Dissolution Profile ◽  
Disintegration Time ◽  
Weight Variation ◽  
Physico Chemical

Alprazolam is a benzodiazepine anxiolytic commonly prescribed as a sleeping aid and for the treatment of anxiety disorders. The current study was undertaken with the aim of analyzing quality of commercially available brands of alprazolam tablets available in Bangladesh. To assess the quality, locally available 0.25 mg alprazolam tablet of seven different manufacturers were selected and certain physico-chemical parameters like weight variation, hardness, friability, disintegration time and dissolution profile etc. were evaluated using in-vitro analytical methods. All the tablet brands met the requirements of British Pharmacopoeia as they showed acceptable weight variation and friability (below 1%). Brands were slightly different in hardness, disintegration time and dissolution profile from each other. The hardness of all the brands was found to be in the range of 1.50±0.18 to 4.21±0.11 kg-ft. In water medium the disintegration time of all brands were found to be 0.57±0.45 to 2.22±0.23 min. Five out of seven brands showed better dissolution profile as they released more than 90% drug in 30 min. The study revealed that most of the marketed alprazolam tablets met the BP standards for physico-chemical properties which are the indicators of drug quality. It can be concluded that drug products should always comply standard quality parameters that are the prerequisites for getting satisfactory clinical effects. DOI: http://dx.doi.org/10.3329/bpj.v16i2.22302 Bangladesh Pharmaceutical Journal 16(2): 185-188, 2013

scholarly journals Formulation and Evaluation of Loperamide HCl Oro Dispersible Tablets

2020 ◽  
Vol 13 (5) ◽  
pp. 100
Author(s):  
Blasco Alejandro ◽  
Torrado Guillermo ◽  
Peña M Ángeles
Keyword(s):  
In Vitro Dissolution ◽  
Dissolution Profile ◽  
Biomedical Sciences ◽  
Disintegration Time ◽  
Weight Variation ◽  
Orally Disintegrating Tablets ◽  
Wetting Time ◽  
Percentage Of Water Absorption ◽  
Hostile Environments

This work proposes the design of novel oral disintegrating tablets (ODTs) of loperamide HCl with special emphasis on disintegration and dissolution studies. The main goal was augmenting the adherence to treatment of diseases which happen with diarrhea in soldiers who are exposed to diverse kinds of hostile environments. Optimized orally disintegrating tablets were prepared by the direct compression method from galenic development to the industrial scale technique, thanks to strategic and support actions between the Spanish Army Force Lab and the Department of Biomedical Sciences (UAH). The results show that loperamide HCl ODT offers a rapid beginning of action and improvement in the bioavailability of poorly absorbed drugs. The manufactured ODTs complied with the pharmacopeia guidelines regarding hardness, weight variation, thickness, friability, drug content, wetting time, percentage of water absorption, disintegration time, and in vitro dissolution profile. Drug compatibility with excipients was checked by DSC, FTIR, and SEM studies.

scholarly journals CINNARIZINE LIQUID SOLID COMPACTS: PREPARATION EVALUATION

2019 ◽  
Vol 11 (1) ◽  
pp. 150
Author(s):  
Sreenivas Patro Sisinthy ◽  
Shubbaneswarei Selladurai
Keyword(s):  
Angle Of Repose ◽  
In Vitro Dissolution ◽  
Dissolution Profile ◽  
Scanning Calorimetry ◽  
Disintegration Time ◽  
Dsc Studies ◽  
Weight Variation ◽  
Drug Concentrations ◽  
R Value

Objective: The objective of this research was to formulate cinnarizine tablets using the liquid-solid compact technique to enhance its solubility and dissolution rate.Methods: Cinnarizine liquid-solid compacts were formulated using propylene glycol as the non-volatile solvent, Neusilin US2 as the carrier material, Aerosil 200 as the coating material and croscarmellose sodium as the disintegrant. The interaction between drug and excipients were characterized by Fourier-transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) studies. Different batches of liquid, solid compacts were prepared by using varying carrier-coating excipient ratio and different concentration of liquid medication. Flow parameters such as bulk density, tapped density, Carr’s Index, Hausner’s Ratio as well as an angle of repose were used to test the flowability of the powder blend. The liquid-solid compacts were produced by direct compression method and were evaluated for tests such as weight variation, drug content, hardness, thickness, friability, wetting time, disintegration time as well as the in vitro dissolution studies.Results: The results of the preformulation studies of liquisolid compacts showed acceptable flow properties. The results of FTIR and DSC studies showed that there is no drug-excipient interactions. The different R values and concentrations were found to have a marked effect on the dissolution profile. Formulations with higher carrier: coating ratio (R-value) and lower drug concentrations displayed a better dissolution profile. The percentage of drug release of F3 with an R-value of 20 and a drug concentration of 10% was found to be 88.11% when compared to the conventional marketed tablet which released only 44.07% at the end of 2 h.Conclusion: From this research, it is inferred that liquid-solid technique is a promising and effective approach that can be used to enhance the dissolution rate of cinnarizine.

Sign in / Sign up

Export Citation Format

Share Document