FE Model Updating of Tall Buildings Using Output-only Modal Data

2019 ◽  
Vol 29 (1) ◽  
pp. 131-140 ◽  
Author(s):  
Soon Ho Cho
Keyword(s):  
Model Updating ◽  
Tall Buildings ◽  
Fe Model ◽  
Modal Data ◽  
Fe Model Updating ◽  
Output Only

Comparing of Direct and Sensitivity-Base Model Updating Methods in Structural Dynamics and Its Application for Updating of Cantilever Model

2008 ◽  
Author(s):  
K. Abasi ◽  
M. Asayesh ◽  
M. Nikravesh
Keyword(s):  
Structural Dynamics ◽  
Model Updating ◽  
A Priori ◽  
Physical Parameters ◽  
Fe Model ◽  
Structural Components ◽  
Modal Data ◽  
Fe Model Updating ◽  
Fixed Boundary Condition ◽  
Small Rotation

Reliable finite element (FE) modeling in structural dynamics is very important for studies related to the safety of structural components used in industry. FE model updating is a tool to produce these reliable models. The method uses an initial FE model and experimental modal data of the structural components to modify physical parameters of the initial FE model, and a number of approaches have been developed to perform this task. This paper presents an overview of model updating and particularly its application for updating of cantilever model. An example of the need for model updating is a cantilever beam, where often the beam is assumed to be rigidly fixed at the clamped end. However, during tests it is often found that the beam has either a small rotation or deflection at the clamped end. If one has to construct the FE model without the knowledge of the experimental modal data, the natural assumption would be to include an ideal, fixed boundary condition, which may not be true. Even with such a simple structure the FE model is not reliable a priori, and based on intuition or engineering judgments it is difficult to estimate the values of the boundary stiffnesses. However, after creating an initial FE model, the model should be updated based on the experimental modal data obtained from modal tests so that the FE model may be used with confidence for further analysis.

scholarly journals Dynamic Characterisation and Finite Element Updating of a RC Stadium Grandstand

Buildings ◽  
2018 ◽  
Vol 8 (10) ◽  
pp. 141 ◽  
Author(s):  
Filipe Santos ◽  
Corneliu Cismaşiu ◽  
Ildi Cismaşiu ◽  
Chiara Bedon
Keyword(s):  
Finite Element ◽  
Model Updating ◽  
Three Dimensional ◽  
Modal Testing ◽  
Ambient Vibration ◽  
Fe Model ◽  
Modal Parameter ◽  
Ambient Vibration Tests ◽  
Fe Model Updating ◽  
Output Only

This paper reports on the dynamic characterisation of a Reinforced Concrete (RC) stadium grandstand module for the Sporting Stadium in Lisbon. To this aim, a three-dimensional (3D) Finite-Element (FE) numerical model, implemented according to the technical drawings of the structure, is first presented to provide preliminary estimates of the expected modal characteristics for the examined structural system. Ambient vibration tests are then carried out on the same grandstand, and used to extract the natural frequencies and vibration modes of the system, according to conventional state-of-the-art output-only modal parameter identification techniques. A sensitivity investigation and FE model updating study is hence presented for the grandstand, giving evidence of the major influencing parameters and key input data for the numerical fitting of the experimental modal testing results.

scholarly journals Vision-Based Structural FE Model Updating Using Genetic Algorithm

2021 ◽  
Vol 11 (4) ◽  
pp. 1622
Author(s):  
Gun Park ◽  
Ki-Nam Hong ◽  
Hyungchul Yoon
Keyword(s):  
Genetic Algorithm ◽  
Model Updating ◽  
Structural Parameters ◽  
Fe Model ◽  
Structural Members ◽  
Stiffness Reduction ◽  
Before And After ◽  
Scale Test ◽  
Fe Model Updating ◽  
Story Building

Structural members can be damaged from earthquakes or deterioration. The finite element (FE) model of a structure should be updated to reflect the damage conditions. If the stiffness reduction is ignored, the analysis results will be unreliable. Conventional FE model updating techniques measure the structure response with accelerometers to update the FE model. However, accelerometers can measure the response only where the sensor is installed. This paper introduces a new computer-vision based method for structural FE model updating using genetic algorithm. The system measures the displacement of the structure using seven different object tracking algorithms, and optimizes the structural parameters using genetic algorithm. To validate the performance, a lab-scale test with a three-story building was conducted. The displacement of each story of the building was measured before and after reducing the stiffness of one column. Genetic algorithm automatically optimized the non-damaged state of the FE model to the damaged state. The proposed method successfully updated the FE model to the damaged state. The proposed method is expected to reduce the time and cost of FE model updating.

A Multi-State Strategy for Structural Damage Detection Using Sensitivity of Weighted Transmissibility Function

2021 ◽  
pp. 2150144
Author(s):  
Ziwei Luo ◽  
Huanlin Liu ◽  
Ling Yu
Keyword(s):  
Damage Detection ◽  
Structural Damage ◽  
Model Updating ◽  
Structural Parameters ◽  
Experimental Studies ◽  
Fe Model ◽  
Limited Information ◽  
Structural Damage Detection ◽  
State Strategy ◽  
Output Only

In practice, a model-based structural damage detection (SDD) method is helpful for locating and quantifying damages with the aid of reasonable finite element (FE) model. However, only limited information in single or two structural states is often used for model updating in existing studies, which is not reasonable enough to represent real structures. Meanwhile, as an output-only damage indicator, transmissibility function (TF) is proven to be effective for SDD, but it is not sensitive enough to change in structural parameters. Therefore, a multi-state strategy based on weighted TF (WTF) is proposed to improve sensitivity of TF to change in parameters and in order to further obtain a more reasonable FE model for SDD in this study. First, WTF is defined by TF weighted with element stiffness matrix, and relationships between WTFs and change in structural parameters are established based on sensitivity analysis. Then, a multi-state strategy is proposed to obtain multiple structural states, which is used to reasonably update the FE model and detect structural damages. Meanwhile, due to fabrication errors, a two-stage scheme is adopted to reduce the global and local discrepancy between the real structure and the FE model. Further, the [Formula: see text]-norm and the [Formula: see text]-norm regularization techniques are, respectively, introduced for both model updating and SDD problems by considering the characteristics of problems. Finally, the effectiveness of the proposed method is verified by a simply supported beam in numerical simulations and a six-storey frame in laboratory. From the simulation results, it can be seen that the sensitivity to structural damages can be improved by the definition of WTF. For the experimental studies, compared with the FE model updated from the single structural state, the FE model obtained by the multi-state strategy has an ability to more reasonably describe the change of states in the frame. Moreover, for the given structural damages, the proposed method can detect damage locations and degrees accurately, which shows the validity of the proposed method and the reliability of the updated FE model.

Sign in / Sign up

Export Citation Format

Share Document