Feasibility of Small Wind Turbine via Net Metering in Greek Islands

2021 ◽  
Vol 1 (1) ◽  
pp. 23-28
Author(s):  
D. Daskalaki ◽  
J. Fantidis ◽  
P. Kogias
Keyword(s):  
Wind Speed ◽  
Greenhouse Gases ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Average Wind Speed ◽  
Small Wind Turbine ◽  
Net Metering ◽  
Average Wind ◽  
Environmental Criteria ◽  
Small Wind Turbines

The evaluation of a small 3kW wind turbine through the net metering scheme is studied in this article. 14 near to sea locations in Greece examined with the help of the RetScreen expert software. The simulations based on electrical, financial and environmental criteria. Siros with average wind speed of 6.93 m/s is the most attractive area while Iraklion is the least attractive location. According to the results the simulated project is already economically sound and a small wind turbine in the Greek islands will become a progressively an even more financially source of electricity in Greece. Finally yet importantly is the fact that the use of small wind turbines has as a result that significant amount of Greenhouse gases do not reradiate into the topical atmosphere.

SHAPING OF AN AUTONOMOUS POWER SYSTEM FOR GUARANTEED POWER SUPPLY WITH THE PREDOMINANCE WIND ENERGY

2018 ◽  
pp. 28-50
Author(s):  
S. G. Ignatiev ◽  
S. V. Kiseleva
Keyword(s):  
Energy Storage ◽  
Wind Speed ◽  
Wind Energy ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Energy Demand ◽  
Diesel Generator ◽  
Average Wind Speed ◽  
Wind Speeds ◽  
Average Wind

Optimization of the autonomous wind-diesel plants composition and of their power for guaranteed energy supply, despite the long history of research, the diversity of approaches and methods, is an urgent problem. In this paper, a detailed analysis of the wind energy characteristics is proposed to shape an autonomous power system for a guaranteed power supply with predominance wind energy. The analysis was carried out on the basis of wind speed measurements in the south of the European part of Russia during 8 months at different heights with a discreteness of 10 minutes. As a result, we have obtained a sequence of average daily wind speeds and the sequences constructed by arbitrary variations in the distribution of average daily wind speeds in this interval. These sequences have been used to calculate energy balances in systems (wind turbines + diesel generator + consumer with constant and limited daily energy demand) and (wind turbines + diesel generator + consumer with constant and limited daily energy demand + energy storage). In order to maximize the use of wind energy, the wind turbine integrally for the period in question is assumed to produce the required amount of energy. For the generality of consideration, we have introduced the relative values of the required energy, relative energy produced by the wind turbine and the diesel generator and relative storage capacity by normalizing them to the swept area of the wind wheel. The paper shows the effect of the average wind speed over the period on the energy characteristics of the system (wind turbine + diesel generator + consumer). It was found that the wind turbine energy produced, wind turbine energy used by the consumer, fuel consumption, and fuel economy depend (close to cubic dependence) upon the specified average wind speed. It was found that, for the same system with a limited amount of required energy and high average wind speed over the period, the wind turbines with lower generator power and smaller wind wheel radius use wind energy more efficiently than the wind turbines with higher generator power and larger wind wheel radius at less average wind speed. For the system (wind turbine + diesel generator + energy storage + consumer) with increasing average speed for a given amount of energy required, which in general is covered by the energy production of wind turbines for the period, the maximum size capacity of the storage device decreases. With decreasing the energy storage capacity, the influence of the random nature of the change in wind speed decreases, and at some values of the relative capacity, it can be neglected.

scholarly journals A Simplified Morphing Blade for Horizontal Axis Wind Turbines

2013 ◽  
Vol 136 (1) ◽  
Author(s):  
Weijun Wang ◽  
Stéphane Caro ◽  
Fouad Bennis ◽  
Oscar Roberto Salinas Mejia
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Energy Production ◽  
Turbine Blades ◽  
Wind Turbine Blades ◽  
Annual Average ◽  
Average Wind Speed ◽  
Pitch Control ◽  
Average Wind

The aim of designing wind turbine blades is to improve the power capture ability. Since rotor control technology is currently limited to controlling rotational speed and blade pitch, an increasing concern has been given to morphing blades. In this paper, a simplified morphing blade is introduced, which has a linear twist distribution along the span and a shape that can be controlled by adjusting the twist of the blade's root and tip. To evaluate the performance of wind turbine blades, a numerical code based on the blade element momentum theory is developed and validated. The blade of the NREL Phase VI wind turbine is taken as a reference blade and has a fixed pitch. The optimization problems associated with the control of the morphing blade and a blade with pitch control are formulated. The optimal results show that the morphing blade gives better results than the blade with pitch control in terms of produced power. Under the assumption that at a given site, the annual average wind speed is known and the wind speed follows a Rayleigh distribution, the annual energy production of wind turbines was evaluated for three types of blade, namely, morphing blade, blade with pitch control and fixed pitch blade. For an annual average wind speed varying between 5 m/s and 15 m/s, it turns out that the annual energy production of the wind turbine containing morphing blades is 24.5% to 69.7% higher than the annual energy production of the wind turbine containing pitch fixed blades. Likewise, the annual energy production of the wind turbine containing blades with pitch control is 22.7% to 66.9% higher than the annual energy production of the wind turbine containing pitch fixed blades.

Application of a Genetic Algorithm to Wind Turbine Design

1996 ◽  
Vol 118 (1) ◽  
pp. 22-28 ◽  
Author(s):  
M. S. Selig ◽  
V. L. Coverstone-Carroll
Keyword(s):  
Genetic Algorithm ◽  
Wind Speed ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Energy Production ◽  
Turbine Blades ◽  
Hybrid Approach ◽  
Optimization Method ◽  
Average Wind Speed ◽  
Average Wind

This paper presents an optimization method for stall-regulated horizontal-axis wind turbines. A hybrid approach is used that combines the advantages of a genetic algorithm with an inverse design method. This method is used to determine the optimum blade pitch and blade chord and twist distributions that maximize the annual energy production. To illustrate the method, a family of 25 wind turbines was designed to examine the sensitivity of annual energy production to changes in the rotor blade length and peak rotor power. Trends are revealed that should aid in the design of new rotors for existing turbines. In the second application, five wind turbines were designed to determine the benefits of specifically tailoring wind turbine blades for the average wind speed at a particular site. The results have important practical implications related to rotors designed for the Midwestern US versus those where the average wind speed may be greater.

ANALISA PERFORMA TURBIN ANGIN SUMBU HORISONTAL BERSUDU AIRFOIL MELALUI VARIASI JUMLAH SUDU

ROTOR ◽  
2018 ◽  
Vol 11 (2) ◽  
pp. 18
Author(s):  
Wabang A Jhon ◽  
Abanat D.J Jufra ◽  
Hattu Edwin
Keyword(s):  
Wind Speed ◽  
Kinetic Energy ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Mechanical Energy ◽  
Coefficient Of Performance ◽  
Research Activity ◽  
Average Wind Speed ◽  
Wind Speeds ◽  
Average Wind

Indonesia is an area that has the potential for sufficient wind resources to be utilized for kinetic energy into other energy such as mechanical energy and electrical energy through its generators (generators). The way to utilize wind kinetic energy into other energy is through a device called a wind turbine. Wind turbines have been around since ancient times, and are called airfoil angled wind turbines. This airfoil wind turbine is designed only for areas with average wind speeds above 6m / s. While in Indonesia not all regions have the same wind speed. In certain seasons, the average wind speed is below 6 m / s. This has become a major problem in regions that have average wind speeds below 6 m / s. Seeing this condition, there is a need for scientific research to obtain wind turbines that can be used in areas with average wind speeds below 5m / s. For this reason, the research I want to do is get a wind turbine that can be used as a power plant in areas that have wind speeds below 6m / s. This research was conducted on the basis of scientific theory in fluid mechanics regarding the sweeping area of wind turbines and the performance of variations in the number of blades in the wind. In addition, the research in several scientific journals was used as the basis of this research This research method is an experimental method, in the form of testing a wind turbine axis prototype horizontal and airfoil axis. The details of the research activity are the design and manufacture of laboratory scale horizontal airfoil axis turbines. Next, testing with a fan as a source of wind. The fan used has three variations of speed, all of which are used to determine the lowest average wind speed that can be applied. The results of the research are where wind turbines with the greatest torque and power and the Coefficient of Performance (CP) with the highest value will be used as a result to be applied to the community. Based on experimental data, it can be concluded that the greatest torque and power occur in turbines with 4 blades with details at speed 1, the largest torque and power are 0.201 Nm and 4.5 W; at speed 2, the biggest torque and power are 0.25 Nm and 7.21 W; at speed 3, the biggest torque and power are 0.28 Nm and 8.35 W Keywords: wind turbine, airfoil, nozzle, diffuser

A practical seasonal performance evaluation of small wind turbine in urban environment

2019 ◽  
Vol 43 (4) ◽  
pp. 344-358
Author(s):  
Zakariya Rajab ◽  
Yousef sassi ◽  
Ahmed Taher ◽  
Asharf Khalil ◽  
Faisal Mohamed
Keyword(s):  
Performance Evaluation ◽  
Wind Speed ◽  
Wind Turbine ◽  
Urban Environment ◽  
Output Power ◽  
Energy Production ◽  
Average Wind Speed ◽  
Average Wind ◽  
Small Wind Turbines ◽  
Seasonal Performance

Due to the low environmental impact, smaller storage units, low wind speed, low power system distribution network impact, and low maintenance, small wind turbines have gained more attention. However, the usage of small turbines usually faces several shortcomings, and the actual yield is often lower than expected, generally because the output power is low when compared with the manufacturer, and the actual wind turbine behavior does not reproduces. In a view of performance evaluation of a small wind turbines using high-accuracy measurement devices to measure wind speed and energy production, this article illustrates an experimental seasonal performance evaluation of a 0.5-kW Hummer small wind turbine, placed in an urban environment. In addition, we study the influence of the height in the energy output and analyze its effect in the system performance, which is another aim in this work. Three cases have been carried out: 4 m in order to protect rotor blades during strong winds and storms in the first scenario and 6 m the manufacturing height in the second scenario while 10 m the third case. A 0.5-kW Hummer wind turbine has been installed in Noagia-Benghazi since 2010 for educational purposes, field studies, training, graduate projects, and research. The wind turbine seasonal performance under different periods was obtained and compared in terms of the wind speed, output power, energy production, and average wind speed. The average wind speed is 6.4, 4, 5.8, and 4 m/s, and the average energy production is 948.24, 172.8, 648, and 172.8 kWh in spring, summer, winter, and autumn, respectively. Spring has the highest wind speed followed by winter and autumn then summer for all height. Improvement is attained if the wind turbine tower height is 6 m, and 10 m where more energy is harvested. But the main problem at 10 m is that the system control needs more improvement because the wind speed exceeds 14 m/s which represents the maximum speed. The system can produce about 1.942 MW yearly and save CO2 emissions.

Development and Field Testing of an Inclined Flanged Compact Diffuser for a Micro Wind Turbine

2014 ◽  
Author(s):  
Sandip Kale ◽  
S. N. Sapali
Keyword(s):  
Wind Turbine ◽  
Wind Velocity ◽  
Wind Turbines ◽  
Energy Production ◽  
Cost Effective ◽  
Field Testing ◽  
International Electrotechnical Commission ◽  
Average Wind Speed ◽  
Average Wind ◽  
Power Curves

Micro wind turbines installed in various applications, experience average wind speed for most of the time during operations. Power produced by the wind turbine is proportional to the cubic power of the wind velocity and a small increase in wind velocity results increases power output significantly. The approach wind velocity can be increased by covering traditional wind turbine with a diffuser. Researchers are continuously working to develop a compact, lightweight, cost effective and feasible diffuser for wind turbines. The present work carried out to develop a diffuser with these stated objectives. A compact, lightweight inclined flanged diffuser developed for a micro wind turbine. Bare micro wind turbine and wind turbine covered with developed efficient inclined flanged diffuser tested in the field as per International Electrotechnical Commission (IEC) standards and results presented in the form of power curves. The prediction of annual energy production for both wind turbines determined as per IEC standards.

scholarly journals Remaining Useful Life Estimation of Wind Turbine Blades under Variable Wind Speed Conditions Using Particle Filters

2018 ◽  
Vol 10 (1) ◽  
Author(s):  
Bhavana Valeti ◽  
Shamim N. Pakzad
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Turbine Blades ◽  
Remaining Useful Life ◽  
Structural Components ◽  
Wind Turbine Blades ◽  
Average Wind Speed ◽  
Average Wind ◽  
Useful Life ◽  
Variable Wind

Rotor blades are the most complex structural components in a wind turbine and are subjected to continuous cyclic loads of wind and self-weight variation. The structural maintenance operations in wind farms are moving towards condition based maintenance (CBM) to avoid premature failures. For this, damage prognosis with remaining useful life (RUL) estimation in wind turbine blades is necessary. Wind speed variation plays an important role influencing the loading and consequently the RUL of the structural components. This study investigates the effect of variable wind speed between the cutin and cut-out speeds of a typical wind farm on the RUL of a damage detected wind turbine blade as opposed to average wind speed assumption. RUL of wind turbine blades are estimated for different initial crack sizes using particle filtering method which forecasts the evolution of fatigue crack addressing the non-linearity and uncertainty in crack propagation. The stresses on a numerically simulated life size onshore wind turbine blade subjected to the above wind speed loading cases are used in computing the crack propagation observation data for particle filters. The effects of variable wind speed on the damage propagation rates and RUL in comparison to those at an average wind speed condition are studied and discussed.

scholarly journals Simulation of Multi Blade Rotor Performance at Horizontal Axis by Ansys Version 18.0 Using For Planning Dual Rotor Wind Turbine Models

Teknomekanik ◽  
2018 ◽  
Vol 1 (2) ◽  
pp. 53-56
Author(s):  
Mulyadi Mulyadi ◽  
Hasanuddin Hasanuddin ◽  
Waskito Waskito ◽  
Syahrul Syahrul
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Rotor Blade ◽  
Wind Pressure ◽  
Maximum Pressure ◽  
Average Wind Speed ◽  
Outlet Pressure ◽  
Average Wind ◽  
Pressure Area ◽  
Horizontal Side

The dual rotor wind turbine is a wind turbine which has horizontal and vertical sides. The data obtained in the form of average wind speed, the speed of rotation of the horizontal and vertical vanes. Researchers want to create simulations of multi rotor blade performance on the horizontal side using Ansys application version 18.0. The purpose of this research is looking at changes in wind speed on the outlet area with wind speed sign at the inlet area is 4 m/s. Researchers want to see maximum wind pressure at the inlet area, pressure on the area of the blade, the pressure at the outlet area. The results obtained show that the wind speed in the area of the inlet is of 4 m/s changed to 3.99237 m/s at area outlets. Maximum pressure in the inlet area is of 0.133612 Pa. turn into 457,528 Pa. area blade windmills, to the outlet pressure area turn into 0 Pa.

scholarly journals Evaluation of Wind Potential for the Generation of Electricity in Aliero, Kebbi State

2020 ◽  
pp. 1-7
Author(s):  
A. A. Yahaya ◽  
I. M. Bello ◽  
N. Mudassir ◽  
I. Mohammed ◽  
M. I. Mukhtar
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Wind Power ◽  
Power Density ◽  
Horizontal Wind ◽  
Average Wind Speed ◽  
Wind Power Density ◽  
North East ◽  
Average Wind ◽  
Wind Potential

One of the major developments in the technology today is the wind turbine that generates electricity and feed it directly to the grid which is used in many part of the world. The main purpose of this work is to determine the wind potential for electricity generation in Aliero, Kebbi state. Five years Data (2014-2018) was collected from the metrological weather station (Campell Scientific Model), the equipment installed at Kebbi State University of Science And Technology Aliero The data was converted to monthly and annual averages, and compared with the threshold average wind speed values that can only generate electricity in both vertical and horizontal wind turbines. The highest average wind speed 2.81 m/s was obtained in the month of January and the minimum average wind speed of 1.20 m/s in the month of October. Mean annual wind speed measured in the study area shows that there has been an increase in the wind speed from 2014 which peaked in 2015 and followed by sudden decrease to a minimum seasonal value in the year 2016. The highest wind direction is obtained from the North North-East (NNE) direction. From the results of wind power density it shows that we have highest wind power density in month of January and December with  0.8635 w/ m2 and 0.8295 w/ m2 respectively, while lowest wind power density in the month of October and September with 0.6780 w/ m2 and 0.6575 w/ m2  respectively. Result of the type Wind Turbine to be selected in the study area shows that the site is not viable for power generation using a horizontal wind turbine but the vertical wind turbine will be suitable for the generation of electricity.

scholarly journals Dynamic Modeling of Wind Turbines Based on Estimated Wind Speed under Turbulent Conditions

Energies ◽  
2019 ◽  
Vol 12 (10) ◽  
pp. 1907 ◽  
Author(s):  
Ahmed G. Abo-Khalil ◽  
Saeed Alyami ◽  
Khairy Sayed ◽  
Ayman Alhejji
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Shear ◽  
Large Scale ◽  
Estimation Error ◽  
Turbine Rotor ◽  
Average Wind Speed ◽  
Rotating Speed ◽  
Tower Shadow

Large-scale wind turbines with a large blade radius rotates under fluctuating conditions depending on the blade position. The wind speed is maximum in the highest point when the blade in the upward position and minimum in the lowest point when the blade in the downward position. The spatial distribution of wind speed, which is known as the wind shear, leads to periodic fluctuations in the turbine rotor, which causes fluctuations in the generator output voltage and power. In addition, the turbine torque is affected by other factors such as tower shadow and turbine inertia. The space between the blade and tower, the tower diameter, and the blade diameter are very critical design factors that should be considered to reduce the output power fluctuations of a wind turbine generator. To model realistic characteristics while considering the critical factors of a wind turbine system, a wind turbine model is implemented using a squirrel-cage induction motor. Since the wind speed is the most important factor in modeling the aerodynamics of wind turbine, an accurate measurement or estimation is essential to have a valid model. This paper estimates the average wind speed, instead of measuring, from the generator power and rotating speed and models the turbine’s aerodynamics, including tower shadow and wind shear components, without having to measure the wind speed at any height. The proposed algorithm overcomes the errors of measuring wind speed in single or multiple locations by estimating the wind speed with estimation error less than 2%.

Sign in / Sign up

Export Citation Format

Share Document