scholarly journals ANALYSIS OF MODERN TECHNIQUES FOR SOFTWARE OPTIMIZATION

2021 ◽  
Vol 10 (7) ◽  
pp. 46-55
Author(s):  
Okardi, Biobele Ojekudo ◽  
Nathaniel Akofure
Keyword(s):  
Genetic Algorithm ◽  
Traditional Method ◽  
Optimization Methods ◽  
Optimization Method ◽  
Optimization Techniques ◽  
High Quality ◽  
Artificial Intelligent ◽  
Intelligent Technique ◽  
Artificial Intelligent Technique ◽  
Modern Optimization

Traditional Methods of optimization have failed to meet up the rapid changing world in the demand of high quality and accuracy in solution delivery. Optimization literally means looking for the best possible or most desired solution to a problem. Optimization techniques are basically classified into three groups, namely; the Traditional Method, Artificial Intelligent Method, and Hybrid Artificial Intelligent technique. In this paper, an attempt is made to review literatures on different modern optimization techniques for application in various disciplines. A general review was made on some of the modern optimization methods such as Genetic Algorithm, Ant colony method, Honey Bee optimization method, and Simulated Annealing optimization.

scholarly journals Evaluation of optimization methods for solving the receptor model for chemical mass balance

2015 ◽  
Vol 80 (2) ◽  
pp. 253-264 ◽  
Author(s):  
N. Anu ◽  
S. Rangabhashiyam ◽  
Antony Rahul ◽  
N. Selvaraju
Keyword(s):  
Genetic Algorithm ◽  
Air Quality ◽  
Optimization Methods ◽  
Optimization Method ◽  
Optimization Techniques ◽  
Quality Analysis ◽  
Algorithm Optimization ◽  
Chi Square ◽  
Source Contribution ◽  
Source Contributions

Balance (CMB) model has been extensively used in order to determine source contribution for particulate matters (size diameters less than 10 ?m and 2.5 ?m) in the air quality analysis. A comparison of the source contribution estimated from the three CMB models (CMB 8.2, CMB-fmincon and CMB-GA) have been carried out through optimization techniques such as ?fmincon? (CMB-fmincon) and genetic algorithm (CMB-GA) using MATLAB. The proposed approach has been validated using San Joaquin Valley Air Quality Study (SJVAQS) California Fresno and Bakersfield PM10 and PM2.5 followed with Oregon PM10 data. The source contribution estimated from CMB-GA was better in source interpretation in comparison with CMB8.2 and CMB-fmincon. The performance accuracy of three CMB approaches were validated using R-square, reduced chi-square and percentage mass tests. The R-square (0.90, 0.67 and 0.81, 0.83), Chi-square (0.36, 0.66 and 0.65, 0.43) and percentage mass (67.36 %, 55.03 % and 94.24 %, 74.85 %) of CMB-GA showed high correlation for PM10, PM2.5 Fresno and Bakersfield data respectively. To make a complete decision, the proposed methodology has been bench marked with Portland, Oregon PM10 data with best fit with R2 (0.99), Chi-square (1.6) and percentage mass (94.4 %) from CMB-GA. Therefore, the study revealed that CMB with genetic algorithm optimization method holds better stability in determining the source contributions.

scholarly journals CONSTRUCTAL DESIGN AND SIMULATED ANNEALING EMPLOYED FOR GEOMETRIC OPTIMIZATION OF A Y-SHAPED CAVITY INTRUDED INTO CONDUCTIVE WALL

2015 ◽  
Vol 14 (1) ◽  
pp. 79
Author(s):  
G. V. Gonzales ◽  
E. D. Dos Santos ◽  
L. R. Emmendorfer ◽  
L. A. Isoldi ◽  
E. S. D. Estrada ◽  
...  
Keyword(s):  
Genetic Algorithm ◽  
Simulated Annealing ◽  
Solid Wall ◽  
Internal Heat ◽  
Optimization Methods ◽  
Optimization Method ◽  
Internal Heat Generation ◽  
Geometric Optimization ◽  
Constructal Design ◽  
Optimal Shapes

he problem study here is concerned with the geometrical evaluation of an isothermal Y-shaped cavity intruded into conducting solid wall with internal heat generation. The cavity acts as a sink of the heat generated into the solid. The main purpose here is to minimize the maximal excess of temperature (θmax) in the solid. Constructal Design, which is based on the objective and constraints principle, is employed to evaluate the geometries of Y-shaped cavity. Meanwhile, Simulated Annealing (SA) algorithm is employed as optimization method to seek for the best shapes. To validate the SA methodology, the results obtained with SA are compared with those achieved with Genetic Algorithm (GA) and Exaustive Search (ES) in recent studies of literature. The comparison between the optimization methods (SA, GA and ES) showed that Simulated Annealing is highly effective in the search for the optimal shapes of the studied case.

Intelligent Classification of Palm Oil Tree Pollination Using E-Nose

Mekatronika ◽  
2020 ◽  
Vol 2 (1) ◽  
pp. 28-37
Author(s):  
Abdul Rahim Jalil ◽  
Muhammad Sharfi Najib ◽  
Suhaimi Mohd Daud ◽  
Mujahid Mohamad
Keyword(s):  
Palm Oil ◽  
Case Based Reasoning ◽  
Artificial Intelligent ◽  
Male And Female ◽  
Intelligent Technique ◽  
Insect Activity ◽  
Artificial Intelligent Technique ◽  
Case Based ◽  
Odour Profile

The pollination period is one of the crucial steps needed to ensure crop yield increases, especially in palm oil palm plantations. Most of the research has difficulty determining the pollination period of palm oil. Many problems contribute to this problem, such as difficut to reach and depedency of the polination insect as the insect activity is influenced by the surrounding enviroment.E-Nose can help determine the period by classifiy odour pattern of the male and female palm oil flower. The pattern of each of the flowers were classified using cased – based reasoning artificial intelligent technique. This paper shows the research of the palm oil pollination flower odour profile pattern using case-based reasoning (CBR) classifier.

scholarly journals Genetic Algorithm for Job Scheduling with Maintenance Consideration in Semiconductor Manufacturing Process

2012 ◽  
Vol 2012 ◽  
pp. 1-16 ◽  
Author(s):  
Seungchul Lee ◽  
Jun Ni
Keyword(s):  
Genetic Algorithm ◽  
Semiconductor Manufacturing ◽  
Job Scheduling ◽  
Optimization Methods ◽  
Optimization Method ◽  
Scheduling Problems ◽  
Simulation Based ◽  
Sequencing Problems ◽  
Maintenance Activities ◽  
Single Cluster

This paper presents wafer sequencing problems considering perceived chamber conditions and maintenance activities in a single cluster tool through the simulation-based optimization method. We develop optimization methods which would lead to the best wafer release policy in the chamber tool to maximize the overall yield of the wafers in semiconductor manufacturing system. Since chamber degradation will jeopardize wafer yields, chamber maintenance is taken into account for the wafer sequence decision-making process. Furthermore, genetic algorithm is modified for solving the scheduling problems in this paper. As results, it has been shown that job scheduling has to be managed based on the chamber degradation condition and maintenance activities to maximize overall wafer yield.

Parameter Identification of Thermal Visco-Plastic Model Considering Dynamic Recrystallization

2007 ◽  
Vol 561-565 ◽  
pp. 1869-1874
Author(s):  
Quan Lin Jin ◽  
Yan Shu Zhang
Keyword(s):  
Numerical Simulation ◽  
Genetic Algorithm ◽  
Parameter Identification ◽  
Optimization Methods ◽  
Optimization Method ◽  
Special Program ◽  
Global Optimization Method ◽  
Material Parameters ◽  
Real Coded Genetic Algorithm ◽  
Deformation Test

A hybrid global optimization method combining the Real-coded genetic algorithm and some classical local optimization methods is constructed and applied to develop a special program for parameter identification. Finally, the parameter identification for both 26Cr2Ni4MoV steel and AZ31D magnesium alloy is carried out by using the program. A comparison of deformation test and numerical simulation shows that the parameter identification and the obtained two sets of material parameters are all available.

scholarly journals Optimizing Virtual Private Network Design Using a New Heuristic Optimization Method

2012 ◽  
Vol 2012 ◽  
pp. 1-9 ◽  
Author(s):  
Hongbing Lian ◽  
András Faragó
Keyword(s):  
Genetic Algorithm ◽  
Simulated Annealing ◽  
Design Optimization ◽  
Optimization Problem ◽  
Optimization Methods ◽  
Optimization Method ◽  
Virtual Private Network ◽  
Successful Model ◽  
Search Speed ◽  
Private Network

In virtual private network (VPN) design, the goal is to implement a logical overlay network on top of a given physical network. We model the traffic loss caused by blocking not only on isolated links, but also at the network level. A successful model that captures the considered network level phenomenon is the well-known reduced load approximation. We consider here the optimization problem of maximizing the carried traffic in the VPN. This is a hard optimization problem. To deal with it, we introduce a heuristic local search technique called landscape smoothing search (LSS). This study first describes the LSS heuristic. Then we introduce an improved version called fast landscape smoothing search (FLSS) method to overcome the slow search speed when the objective function calculation is very time consuming. We apply FLSS to VPN design optimization and compare with well-known optimization methods such as simulated annealing (SA) and genetic algorithm (GA). The FLSS achieves better results for this VPN design optimization problem than simulated annealing and genetic algorithm.

scholarly journals Implementation of Genetic Algorithms and Momentum Backpropagation in Classification of Subtype Cells Acute Myeloid Leukimia

2020 ◽  
Vol 14 (2) ◽  
pp. 189
Author(s):  
Dian Mustikaningrum ◽  
Retantyo Wardoyo
Keyword(s):  
Genetic Algorithm ◽  
Genetic Algorithms ◽  
White Blood Cells ◽  
Optimization Method ◽  
Optimization Techniques ◽  
Learning Rate ◽  
Algorithm Optimization ◽  
Selection Parameter ◽  
Acute Myeloid ◽  
Random Trial

 Acute Myeloid Leukimia (AML) is a type of cancer which attacks white blood cells from myeloid. AML subtypes M1, M2, and M3 are affected by the same type of cells called myeloblasts, so it needs more detailed analysis to classify.Momentum Backpropagation  is used to classified. In its application, optimal selection of architecture, learning rate, and momentum is still done by random trial. This is one of the disadvantage of Momentum Backpropagation. This study uses a genetic algorithm (GA) as an optimization method to get the best architecture, learning rate, and momentum of artificial neural network. Genetic algorithms are one of the optimization techniques that emulate the process of biological evolution.The dataset used in this study is numerical feature data resulting from the segmentation of white blood cell images taken from previous studies which has been done by Nurcahya Pradana Taufik Prakisya. Based on these data, an evaluation of the Momentum Backpropagation process was conducted the selection parameter in a random trial with the genetic algorithm. Furthermore, the comparison of accuracy values was carried out as an alternative to the ANN learning method that was able to provide more accurate values with the data used in this study.The results showed that training and testing with genetic algorithm optimization of ANN parameters resulted in an average memorization accuracy of 83.38% and validation accuracy of 94.3%. Whereas in other ways, training and testing with momentum backpropagation random trial resulted in an average memorization accuracy of 76.09% and validation accuracy of 88.22%.

Sign in / Sign up

Export Citation Format

Share Document